Varian Gas Chromatograph Model - CP-3800/3380 Lab

SIEMENS RapidLab 1245 Electrolyte and blood gas analyzer for parts Model: RapidLab 1245 For parts, d (more)oes not work

Designed to maximize turnaround time, RAPIDLab 1200 Systems have the capacity to enhance blood gas t (more)esting efficiency in the clinical laboratory by combining testing speed and reliability with low maintenance. RAPIDLab 1200 systems are our proven solution for high-volume critical care testing sites. Leverage the benefits of RAPIDLab 1200 Systems: Comprehensive test menu addresses a variety of critical care testing needs Intuitive operation and minimal maintenance help increase productivity without increasing staff. Industry-proven accuracy and reliability through long-life Ready Sensor electrode technology Biosafe automatic sampling system with clot detection and clearance Effortless onboard Automatic Quality Control (AQC) for enhanced quality assurance and regulatory compliance Assays Blood gas: pH, pCO2, pO2 Electrolytes: Na+, K+, Ca++, CI- Metabolites: Glucose, Lactate CO-oximetry: tHb, HHb, O2Hb, sO2, COHb, MetHb, Neonatal Total Bilirubin Dimensions (WxHxD): 584 x 572 x 559 mm Weight: 29.5 kg

Dräger X-am 5100 Gas Analyser Lab This item was removed from a university where it was surplus to re (more)quirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

This Varian Gas Chromatograph Model - CP-3800/3380 with Faulty CP-8400 Autosampler was removed  (more)from a university lab. The lab said it was fully working prior to removal, but will need a new autosampler. We have powered it up at our facility but have not tested it further. 1 x Varian Gas ChromatographModel - CP-3800/3380

Servomex Analyser Series 1400 CO2 Analyser This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

This Gasmet FT-IR Gas Analyser Spectrometer Model - DX4030 was removed from a university lab wh (more)ere it was surplus to requirement. The unit powers up and we have run a hardware check. Acceptable values for hardware parameters: Cell temp: close to ambient tempCell pressure: close to ambient pressureSource intensity: >50% (original =100%) - Unit showed 89%Interf height: >3V when cell is filled with zero gas (original approx 5.5V - Unit showed 3.57VInterf center: 2000...3000 point - unit showed 2483 pointsElectronic temp: 0...50ºC - unit showed 21.43Detector temp: -37ºC - Unit showed -37.08ºCExt detector temp: +25ºC - Unit showed 19.82ºC Nothing seems out on the acceptable values for the hardware parameters. We then ran the Zero Calibration check after flushing the air for 3 minutes.The unit showed - Min: 115.0000 Max: 58825.0000Acceptable values for Maximum background spectrum are >40 000 or >70% of original. The system is in good cosmetic condition but has some minor marks from use. It comes in Hardigg Storm Case with:-2 x Gasmet Battery UnitsGasmet Software CDQuantitech DongleGasmet DongleGasmet DX4030 Quick Reference Cards2 x Black carry cases

New generation! The OHAUS Scout Scale, with its large backlit LCD display and integrated educational (more) software is the ideal tool for use in the classroom. Offering world-class overload protection, fast stabilization times, increased capacity, more connection options, and a stackable design—the ultimate educational weighing experience. - Excellent overload protection and practical stackable design - Backlit LCD display and 4-button operation: very easy to use in all conditions - High weighing speed and high resolution display The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options ensure a more modern and smarter student experience, increasing accuracy and efficiency. Other Standard Features and Equipment Transport lock, stainless steel weighing pan, menu and adjustment lockout switch, software and mechanical overload/underload protection, stability indicator, auto tare, low battery indicator, auto power off user selectable print options and communication settings. Applications Weighing: allows you to calculate the weight of the samples in the selected unit of measure. Density determination: calculation of the density of solids or liquids. With the built-in weigh below hook, you can test for the specific gravity of objects that cannot be placed on the weighing pan. Molar Concentration: Calculate the mass of a sample and automatically convert to the molar concentration. MODELS AVAILABLE: Applications Weighing, determination of density, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth™ (available as an accessory) Construction ABS housing, stainless steel bowl, ABS draft shield (1 mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Project features Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software over/underload protection, low battery indicator, auto power off, auto tare, span calibration mass included in models with capacity up to 620 g NO MORE BROKEN SCALES! The excellent overload protection of the Scout balance consists of a weighing pan made of high-strength stainless steel and a pan support made of impact-resistant plastic. The system allows the balance to safely support loads up to 10 times its rated capacity, withstanding use in even the most demanding educational environments. In addition, the integrated transport lock protects the load cell from damage during transport, stacking and storage.

MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar Ultimate Vacuum 253 mbar (more) (190 Torr) Pumping Speed 12 L/Min Number of Heads 1 Head Features - Provides clean and uncontaminated air exhaust with a built-in filter - Automatic cooling exhaust system allows for 24-hour continuous use - Customizable vacuum and gas velocity settings for specific applications - TEFLON surface treatment protects against gas corrosion, enhancing durability - Delivers a pumping speed of 12 L/Min for effective operation - Achieves a vacuum level of 253 mbar (190 Torr) for efficient performance The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump is designed for efficient and reliable operation in environments that require clean and uncontaminated air exhaust. This pump features an oil-free design with a built-in filter, ensuring that the exhausted air remains free from contamination. The MS-VP250 is equipped with an automatic cooling exhaust system, allowing for continuous 24-hour operation, making it ideal for demanding laboratory and industrial settings. Its pressure-adjustable design enables precise control of vacuum and gas velocity to meet specific application requirements. The pump's TEFLON surface treatment provides robust chemical and corrosion resistance, ensuring durability even when exposed to harsh gases. With an ultimate vacuum of 253 mbar (190 Torr) and a pumping speed of 12 L/Min, the MS-VP250 delivers efficient vacuum performance. It features 6 mm inlet and outlet flanges, operating within a temperature range of 7°C to 40°C. The pump runs quietly with a noise level of less than 60 dBa, making it suitable for environments where low noise is essential. Its compact design, measuring 7.7 x 3.8 x 6.1 inches, and a weight of 7.6 kg, make it easy to fit into various setups. The pump is equipped with nitrile butadiene rubber valves for reliable operation and requires a motor power of 75W, compatible with electrical requirements of 110/220V, 50/60Hz. The MS-VP250's distinctive orange color not only enhances its aesthetic appeal but also signifies its robust anticorrosive and chemical resistance properties, making it a reliable choice for a wide range of vacuum applications.INCLUDED: The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Pfeiffer MVP 070-3 Diaphragm Pump Final Pressure 1 hPa / 0.75 Torr / 1 mbar Maximum Pumping Speed  (more)4.3 m3/h / 2.53098 cfm / 71.6681 l/min Number of Heads/Stages 2/4 Features - Diaphragm pump with a pumping speed of up to 4.3 m3/h - No hydrocarbons: Completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Simple logistics: Our diaphragm pumps are suitable for all voltages worldwide - Fulfills cleanroom class ISO 8 (according to DIN EN ISO 14644-1) The Pfeiffer MVP 070-3 Diaphragm Pump is an advanced, oil-free solution engineered to deliver reliable, clean vacuum performance without hydrocarbons. With a maximum pumping speed of 3.8 m³/h at 50 Hz and 4.3 m³/h at 60 Hz, this pump is built for optimal efficiency in diverse lab applications. Designed with a final pressure of 1 hPa / 0.75 Torr / 1 mbar, the MVP 070-3 ensures precise vacuum control while maintaining an exceptionally low integral leak rate of 0.002 Pa m³/s, minimizing contamination risks. Certified to meet cTUVus standards under UL / CSA 61010-1 and protected by an IP40-rated enclosure, this pump meets rigorous safety requirements and offers robust performance across a wide range of applications. Supporting versatile input voltages (100–115 / 200–230 V AC at 50 Hz and 100–115 / 120 / 200–230 V AC at 60 Hz) with a ±10% tolerance, the MVP 070-3 is well-suited for global use. It operates with a noise level of only 52 dB(A) (EN ISO 2151), ensuring a quiet laboratory environment, while its air-forced convection cooling method maintains optimal operation. Featuring compact G ¼'' connection flanges, a max intake and exhaust pressure of 1,100 hPa, and a lightweight build of 16.4 kg, this diaphragm pump offers easy integration into lab setups. With no gas ballast needed, the MVP 070-3 promises efficient, maintenance-friendly operation, perfect for labs requiring clean, reliable, and durable vacuum systems. INCLUDED: ThePfeiffer MVP 070-3 Diaphragm Pump includes: - Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The PS.X7 series represents a new advanced level for precision balances. The X7 series balances feat (more)ure the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. Databases in X7 series balances In new PS.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 10 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Weighing Data Management USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.