Sakura Tissue-Tek 4715 Embedding console system

This listing is for the Becton Dickinson FACSCalibur Flow Cytometer. It is being sold as the unit on (more) its own without cables or software, it needs its laser replaced, otherwise it is in full working condition.The Becton Dickinson FACSCalibur Flow Cytometer offers aunique approach to flow cytometry, allowing users to perform both cell analysisand cell sorting in a single system, providing flexibility for a variety ofresearch and clinical applications. The BD FACSCalibur is a fully integratedmultiparameter system that has the performance and sensitivity to ensureobjective and reproducible results through the use of dual-laser technology,interbeam compensation, and an alignment-free optical design. Efficientcollection optics, coupled to the flow cell with an optical gel, permit the useof a low-powered, air-cooled argon laser and a red diode laser to ensure thehigh sensitivity required for analysis of low-density antigens.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Accessories S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. RIPF60VL: perforated metal shelf (1 max). CFNUBL: activated carbon electric fan. For more information on the products and safety systems available, we invite you to our dedicated post 'LITHIUMSAFE'.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Entirely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. ACCESSORIES Q120: QUARANTINE PATENTED extinguishing system with tank for 120 model. LSSA: automatic fire extinguisher. LSCR: automatic fire extinguisher with control panel, smoke and temperature sensor, beacon. CEGSM: GSM dialer. S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. S12: UNEL 220V 12-position electrical multiple socket. RIP120LS: perforated shelf for 120cm cabinets. INTAKE SYSTEMS DIAM125BP: electric aspirator. CSF100BPAMY11: ATEX electric fan. CFN: molecular aspiration system certified according to standard NFX15-211. Per ulteriori informazioni sui prodotti e i sistemi di sicurezza disponibili, ti invitiamo al nostro post dedicato "LITHIUMSAFE".

AREX 6 by Velp Scientifica The central button activates the heating of the plate only after pressing (more) it, avoiding involuntary switching on. The safety icon informs the operator that the plate is at temperature, preventing possible burns. It will remain illuminated until the temperature is below 50°C. The knobs allow precise speed and temperature regulation with new ergonomics and greater sensitivity. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX 6 is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX 6 is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Digital thermoregulation with VTF By connecting VTF digital thermoregulators, your AREX 6 transforms into a superior tool, with a built-in timer to schedule activities. The thermoregulator is ideal for multiple applications and meets the most demanding requirements in terms of precision, reliability and flexibility of use thanks to the innovative FUZZY LOGIC Technology. Automatically adapts thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows better alignment with the set temperature (with an accuracy of ± 0.5 °C.) and less initial 'overshoot' (initial discrepancy compared to the set temperature). Furthermore, VTF is equipped with a system to simplify installation on the support rod and facilitate positioning of the Pt100 probe in the most commonly used containers. The two clamps allow height adjustment while a sliding clamp allows horizontal adjustment. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs

VE floor scale produced by Ohaus - IP65 The VE series is the ideal choice for weighing that require  (more)high resistance, in dry environments or with the presence of water, in commercial and industrial applications. Available with square or rectangular platforms, built to minimize flexing due to heavy loads, they feature a unique combination of value, quality and strength that any business can rely on. IP65: The upper junction box made of stainless steel is protected from dust and water Indicator: backlit LCD display with large easily visible digits; operation with hermetic rechargeable battery; piece counting function and a bidirectional RS232 interface. Applications Weighing, piece counting Display Backlit liquid crystal display (LCD) Operation Power cord (included) or rechargeable battery (included) Communication Easy access communication port with RS232 interface (included) Structure IP65 stainless steel indicator with hinged front cover and eye bolt mounting holes, stainless steel platform, IP65 stainless steel junction box with side access, 5mm top plate, 4 alloy steel H8C IP67 load cells OIML R60 approved. Construction features 125% overload protection Technical features: Maximum capacity 1500 kg Resolution 0,5 kg Battery life 58 hours with rechargeable battery Authorization for trade: CE type approved Platform structure: Stainless steel Power supply: AC power supply (included); Rechargeable battery (included) Tare range: At flow by subtraction Caratteristiche tecniche: