Gas analysers

ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to test it further at our facility. Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Tenenergy 10,000 mAh NiMH rechargeable battery1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items:1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x calibration t-fitting1 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

This Varian Gas Chromatograph Model - CP-3800/3380 with Faulty CP-8400 Autosampler was removed  (more)from a university lab. The lab said it was fully working prior to removal, but will need a new autosampler. We have powered it up at our facility but have not tested it further. 1 x Varian Gas ChromatographModel - CP-3800/3380

Servomex Analyser Series 1400 CO2 Analyser This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Servomex Analyser Series 1400 CO2 Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Servomex Analyser Series 1400 CO2 Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

GeoTech G100 Co2 Analyser with Hygroclip 2 Advanced Humidity Sensor Lab This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Included are the following: 1 x GeoTech G100 Co2 AnalyserS/N - IN171951 x HygroClip 2 Advanced seriesS/N - 20684187 1 x GeoTech Cary Case 1 x Sample Tube Kit

Servomex Analyser Series 1400 CO2 Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes user manual.

Servomex 1440 Gas Analyser Double Twin Unit This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but we were unable to test it further at out facility. It is in good cosmetic condition with minor marks from use.

This Gasmet FT-IR Gas Analyser Spectrometer Model - DX4030 was removed from a university lab wh (more)ere it was surplus to requirement. The unit powers up and we have run a hardware check. Acceptable values for hardware parameters: Cell temp: close to ambient tempCell pressure: close to ambient pressureSource intensity: >50% (original =100%) - Unit showed 89%Interf height: >3V when cell is filled with zero gas (original approx 5.5V - Unit showed 3.57VInterf center: 2000...3000 point - unit showed 2483 pointsElectronic temp: 0...50ºC - unit showed 21.43Detector temp: -37ºC - Unit showed -37.08ºCExt detector temp: +25ºC - Unit showed 19.82ºC Nothing seems out on the acceptable values for the hardware parameters. We then ran the Zero Calibration check after flushing the air for 3 minutes.The unit showed - Min: 115.0000 Max: 58825.0000Acceptable values for Maximum background spectrum are >40 000 or >70% of original. The system is in good cosmetic condition but has some minor marks from use. It comes in Hardigg Storm Case with:-2 x Gasmet Battery UnitsGasmet Software CDQuantitech DongleGasmet DongleGasmet DX4030 Quick Reference Cards2 x Black carry cases

This listing is for a Anglicon MPGP Dual Gas Analyser. The unit is in full working condition and is (more) ready for immidate realese. A gas analyzer monitors and controls the concentration of gases for different purposes in industrial processes. They can be used to ensure the safety of the environment, people, and assets and/or to increase process efficiency.

This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working con (more)dition and is ready for immidate realese. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3)   Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift: <0.05% / month full scale <0.05% / month full scale Operating Temperature: 0 – 45°C 0 – 45°C Temp. Compensation: Included 0.02%/°C T90 Response Rate: <50 secs <10 secs

SIEMENS RapidLab 1245 Electrolyte and blood gas analyzer for parts Model: RapidLab 1245 For parts, d (more)oes not work

Mass detector VARIAN Saturn 2000 for CP3800 Gas Chromatographs parts Without Software Without a comp (more)uter For parts

Varian Star 3400 CX gas chromatograph with onboard printer, dual FID detectors and dual split/splitl (more)ess injectors. Note: this unit is sold as is, no warranty applies. This unit turns on but no further tests have been performed.

The MultiExact 4100 is a high-performance multi-gas analyzer designed to provide up to four simultan (more)eous gas stream measurements including: oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N2O), methane (CH4) and moisture (H2O).