Weiss Technik WETK 0130 Temperature Cabinet

The KNAUER Online Degasser is a 2-channel for semi-preparative flow rates up to 50 ml/min. The degas (more)sing membrane is an innovative Teflon AF fluoropolymer which is more than 200x more gas permeable than regular Teflon and has excellent physical and chemical stability characteristics. Its high efficiency also allows for reduced internal chamber volumes– less than 7.7 ml per channel. For isocratic HPLC applications the 2 chambers of the semi-prep degasser can be connected in series for maximum degassing efficiency. For gradient applications, up to 2 eluents can be degassed simultaneously. For special applications, one degasser can also be used for multiple HPLC systems. The low dead volume makes reconditioning fast and minimizes solvent waste. Extremely low chamber volumes. Broad chemical compatibility is perfect for use in general HPLC applications Zero hysteresis even at higher flow rates No need to replace check valves or other parts even when under continuous operation Prevents air bubble spikes in the chromatogram Minimizes retention time fluctuations Minimizes gradient reproducibility problems Minimizes unwanted formation of chromophores which can disturb UV detection Minimizes unwanted oxidation or reduction which can disturb electrochemical detection Minimizes fluorescence quenching Technical Data: Dimensions: 85 x 165 x 315 mm (W x H x D) Weight: 2.5 kg Power Supply: 85 – 265 V, 47 – 63 Hz, 20 W Max. Flow Rate: up to 50 ml/min Number of Channels: 2 Degassing Method: gas permeation through Teflon AF amorphous fluoropolymer membrane Degassing Efficiency: < 0.5 ppm residual dissolved O2 at 1 ml/min Dead Volume: 7.7 ml Solvent Applicability: universal, except hydrochloric acid and halogenated hydrocarbons especially hexafluoro isopropanol (HFIP) Wetted Materials: PEEK, Tefzel, Teflon AF Vacuum Chamber: polypropylene and stainless steel

This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to (more) requirements. The unit powers up and was tested with a digital thermometer. It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C. The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.

Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps GENIE Temp-Shaker 300 with Un (more)iversal Ratcheting Clamps provides high speed orbital shaking from 35 to 300 RPM. Precise temperature control from 28C to 75C, for use in many laboratory applications. The GENIE Temp-Shaker has a unique 3-way access clear dome chamber.Scientific Industries Genie Temp Shaker w/ Universal Ratcheting Clamps Specifications Speed (RPM) 35-300 RPM Temperature Range 28C - 75C Orbit 19mm Product Weight 9 Kg (20 lbs.) Overall (D x W x H) 450 X 480mm (17.6 x 19in) Platform Capacity 3 Kg (6.6 lbs) Platform Dimension 305 x 305mm (12 x 12in) Chamber Volume 40 L (2400 cubic inches) Chamber Height 305mm (12in) Warranty 24 months Markings CE

Corepoint Scientific NSRI231WSW-0H Single Solid Door Temperature and Humidity Stability Chamber Temp (more)erature Setpoint Range 4°C to 70°C Humidity Setpoint Range 15 to 95% RH Capacity 23 cu. ft. (651.3L) Features - Engineered for stringent scientific and laboratory research requirements - Advanced design in cabinet construction, refrigeration, temperature control, and monitoring - One right-hinged, self-closing solid door and three 304 stainless steel sliding tray shelves - PID controller with LCD display, programmable ramp and soak functions, and USB data port - Foamed-in-place polyurethane foam insulation and white powder-coated steel exterior - Top-mounted variable speed compressor and hydrocarbon natural refrigerant (R600a) - Ultrasonic humidification and multi-element proportional electric heating - Heavy-duty door handle, magnetic door gasket, keyed door lock, and probe access port The Corepoint Scientific NSRI231WSW-0H Single Solid Door Temperature and Humidity Stability Chamber is engineered to meet the stringent requirements of scientific and laboratory research. This chamber features advanced design elements in cabinet construction, refrigeration, temperature control, and monitoring, ensuring energy-efficient, safe, and reliable performance for optimal storage environments. It includes one right-hinged, self-closing solid door and three 304 stainless steel sliding tray shelves. The PID controller with an LCD display offers programmable ramp and soak functions, process phase graphic animations, a USB data port, RS-485 communication (MODBUS-RTU), real-time clock, battery backup, and event logs. The chamber provides precise temperature control (4°C to 70°C) with ± 0.1°C accuracy and uniformity of ± 1°C. Humidity control ranges from 15 to 95% RH with ± 0.1%RH accuracy and stability of ± 3% RH. Additional features include foamed-in-place polyurethane foam insulation, a white powder-coated steel exterior, a 304 stainless steel interior, plenum air distribution, a floor drain, top-mounted variable speed compressor, hydrocarbon natural refrigerant (R600a), ultrasonic humidification, multi-element proportional electric heating, and shielded interior LED lighting. The chamber also includes a heavy-duty door handle, magnetic door gasket, keyed door lock, and a probe access port. INCLUDED: The Corepoint Scientific NSRI231WSW-0H Single Solid Door Temperature and Humidity Stability Chamber includes: - Key for Door Lock - 3 x Sliding Shelves - Power Cord - Operator's Manual - 18 Month Manufacturer's Warranty

MSL Digital laboratory magnetic stirrer: for large volumes and low viscosity in the Life Science and (more) Pharmaceutical fields. - Preparations in buffer solution - Buffer preparation and WFI (Water for Injection) - Vaccine production - Cell cultures and tissue cultures Powerful and simple - The brushless motor guarantees continuous operations for high volumes - The LCD display allows you to set the speed precisely - Shakes volumes up to 8 liters (H2O) - Agitation speed from 40 to 1500 rpm - The lightweight design makes the MSL 8 Digital easy to move, saving valuable lab bench space - SpeedServoTM technology guarantees constant speed even when the viscosity changes - Equipped with timer to program your activities (1 to 99 min) In full safety - The control panel is splash protected for maximum durability - The stainless steel top guarantees unparalleled resistance - The lock function eliminates the risk of unwanted setting changes - Designed to last over time - Soft start to keep splashes to a minimum - Reverse timed rotation for effective mixing without increasing speed (5s to 99min55s) - MSL allows you to stop mixing for a certain period with the intermittent timer function. TECHNICAL FEATURES IN BRIEF Stirring system: Brushless motor. Structure: metal with epoxy paint; stainless steel top. Speed ​​range: 10rpm. Feedback: SpeedServo technology Reversal of stirring direction: Yes, from 5s to 99min55s. Continuous operations: Yes. Lock function: Yes. Intermittent mode: Yes. Display auto-off: Yes, after 10 sec.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Wesemann / Door cabinet, LT / White /  730x500x580

F2 Mass Standard - knob weights, wooden box. Nominal value - 2000 kg.

SCILOGEX SCI550-S LED Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Sens (more)or &amp; Sensor StandThe SCILOGEX SCI550-S provides powerful heating and stirring with LED digital display of the set temperature and real-time temperature display. LED heating and analog stirring are simply controlled turning the respective control knobs. Product Features - LED display for precise monitoring of temperature - A wide speed range of 50 to 1500rpm - Heat only, stir only or heat and stir together functions - Max. Heating plate temperature 550°C - Low temperature stability - Electronic speed control for constant speed even during changes in load - External temperature control is possible by connecting the temperature sensor(PT1000) with accuracy at ±0.2°C - High magnetic adhesion - “HOT” warning will flash if the work plate temperature is above 50°C even when the hotplate is turned off Click Here to View Product Video INCLUDED: The SCILOGEX SCI550-S LED Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Sensor &amp; Sensor Stand includes: - Power Cord - PT 1000 Temperature sensor and stand - Two Year Manufacturer's Warranty

Hermle Z496-1L-A15 12 x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk The Hermle Z496-1L-A15 12 (more) x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 12 x 15ml adapters. INCLUDED: The Hermle Z496-1L-A15 12 x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk includes: - 12 x 15ml adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty