IKA C-MAG HP 7 Hotplate

When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consi (more)stently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow. Advanced PureSure Deionization – Eliminates trace ions that leach into your water and provides advanced warning to change the purification packs. Fully Recirculating –  Ensuring microbial purity and guaranteeing pure water at the point-of-use. Real-time TOC Monitoring – Provides complete confidence in organic purity. Integrated Filtration – Ultrafiltration or microfiltration filters out endotoxins, proteins, nucleases, and particulates. Full Spectrum UV Treatment Dispense Flowrate Up to 2.0 l/min Inorganics (at 25°C): 18.2 MΩ.cm Total organic carbon (TOC): 1 – 3 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively neutral Particles: < 0.05 µm RNase: <1 pg/ml DNase: <5 pg/ml Purification pack capacity: Liters to 18.2 MΩ.cm = 94,100/(µS/cm + (2.3 x ppm CO2)) Source – originally from potable supply, then pretreated: Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or distilled. Fouling index (max): 1 (5 – 10 micron membrane prefilter is recommended for all non-RO feeds Service deionization (SDI) – MΩ.cm: 1 MΩ.cm minimum resistivity at exhaustion Reverse Osmosis (RO) – µS/cm: Recommended <30 µS/cm Free Chlorine: 0.05 ppm max TOC: <50 ppb max (RO feed) Carbon dioxide: 30 ppm (max recommended) Silica: 2 ppm (max recommended) Particulates: Filtration down to 5 – 10 micron advisable to protect internal and/or point of use filters Temperature: 1 – 35°C (Recommend 10 – 15°C) Flowrate (maximum requirement): 130 l/hr (34 USG) Drain requirements: Up to 2 l/min (0.5 USG) Feedwater pressure: 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum Dimensions (HxWxD): 435 x 375 x 340 mm Weight: 19 kg Excluding new filters

The RS 1 Repro Stand is a non-reflective matt gray base plate with a printed scale (cm and inch). Th (more)e column is equipped with a spirit level for extra precision. The camera is mounted on the column with the arm and has a load capacity of up to 4 kg. Base plate (WxDxH): 450 x500x 28 mm Column height: 1000 mm Maximum load capacity: 4kg Material: Aluminium Quick release plate: Yes Thread: 1/4|3/8 in Spirit level: Yes

Leica TP 1020 Tissue Processor This system was removed from a university laboratory where it was sur (more)plus to requirements. The unit is in good, clean condition, though the left-hand sliding door is cracked. This does not affect operation. The unit powered on with the screen and controls working correctly. Carousel movement on all axis. Specifications:- Model: TP 1020-_-1 - Serial No.: 3741/03.2009 - Activated carbon fume filter installed: 23-08-11 - Wax bath capacity: 1.8 litres (2 baths) - Reagent container capacity: 1.8 litres (10 containers) - Version: V1.13 - Number of programs: 9 - Wax bath temperature range: 45˚C - 65˚C - Excess temperature cut-out: 75˚C ± 4˚C Wax bath test results:- First bath stabilised at 68.7˚C - Second bath stabilised at 69.2˚C - (Tests were conducted without wax.)

PHARMACIA DIAGNISTICS AB UNICAP100 V1 laboratory analyzer for parts Model: UNICAP 100 Without a comp (more)uter For parts, does not work

Motic Moticam X5 Plus Microscope Camera Highest Live Display Mode 1920x1080 Pixels Capture Resolutio (more)n 4MP Maximum Frames per Second (FPS) 30 FPS Features - 4MP (2560x1440 pixels) capture resolution - 1280x720, 1920x1080 pixels (Full HD) live display - Data transfer: Wi-Fi (2.4 &amp; 5 GHz), Ethernet (RJ-45) - 30 Frames per second (depending on Wi-Fi strength) - CMOS sensor type (1/3-inch); C-mount lens mount The Motic Moticam X5 Plus is a 4 MP digital microscope camera with Wi-Fi and ethernet data transfer. The Moticam X5 Plus turns your microscope into a Wi-Fi station, allowing you to share your images with up to six devices at the same time by logging into MotiConnect from your tablet or smartphone. The Moticam X5 Plus follows our All-In-One-Box methodology. This means that with the included focusable lenses, eyepiece adapters, and glass calibration slide, you can convert almost any conventional microscope into a digital microscope. View, edit, capture and store your images in the blink of an eye, view live images on multiple wireless devices, and share your work with anyone in just a few clicks. The MotiConnect App makes data sharing possible in a collaborative environment, encouraging teamwork and collective learning experiences. Connect your Moticam to your computer if you wish to work with our well-known software Motic Images Plus 3.1, which comes included in the package as a download Click Here to View Product Video INCLUDED: The Motic Moticam X5 Plus Microscope Camera includes: - CS ring adapter - 12mm Focusable lens - Eyepiece adapters - Motic 4-dot calibration slide - Motic Images Plus for Windows/OSX/Linux (download) - MotiConnect (free app download) - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Boekel Scientific 151250 Digital Forced Air Incubator, 2.5 cu. ft. w/ Removable Light Shield, 115V T (more)emperature Range Ambient +8°C to 70°C Temperature Uniformity ± 1.0°C at 37°C Chamber Volume 2.5 cu. ft. (71L) Features - Forced air convection provides excellent temperature stability, uniformity, and recovery time after door opening to keep incubation environment at ideal temperature - Wide temperature range for multiple applications eliminates the need for multiple incubators for different temperature ranges - Single door configuration with removable door panel for light &amp; dark incubations eliminates multiple incubators/multiple doors - Bright easy-to-use digital display with built-in timer - Energy efficient, low-power consumption design - Internal auxiliary outlet provides power for one accessory to be used within the incubator - UL, CE, CSA approved, RoHs compliant making it 100% recyclable - 2 Year Manufacturer's Warranty