Horizon SPE-DEX 4790 Controller

This listing is for the Becton Dickinson FACSCalibur Flow Cytometer. It is being sold as the unit on (more) its own without cables or software, it needs its laser replaced, otherwise it is in full working condition.The Becton Dickinson FACSCalibur Flow Cytometer offers aunique approach to flow cytometry, allowing users to perform both cell analysisand cell sorting in a single system, providing flexibility for a variety ofresearch and clinical applications. The BD FACSCalibur is a fully integratedmultiparameter system that has the performance and sensitivity to ensureobjective and reproducible results through the use of dual-laser technology,interbeam compensation, and an alignment-free optical design. Efficientcollection optics, coupled to the flow cell with an optical gel, permit the useof a low-powered, air-cooled argon laser and a red diode laser to ensure thehigh sensitivity required for analysis of low-density antigens.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Accessories S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. RIPF60VL: perforated metal shelf (1 max). CFNUBL: activated carbon electric fan. For more information on the products and safety systems available, we invite you to our dedicated post 'LITHIUMSAFE'.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Safety cabinet for lithium batteries CSF711/L LITHIUMSAFE CHEMISAFE, with accessories: 12-position electrical multiple socket; fire extinguisher with smoke detector.

HOW DOES 'QUARANTINE' WORK? 1 - A fire breaks out inside the safety cabinet. 2 - The automatic syste (more)m overturns the shelves and slides the batteries stored in the cabinet into a tub. 3 - Inside the water tank the batteries are placed in a sort of quarantine which will not only definitively extinguish the fire but also exclude the possibility of self-combustion. ACCESSORIES Electrical sockets are not standard. Contact us for your custom configuration.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CARATTERISTICHE - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass plug. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image the focus on the internal FBN fire extinguisher. Recommended accessories: - Charging points: 4x10 sockets. Contact us for more information.

Tuttnauer 1730M Autoclave The Tuttnauer 1730M Autoclave is designed to compliment any healthcare fac (more)ility. The bright new easy-to-use panel was designed with the operator in mind. The 1730M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. INCLUDED: The Tuttnauer 1730M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Ohaus FC5816R Frontier Multi-Pro Refrigerated Centrifuge w/ Selectable Rotor Speed Range 200 to 16,0 (more)00 RPM Maximum Capacity 4 x 250ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5816R Frontier Multi-Pro Refrigerated Centrifuge w/ Selectable Rotor includes: - FC5816R Frontier Multi-Pro Refrigerated Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Microstar 30 Control Overhead Stirrer Speed Range 0/30 to 500 RPM Viscosity Max. 20,000 mPas St (more)irring Quantity Max. 20 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 20,000 mPas and volumes of up to 20 l - Continuously adjustable speed between 0/30 – 500 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself:

Eppendorf 2 x 50ml Adapters, Cat. # 5804785002 The Eppendorf 2 x 50ml Adapters, Cat. # 5804785002 ar (more)e for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 2 x 50ml conical skirted bottom tubes each with the maximum tube dimensions (Diameter x Height) of 31mm x 120mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 2 x 50ml Adapters, Cat. # 5804785002 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 2 x 50ml Adapters, Cat. # 5804785002 SpecificationsBottom ShapeFlatRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor

Crest P1800D-45 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transduce (more)r technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P1800D-45 Digital Ultrasonic Cleaner with Power Control combines advanced technology with user-friendly features, making it an essential tool for precision cleaning applications. Featuring ceramically enhanced transducer technology and homogenous sound field distribution, it operates at a frequency of 45 kHz, ensuring thorough cleaning and enhanced sample preparation capabilities. With adjustable cleaning time and bath temperature ranging from 20°C to 80°C, it offers versatility for various cleaning needs. The "D" models include nine-step ultrasonic power adjustment and a Degas function, optimizing cleaning performance. Its deep-drawn stainless-steel tank with rounded corners facilitates easy cleaning, while an intrinsically safe heater with dry-run protection ensures safe operation. Ideal for removing flux from PCBs, oils, paints, and other contaminants, the Crest P1800D-45 guarantees reliable performance backed by a 2-year manufacturer's warranty. INCLUDED: The Crest P1800D-45 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty