NST Emission Analyser Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

This Oxford Intelligent Level Meter ILM 210 was removed from a university lab where it was surplus t (more)o requirements. The unit powers on but we were unable to test it further. The unit shows an error on the display, but this is down to it not being connected to gas. It was not tested further. It is in good cosmetic condition with some minor marks from use.

This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working con (more)dition and is ready for immediate release. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3)   Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift: <0.05% / month full scale <0.05% / month full scale Operating Temperature: 0 – 45°C 0 – 45°C Temp. Compensation: Included 0.02%/°C T90 Response Rate: <50 secs <10 secs

SIEMENS RapidLab 1245 Electrolyte and blood gas analyzer for parts Model: RapidLab 1245 For parts, d (more)oes not work

Manufacturer: Environics-IUT Model: ENVI-Air GC-IMS-Analyzer S/N: IM0911.120011 YoM: 2012 Descripti (more)on: The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air. It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance. The ENVI-Air can detect hazardous gases at far lower concentrations than traditional analyzers and react in real-time. This gives the operator a longer safe response window to take corrective action.It is based on GC-IMS technology. Ion Mobility Spectrometry (IMS) is a simplified atmospheric pressure time-of-flight technique that is highly selective with low ppb to % sensitivity. The GC-IMS adds multi-component separation prior to the IMS analysis. ENVI-Air does not require the use of paper tape, pre-concentrators or chemical reagents.The ENVI-Air is an industrial solution virtually drift free and unaffected by humidity or temperature changes and will be factory calibrated for the compounds of interest for maximum accuracy and reliability. Because of the simplicity of design and limited moving parts, ENVI-Air analyzers will have the lowest maintenance and downtime of any current analyzer system. Measurable Compounds: Ammonia, Acetone, Acrylonitrile, Acetonitrile, Arsine, Benzylchlorid, Bromine, Chlorine, Chlorocyane, BTX, CMME, Ethylene Oxide, Dibutylphthalat (DMP), Dimethylsulfat, HFPO, Hydrazin, Hydrogen Chloride, Hydrogen Bromide, Hydrogen Fluoride, Hydrogen sulfid, TDI, Methyl Bromide, Isopropyl alcohol, Methyl Iodide, Nitrogen dioxide, NMP, PFIB, Phosgene, Phosphine, PGME, PGMEA, Sulfur Dioxide, Triethylamine, Vinyl Chloride. Areas of application: - Oil and Gas Production- Plastics Manufacturing- Semiconductor Fabrication- Chemical Production- Pharmaceutical Manufacturing- Gas Pipeline Safety- Medical Sterilization- Primary Metal Processing Specifications: - Detection Principle: Gas Chromatography - Ion Mobility Spectrometry (IMS)- Ionization: Tritium (3H) No Licence or Wipe Tests Required- Sensitivity: Low ppb range- Moisture: 0% to 90% RH- Warm Up Time: 20 minutes- Measurement Time: Seconds- Power: 220 VAC/19VDC - Carrier Gas: No Carrier Gas Required- Operation Temperature: -10°C to +50°C- Storage Temperature: -40ºC to +50ºC - Enclosure: 19” Rack Mount- Power: 220 VAC/19VDC - Dimensions (L x W x H): 483 x 381 x 89 mm - Weight: 6.44 kg Items delivered: - Environics-IUT ENVI-Air GC-IMS-Analyzer- Instruction manual Condition: The item is in perfect coasmetic as well as operarting condition. It is 100% functional teasted and ready to be used.

Dräger X-am 5100 Gas Analyser Lab This item was removed from a university where it was surplus to re (more)quirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. This item includes the charging dock and additional Type E, Type I and Type A plug fittings.

ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Sampling Wand for localised detection2 x Tenenergy 10,000 mAh NiMH rechargeable batteries1 x Intellicharger Newi2 charger with power cable1 x Dwyger Instuments Minimaster flow meter1 x 1/4" straight connector1 x USB cable1 x hard carry case

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Arctiko SF 500 -60°C Low Temperature Chest Freezer Temperature Setting -30°C / -60°C Volume 13.0 cu. (more) ft. (368L) Cooling System Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - The user friendly XR30CX controller is standard and includes different alarms such as visual, acoustic, probe failure, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - Features a premade access port, making it easier to monitor or inspect the unit with external probes - 100% HCFC &amp; CFC free The Arctiko SF 500 -60°C Low Temperature Chest Freezer is a compact low temperature chest freezer designed to work in high traffic labs. The single compressor technology ensures a quick pulldown, fast recovery time, and high temperature uniformity throughout the compartment, even with multiple door openings. The single compressor technology is also specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. The technology featured in this unit ensures the best possible storage capacity per square meter of any chest freezer model in the market. The SF 500 has optimized internal storage for the best overlook. With the included stackable basket and the optional stainless steel front rack storage system, samples will be easily accessible at any time. This freezer includes a premade access port, making it easier to monitor or inspect the unit with external probes. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. INCLUDED: The Arctiko SF 500 -60°C Low Temperature Chest Freezer includes: - Key for Door Lock - 3 x Stackable Baskets - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Memmert IN30 Natural Convection Incubator 32L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 32 L Features - 32 L (1 cu.ft.) stainless steel chamber for compact sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit ensures precise monitoring - ControlCOCKPIT with SingleDISPLAY, featuring an adaptive digital PID-microprocessor controller with high-definition TFT display - Natural convection system for consistent temperature distribution - Electronically adjustable air flap for pre-heated fresh air admixture - Max chamber load of 132 lbs for high-capacity sample handling - Autodiagnostic system with adjustable overtemperature monitor for added safety The Memmert IN30 Natural Convection Incubator 32L, 115V is a reliable, compact solution for precise temperature control in laboratory applications. With a 32 L (1 cu.ft.) stainless steel chamber, this incubator is designed to handle diverse sample needs within a temperature range from at least 5°C above ambient to +80°C. Equipped with a highly accurate Pt100 sensor DIN class A in a 4-wire circuit and the ControlCOCKPIT SingleDISPLAY digital PID-microprocessor, adjustments are easily managed on its high-definition TFT display. The natural convection system ensures uniform temperature distribution throughout the chamber, while an electronically adjustable air flap allows pre-heated fresh air flow. The incubator supports a maximum chamber load of 132 lbs and incorporates an autodiagnostic system with adjustable overtemperature monitoring for dependable performance and safety. INCLUDED: The Memmert IN30 Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

VWR Mini Vortex Mixer The VWR Mini Vortex Mixer: a compact is a user-friendly lab essential. With a  (more)durable head for tubes up to 30mm, stability is ensured by the refined steel base. Terrific for a variety of applications, with the ability to powerfully vortex tubes up to 30mm. Features: - Extremely compact and easy to operate - Powerful vortexing for tubes up to 30 mm - Head is made of durable material to ensure long life - Refined steel base is designed to ensure product stability INCLUDED: The VWR Mini Vortex Mixer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 6 Months Parts and Labor Warranty VWR Mini Vortex Mixer Technical SpecificationsCatalog Number10153688Speed3,000 RPMOrbit4.5 mmTube diameter (maximum)≤30 mm (1.18")Product Dimensions W x D x H3.8125" x 3.375 96 x 85 mmShipping Weight0.55 KgDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Hermle Z216 MK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control  (more)- Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40°C) - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty