Horizon SPE-DEX 4790 Controller

pH controller for the Electrolab FerMac 200 fermentation system. The FerMac 260 features a high impe (more)dance integrated amplifier to ensure accurate pH measurement and to accommodate a wide variety of pH electrodes. The pH controller uses industry standard peristaltic pumps.

Nikon BioStation Controller BS-ERG 810240 Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and goof mechanical order, we are unable to test it further at our facility.

Shimadzu UV-VIS Spectrophotometer UV-2401PC & TCC Temperature Controller Lab This system was rem (more)oved from a university lab where it was surplus to requirement. All included units are in good cosmetic condition and power on, we are unable to test them further as a system at our facility. This system comprises the following: - Shimadzu UV-2401PC            Serial No. A10834432670 - Shimadzu TCC-240A Temperature Controlled Cell Holder - Shimadzu TCC-Temperature Controller           A103844

Wheaton 6-Tier Roller Apparatus Cat No 348970CE This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver. It is in good cosmetic condition with minor marks

Edwards D39590000 ADC Active Digital Vacuum Gauge Controller, Standard Version, 1 Gauge Active Gauge (more) Compatibility APG Series (including 200, legacy APG, and APGX-H) & WRG Series (including 200 and legacy WRG) Display High brightness green LED display 12mm (0.47 in. high) Choice of Units mbar, Torr, Pa, Volts Features - Simply plug in the mains supply, connect the gauge, and the ADC displays the measured pressure - Supports Edwards gauges with a total measuring range of 2000 to 1 x 10⁻⁹ mbar (1500 to 7.5 x 10⁻¹⁰ Torr) - The ADC and Edwards gauges address a broad spectrum of laboratory and industrial applications - Bright LED display gives clear long distance readability - Displays in mbar, Torr, Pascal or Volts - Compact with small 1/8 DIN enclosure, may be panel or bench mounted - Push-button control makes operation highly intuitive The Edwards D39590000 ADC Active Digital Vacuum Gauge Controller is a streamlined and efficient tool for vacuum measurement, suitable for a range of laboratory and industrial applications. This compact controller features a bright LED display, providing clear readability from a distance, and simple push-button controls for ease of use. It is designed to automatically recognize and integrate with compatible Edwards gauges such as the APG200, WRG200, AIM200, and ASG2 ranges, loading the appropriate look-up table and displaying the pressure in commonly used units like mbar, Torr, Pascal, or Volts. The standard version of the ADC can display the pressure measured by a single active gauge. Its compact size allows for flexibility in installation, fitting easily into a small 1/8 DIN enclosure that can be mounted on a panel or positioned on a bench. To operate, simply connect the mains supply and attach the gauge to immediately begin pressure monitoring, making it a cost-effective choice for managing process vacuum. INCLUDED: The Edwards D39590000 ADC Active Digital Vacuum Gauge Controller, Standard Version, 1 Gauge includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller & 6-Position Microplate PlatformThe new  (more)Orbi-Shaker CO2-MP is designed for thorough, mixing of microplates in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 65°C and humidity levels up to 100%.To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller can magnetically mount to the outer walls of the incubator and allows the user to set and adjust the shaker settings without opening the chamber door(s). A 6 position microplate platform is included and secures both standard or deep well plates. Click Here to View Product Video INCLUDED: The Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller & 6-Position Microplate Platform includes: - Rubber Mat Microplate Platform 13 x 12 in - Power Cord - Operator's Guide - Manufacturer Documentation - 2 Year Manufacturer's Warranty

Miltenyi Biotec Auto Macs Pro Separator System Lab This system was removed from a university lab whe (more)re it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system does not include the required Fluid Bottles, which are available for purchase from the manufacturer's website.

F1 Mass Standard - knob weights with adjustment chamber. Nominal value - 20 g.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The PS.X7 series represents a new advanced level for precision balances. The X7 series balances feat (more)ure the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. Databases in X7 series balances In new PS.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 10 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Weighing Data Management USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Ohaus 30400183 Modular Heat Block, 20 x 15 mm Vials The Ohaus 30400183 Modular Heat Block, 20 x 15 m (more)m Vials is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400182 Modular Heat Block, 20 x 12 mm Vials includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

SCILOGEX SCI340-Pro Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Senso (more)r & Sensor StandThe SCI340-Pro is one of the most technically advanced hotplate-stirrers in the marketplace. With independent back-lit LCD displays for both heat and stirring functions and PID technology and controls temperature at +/- 1ºC. It also incorporates a DC brushless motor for extremely long life and excellent performance. SCILOGEX 340°C magnetic hotplate stirrers include all leading safety standards and features for superior ease of use and are cost-effective. They are widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals, etc.Product Features - Heat only, stir only or heat and stir together functions, High-resolution LCD display shows actual temperatures and speed - Digital speed control with max. speed up to 1500rpm - External temperature control is possible by connecting the optional temperature sensor(PT-1000) with accuracy at ±0.2°C - Max. stirring quantity of H2O at 20L - RS232 function provides PC control and data transmission (free software available) - The “HOT” warning will flash if the plate temperature is above 50°C even when the hotplate is turned off - Automatic spin bar retrieval - Low temperature stability - Microprocessor temperature control - Stainless steel work plate with ceramic coating provides excellent chemical-resistance - Accessory reaction blocks for flasks and vessels sold separately - Electronic speed control for constant speed even during changes in load - Brushless DC motor is maintenance free - High magnetic adhesion - Free software for control data logging by PC - Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar Click Here to View Product Video INCLUDED: The SCILOGEX SCI340-Pro Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - PT 1000 Temperature sensor and stand - Two Year Manufacturer's Warranty