Battery / Powersupply UPS

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Safety cabinet for lithium batteries CSF711/L LITHIUMSAFE CHEMISAFE, with accessories: 12-position electrical multiple socket; fire extinguisher with smoke detector.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. ACCESSORIES Q60: QUARANTINE PATENTED extinguishing system with tank for 60 model FBN: automatic fire extinguisher FPC: automatic fire extinguisher with control panel, smoke and temperature sensor, beacon S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. RIPF60VL: metal shelf, 490x420x39mm INTAKE SYSTEMS DIAM125BP: electric aspirator CSF100BPAMY11: ATEX electric fan CFN: molecular aspiration system certified according to standard NFX15-211 For more information on the products and safety systems available, we invite you to our dedicated post 'LITHIUMSAFE'.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. CHEMISAFE QUARANTINE SYSTEM Thanks to this patented system, in the event of a fire inside the safety cabinet, an automatic response will be activated to overturn the shelves, thus allowing the batteries to fall into a water tank located at the bottom. By immersion, the fire will be promptly extinguished and the potential risk of self-ignition will be effectively neutralised. Simple and very effective system! The cabinet is equipped with a water pump and algaecide. The QUARANTINE versions have only 3 shelves instead of the basic 4. Demonstration video of the QUARANTINE system.

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. TECHNICAL VISUALIZATION 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp Graph of pump characteristics in Alpha Lauda models: Alpha LAUDA immersion thermostat: simple and quick to install.

Ohaus light-duty orbital shakers These reliable OHAUS laboratory shakers are instruments designed fo (more)r applications with loads up to 4 kg. To optimize sample mixing, two stirring orbits and speed ranges are available. One digital model intended for use with microplates, two digital models designed for use with accessories, and an affordable analog unit for daily shaking. All models are equipped with triple eccentric drive and integrated chip control systems that ensure precise, stable and reliable platform shaking for laboratories and beyond. - Flexible: with tray and a non-slip mat or, by removing the mat, the unit can be customized with over 20 accessories - Affordable and efficient for daily laboratory shaking needs Applications ELISA tests, cell cultures, immunoassays, protein studies, bacterial and yeast cultures, dyes / bleaches, absorption techniques, DNA studies Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum Construction features Non-slip mat (29.9x22.2 cm) included in all models except the model with microplates

IKA TWISTER, 2 pcs. Magnetic stirrer, 2 pcs. RPM Range 100 - 3000 rpm Weight 0.6 kg Power 10W Feat (more)ures - Universal & Compact: Versatile mixing device with a magnetic drive. - Multi-Position Capability: Expandable up to 30 stirring positions. - High Performance: Mix up to 5 liters at max speed of 3000 rpm. - Versatile Attachments: Transforms into a stirrer or a shaker. - Innovative Operating Concept: Intuitive 360° LED glass display. - Robust & Safe: High protection class IP 66 for harsh conditions. - Award-Winning Design: Recognized with the Reddot Award 2022. TWISTER is a universal and compact mixing device with magnetic drive. TWISTER SET 2 is multi-position magnetic stirrer with two drive units. In the default version, TWISTER is a powerful single-position magnetic stirrer for mixing up to 5 liters at a maximum speed of 3000 rpm and a viscosity of up to 500 mPas. By connecting additional TWISTER stirring units (available as accessories, ID no. 0020112621), TWISTER can be expanded to a multi-position magnetic stirrer with up to 30 stirring positions.* The stirring positions can be controlled either separately or simultaneously (leader-follower principle). Versatile accessories With the multi-position stirring attachment TW.IX, the drive is transformed into a magnetic stirrer with 9 stirring positions for efficient mixing of sample vessels with small volumes (8 - 60 ml). The TW.VX shaker attachment transforms the universal magnetic drive into a vortex or orbital shaker. Innovative operating concept TWISTER enables a new way of interaction between user and laboratory instrument. Via the intuitive and chemically resistant 360° LED glass display, all information is intuitively conveyed without any alpha-numeric display. During operation, either the speed or the power required for stirring can be displayed. For example, viscosity changes can be observed and displayed as a percentage. Mixing can be started by pressing a button as well as (thanks to integrated beaker recognition) by placing or touching the beaker. The reverse function changes the direction of rotation at definable time intervals. This leads to a significant improvement of the mixing result, especially with samples that are difficult to mix. Robust and safe The high protection class IP 66 allows operation under harsh conditions. TWISTER can thus be cleaned under the tap, for example, or operated in an incubator at temperatures up to 40°C. The compact and innovative design has already been awarded the reddot Award 2022. It is particularly suitable for use in laboratories with limited space. * Depending on the number of devices, a different power supply may have to be used. The included power supply is designed to power up to two devices.Click Here to View Product Video INCLUDED: The IKA TWISTER, 2 pcs. Magnetic stirrer, 2 pcs. includes: - TWISTER S099 (2 pcs.) - Power Supply - IKAFLON® 25 Magnetic stirring bar (2 pcs.) - Two Year Manufacturer's Warranty

Benchmark SureTherm CO2 Incubator, 180L, 115V w/ High Heat Decontamination, Split Window Door and O (more)2 Control Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and CO₂ control, Benchmark’s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C). These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real time”. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.* * Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)