T&D RTR-52A Wireless Temperature Recorder

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition. The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

This Thermo Scientific Revco UXF Ultra Low Temperature Freezer was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition with marks from use. 4 x Shelves - 71 x 69cm Model - Revco UXFModel no. UXF50086V63SN - 0132487401131018

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg Capac (more)ity 42 g / 210 g Readability 0.01 mg / 0.1 mg Repeatability 0.02 mg / 0.1 mg Features - Precision semi-micro balance with dual-range readability of 0.01 mg / 0.1 mg for high-accuracy applications requiring consistent, reliable results across a wide dual capacity range - Splash/Dust Proof Membrane Keypad - Easy to clean antistatic breeze break, ABS housing, and SS pan, spill ring, dust plate & base floor - Stable die cast aluminum base with built-in internal weight that performs automatic self-calibration - Easy to see large .7in (17.8mm) LCD display with simple 6 button keypad interface - Super visible front mounted spirit level bubble helps reduce leveling time and increase accuracy - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Space saving footprint and collapsible doors maximize valuable bench space and reduce breeze break mishaps - Handy step card and door control lever opens either side of the weighing chamber for quick and efficient access - Easy-click door lock joints enable user to quickly configure doors to fit weighing work flows The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg, is crafted for precision and ease of use, equipped with advanced features tailored to meet the demands of diverse laboratory environments. With dual capacities of 42 g and 210 g, and an impressive readability of 0.01 mg in the lower range and 0.1 mg in the higher, it ensures exceptional precision for critical measurements. Its splash and dust-proof membrane keypad, along with a robust die-cast aluminum base, provides durability and stability. The built-in internal calibration weight enables automatic self-calibration, ensuring consistent accuracy. A large 0.7-inch LCD display and straightforward six-button keypad interface make the balance easy to read and operate, while the front-mounted spirit level bubble helps users quickly achieve accurate leveling. With an anti-static breeze break and ABS housing, along with stainless steel components such as the pan, spill ring, and base floor, the Gemini GR-202 is designed for easy maintenance and long-lasting performance. The compact footprint and collapsible doors save valuable bench space and reduce accidental mishaps, while easy-click door lock joints allow users to adjust the chamber for convenient access and workflow efficiency. The Full Digital Calibration function supports both internal and external calibration, allowing quick, reliable calibration on site for peak performance. For data management, this model includes a memory function to store up to 200 weighing data records and complies with GLP/GMP/GCP/ISO output standards. Connectivity options include bi-directional RS-232C, and with the underhook for below-weighing applications, the Gemini GR-202 adapts to various tasks with precision. Supported by a 5-year warranty, this balance ensures reliable performance for your lab’s most critical measurements. INCLUDED: The A&D Weighing Gemini GR-202 Semi-Micro Dual Range Analytical Balance, 42/210 g, 0.01/0.1 mg includes: - Weighing Pan - Fine Range Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Corepoint Scientific NSWDUF211JWJ-0 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 1 (more)15V Temperature Setpoint Range -50°C to -86°C Capacity 21 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF211JWJ-0 -50°C to -86°C Upright Ultra Low Temperature Laboratory Freezer, 115V, is engineered for demanding cold storage applications, providing safe storage for samples and reagents. This 21 cu. ft. capacity freezer features high efficiency and low noise operation, utilizing two compressors with a 300 BTUh reserve capacity. The interior is equipped with a triple gasket seal, vacuum relief port, five double-walled insulated inner doors, and four heavy-duty stainless steel adjustable shelves. The microprocessor controller offers touch pad keys, a large LED temperature readout, and both audible and visual alarms with a silence key. Programmable high and low temperature alarm set points and an access code limit access to set points and controller configuration. Additional features include automatic voltage boost for low line voltages, alarm contacts, a 4-20mA signal for central alarm system connection, RS-232 serial output, and battery backup during power outages. The temperature range is -50°C to -86°C. The exterior includes a cam action handle with a key lock and door switch for alarms, four heavy-duty swivel casters with locks, and CFC-free refrigerant. Made in the USA, this freezer is ideal for laboratories requiring ultra-low temperature storage. INCLUDED: The Corepoint Scientific NSWDUF211JWJ-0 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 115V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Corepoint Scientific NSRI231WSW-0H Single Solid Door Temperature and Humidity Stability Chamber Temp (more)erature Setpoint Range 4°C to 70°C Humidity Setpoint Range 15 to 95% RH Capacity 23 cu. ft. (651.3L) Features - Engineered for stringent scientific and laboratory research requirements - Advanced design in cabinet construction, refrigeration, temperature control, and monitoring - One right-hinged, self-closing solid door and three 304 stainless steel sliding tray shelves - PID controller with LCD display, programmable ramp and soak functions, and USB data port - Foamed-in-place polyurethane foam insulation and white powder-coated steel exterior - Top-mounted variable speed compressor and hydrocarbon natural refrigerant (R600a) - Ultrasonic humidification and multi-element proportional electric heating - Heavy-duty door handle, magnetic door gasket, keyed door lock, and probe access port The Corepoint Scientific NSRI231WSW-0H Single Solid Door Temperature and Humidity Stability Chamber is engineered to meet the stringent requirements of scientific and laboratory research. This chamber features advanced design elements in cabinet construction, refrigeration, temperature control, and monitoring, ensuring energy-efficient, safe, and reliable performance for optimal storage environments. It includes one right-hinged, self-closing solid door and three 304 stainless steel sliding tray shelves. The PID controller with an LCD display offers programmable ramp and soak functions, process phase graphic animations, a USB data port, RS-485 communication (MODBUS-RTU), real-time clock, battery backup, and event logs. The chamber provides precise temperature control (4°C to 70°C) with ± 0.1°C accuracy and uniformity of ± 1°C. Humidity control ranges from 15 to 95% RH with ± 0.1%RH accuracy and stability of ± 3% RH. Additional features include foamed-in-place polyurethane foam insulation, a white powder-coated steel exterior, a 304 stainless steel interior, plenum air distribution, a floor drain, top-mounted variable speed compressor, hydrocarbon natural refrigerant (R600a), ultrasonic humidification, multi-element proportional electric heating, and shielded interior LED lighting. The chamber also includes a heavy-duty door handle, magnetic door gasket, keyed door lock, and a probe access port. INCLUDED: The Corepoint Scientific NSRI231WSW-0H Single Solid Door Temperature and Humidity Stability Chamber includes: - Key for Door Lock - 3 x Sliding Shelves - Power Cord - Operator's Manual - 18 Month Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Diameter: 75 mm Suction nozzle diameter: 380 mm Extraction arm length: 1550 mm Including connector

XA 110.5Y.F Analytical Balances for Filters XA 5Y.F Analytical Balances are used to determine absorp (more)tion in the process of differential filter mass measurement with the highest readability [d] of 0.01 mg. For this reason, in addition to the regular weighing pan, XA 5Y.F balances have a weighing pan for filters. The devices are also equipped with a manually opened weighing chamber and use a semi-automatic levelling system. Semi-automatic Leveling System Semi-automatic levelling, the so-called LevelSENSING System, has a great advantage over the manual levelling, in the case of the former one the user is prompted in which direction to level the balance. This shortens the very process. 5Y PLUS Balances (Smart Min Weight, Integrated Ionizer, Two-Point Adjustment and Much More) – You Have It Already. With ELLIPSIS Balances, You Have the Same and More: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.