Leica Reichert Ultracut S Microtome & Controller Lab

Shandon AS325 Rotary Microtome This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up with an internal battery and is mechanically sound. It is in good cosmetic condition with minor marks.

Bright Refrigerated Cryostat Microtome OTF/AS This was removed from a university lab where it was su (more)rplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

This listing is for a Medite A550 Rotary MicrotomeDeveloped and manufactured by experts in GermanyTh (more)e fully automatic Microtome A550 is the premium model for use in histology and histopathology as well as in research laboratories and in industrial quality assurance. With this microtome version, both the horizontal feed and retraction and the vertical cutting stroke are motorized. This means physical relief for the user during intensive, long-term use. Alternatively, the cutting stroke can also be carried out manually using the smooth-running handwheel, if, for example, sensitive cuts are necessary for very fragile tissue samples. The handwheel can easily be locked in any position using a spring lever. The proven, high-precision microtome mechanism is developed and produced in Germany and ensures maximum sectioning quality for continuously high sample throughput.The Microtome A550 impresses with its high functionality and attractive design that are focused on optimal ease of use. Settings relevant to the sections are entered via the intuitively operated membrane keyboard with digital display. The background color is freely selectable.The upper rotary push button on the left is used to switch between fine and coarse adjustment and to scroll through the menu. With the middle, larger rotary push button, the specimen clamp is simply moved back and forth. This can also be done using the keyboard. The sectioning speed can be set with the lower rotary push button and two different speeds can be selected for trimming and fine sectioning.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Leica 2035 BioCut Microtome its the perfect manual microtome if your applications involve routine se (more)ctioning of paraffin or plastic-embedded specimens. You can be assured stability when operating the Leica BioCut 2035 Microtome thanks to the vertical guide-way, the rigidity of the feed-system as well as the a built-in specimen retraction feature. The combination of these features along with a mechanical trimming device should make the Leica 2035 the ideal microtome for manual sectioning. Section range: 1 – 60 µm Trimming at 15 an 30 µm Smooth hand-wheel rotation Easy Specimen cassette orientation Low/High profile disposable blades holder

VACUUBRAND ME 8C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar Max. pumping speed at 60 Hz 4 (more).6 cfm Number of Heads/Stages 4/1 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Compact design - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms for increased reliability and extended operating life. These large pumps have an exceptionally high pumping speed. The NT-series features further improved performance data and superior vapor tolerance. Large one-stage chemistry-design diaphragm pumps are an excellent choice for pumping large amounts of gases and vapors. They do not consume water and therefore do not produce any contaminated waste water. Typical applications are degassing of liquids, multiport filtrations e. g. on vacuum networks and in general evaporation of low boiling solvents. We recommend these pumps especially for processes with large gas flow at high process pressures.INCLUDED: The VACUUBRAND ME 8C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KGW Isotherm Type FB-0-CAL flat bottom Dewar flask with grip and flexible applications in laboratory (more), cooling of small samples, storage of liquid nitrogen (LN2), dry ice (CO2) or other refrigerants,storing and  internal short-distance transport,  suitable for use on magnetic stirrers or as an insulating flask. Antimagnetic aluminum cover. Borosilicate interior 3.3.. Maximum LN2 capacity of 150 mL, evaporation rate of 0.25 L/d. Chamber dimensions (Ø*height) 37*140 mm; totals (Ø*height) 58*170 mm.

Galileo GAHW-50 small Ultra-low freezer. Capacity 50 L. Temperature range from - 40 ℃ to - 86 ℃. Rap (more)id cooling. Danfoss compressor. 110 mm foam insulation. Microprocessor based temperature controller. LCD digital display. USB port. Password protected parameter settings. Audible and visual alarms of: high / low temperature, power failure, low battery, door open, and system failure. Stainless steel interior. Bolt. Double silicone gasket. Wheels. Low noise. Low consumption. CE marking. Optional: Chart Recorder, CO2 back up system, printer, RS232, RS485, remote alarm.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Polyscience P60NNA101B IP-60 Immersion Probe Cooler, 1.5” Ø Rigid Coil Probe with 180° bend, -60° to (more) -20°C, 120V, 60Hz3D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60NNA101B IP-60 Immersion Probe Cooler, 1.5” Ø Rigid Coil Probe with 180° bend, -60° to -20°C, 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty