Jasco UV-2075 Plus HPLC Intelligent UV/Vis Detector Detektor UV-2075 VWD

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Dionex EG40 Eluent Generator was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up but has not been tested further. It passed self tests. It is in good cosmetic condition with minor marks.

LC Packings Switchos Advanced Microcolumn Switching Unit Lab This item was removed from a university (more) where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to test it further at our facility. The screen is quite dim.

GE Healthcare AKTA Avant 150 Chromatography System This was removed from a working lab where it was  (more)surplus to requirements. The unit has been recertified by a service engineer. They were unable to run a full service due to the absence of a control PC, but they gave it clean bill of health and preventative maintenance procedures were carried out. A full report is available on request. GE Healthcare AKTA™️ Avant 150 Chromatography SystemModel: AKTA Avant 150Code#: 28969436Serial#: 2064871Year: 2016/02 Includes the following: AKTA avant Run: Contents.htmlOperating instructions29-1599-54-AA AKTA avant Instrument ConfigurationAKTA avant 25 version 3.2AKTA avant 150 version 2.2

ZWIEBEL calibration weight 5g class E2 INOX Stainless steel laboratory calibration weight Brand: ZWI (more)EBEL Weight: 5 g Type / class: E2 maximum permissible error: ± 0.05mg Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was  (more)surplus to requirements. The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works. The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37. The Rotor number displayed T515.The Buckets Serial number is 0306/01.The buckets Cat Number is 11210335.The number on the bottom of the buckets is Ch. 007027 S.303.The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435. The ALC 2035 Adapter is for 50ml tubes.

This Grant RC 1400G Recirculating Chiller was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and is in reasonable cosmetic condition with some marks from use. We tested it at multiple temperatures and it is in working order.

Ohaus HB2DG Digital Dry Block Heater, 2 Block Temperature Range Ambient +5°C to 120°C Control Digita (more)l Uniformity Within the Block ± 0.1°C at 37°C Features - Offers accurate and fast sample heating with PID microprocessor temperature control - Supports two interchangeable modular blocks with over 40 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Equipped with a clear LED display and easy-to-use touchpad controls with independent displays for temperature and time - Timer from 1 second to 9,999 minutes - Includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB2DG Digital Dry Block Heater offers accurate and fast sample heating with PID microprocessor temperature control, making it perfect for various applications that demand consistent heating. This heater accommodates two interchangeable modular blocks, providing over 40 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB2DG features a robust painted steel housing and is equipped with a clear LED display, easy-to-use touchpad controls with independent displays for temperature and time, and an audible alarm, enhancing usability and precision. This Dry Block Heater also includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints, making it a superior choice for modern lab environments.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB2DG Digital Dry Block Heater, 2 Block includes: - Support Rod Holder with Locking Knob - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes Speed Range (more) 200 to 18,000 RPM (4,500 RPM with included rotor) Maximum Capacity 4 x 200ml Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes is a high-performance centrifuge capable of speeds ranging from 200 to 18,000 RPM (4,500 RPM with the included rotor), with a maximum RCF of 23,542 x g (3,350 x g with the included rotor). With a maximum capacity of 4 x 200ml, this centrifuge is ideal for a variety of applications in the life sciences, including tissue culture and molecular biology. Its timer allows for up to 99 hours and 59 minutes of operation, with the option for continuous use. The Hermle Z327 also has the ability to store up to 99 programs, making it highly customizable for specific experimental protocols. Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes includes: - Z327 Centrifuge - Z327-200 4 x 200ml Swing Out Rotor and 4 x Z327-200-BUK Buckets - 2 x Z327-200-A57 8 x 1.8-7ml Blood Tube Inserts for Z327-200-BUK - 2 x Z327-200-A10 7 x 10/15ml Round Inserts for Z327-200-BUK - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty