Leica Reichert Jung Biocut 2035 Rotary Microtome Rotationsmikrotom Mikrotom

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Leica Model Jung RM2035 Rotary Microtome was removed from a university lab where it was surplus (more) to requirements. The unit moves smoothly and is mechanically sound. It is in good cosmetic condition with minor marks from use.

This Leica Reichert Ultracut S Microtome & Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. The lights work, and the microtome itself is mechanically sound. Leica Reichert Ultracut SType - 702501SN - 420699 StereoZoom 6Zoom Range 0.67X - 4.0X 2 x Eye Pieces 15X W.F. Stereo (31-05-62) ControllerType - 654901SN - 89465

Leica Reichert Ultracut S Ultramicrotome and Controller This was removed from a university lab where (more) it was surplus to requirements. The units all power up and the microtome is mechanically sounds, but only the top light is working. It is in good cosmetic condition with minor marks. Leica Reichert Ultracut S UltramicrotomeModel: Ultracut S Ultramicrotome 702501Serial#: 420626 2x Eyepieces:Cambridge instrumentsPart#: 31-05-62 Leica Reichert AG Control PanelModel: 654901Serial#: 89378

This Bruker ImagePrep Sample Preparation Matrix Deposition Device was removed from a university lab  (more)where it was surplus to requirements. The unit is in good used cosmetic condition but it does have some marks and signs of use. It powers up fine and we have been through a few of the menus and they all work as they should. We were unable to test further as it requires a gas supply etc. We were told by the lab manager that it needed additional parts to make it operational, though we are unsure what exactly the fault is. It comes with a touch pen.

BioSpherix Xvivo System X2 isolated workstation for cell culture work under controlled conditions. M (more)ultiple incubation chambers, with independent O2/CO2/RH programming. The incubation sub-chambers have doors that open into the area for handling with gloves in an aseptic environment controlled by temperature, O2 and CO2. O2 control from 0.1% to 99.9% is possible in each incubator. Low humidity interior atmosphere in the crop handling chamber that reduces the risk of contamination. Heatable interior atmosphere and work surface. Chambers for housing equipment (microscopes, bioreactors, centrifuges, pipetting stations, refrigerators, lyophilizers, cell sorters, robots, FACS, etc.) also with controlled atmospheres. Control of the O2 level also in the SAS or exchange lock for the input/output of material and samples. Software control on a PC for easy documentation and data logging, even allows remote control. Modular and completely enclosed workstation, without requiring the expulsion or extraction of air. Modular system, can be expanded in the future. The BioSpherix X2 closed incubation system is an attractive cleanroom alternative. With the Xvivo System Model X2, good manufacturing practices are easier to achieve, risk is reduced in many ways, and the speed of implementation is much faster and easier. The Xvivo System X2 model, available through its sister company, Biospherix Medical, is designed to process and produce cells in compliance with regulatory GMPs. The BioSpherix Xvivo System Model X2 is the world's only proven modular cytocentric aseptic containment isolator.

Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 749 L (26.4 cu. ft.) Features - Temperature range from -12°C to +60°C with optimal performance between +16°C and +34°C - Large capacity of 749 L (26.4 cu. ft.) to accommodate high-volume storage - Equipped with an inner glass door for clear visibility while maintaining chamber integrity - Precise temperature control with 0.1°C setting accuracy and dual Pt100 sensors for mutual monitoring - Energy-saving CFC-free cooling and heating system (R134a refrigerant) with efficient automatic defrosting - TwinDISPLAY control system with dual high-definition TFT displays and multilingual settings - AutoSAFETY system with integrated over- and undertemperature protection to ensure safe operation - Constructed with a durable, corrosion-resistant stainless steel interior and zinc-plated steel housing The Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V offers advanced temperature control within a spacious 749-liter chamber, making it ideal for applications requiring precise cooling and heating cycles. With a temperature range of -12°C to +60°C and optimal performance at ambient temperatures between +16°C and +34°C, this unit accommodates a variety of temperature-sensitive materials. The incubator features an inner glass door, allowing clear visibility while ensuring the integrity of the chamber’s environment. Designed with dual Pt100 temperature sensors in a 4-wire circuit, it provides reliable monitoring and backup functions to maintain accuracy within 0.1°C. Equipped with Memmert’s TwinDISPLAY technology, the ICP750 offers easy adjustments through dual high-definition TFT displays and supports multiple languages. Its energy-efficient, CFC-free cooling and heating system with R134a refrigerant, coupled with an automatic defrost function, ensures optimal temperature management. Safety is prioritized with the integrated AutoSAFETY system, which offers over- and undertemperature protection and visual and acoustic alarms for maximum operational security. Constructed from durable stainless steel with a zinc-plated rear housing, the ICP750 embodies both functionality and resilience, making it a reliable choice for high-demand laboratory environments. INCLUDED: The Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.