Labconco 342491001 4' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixture, and Vacu-Pass Portal, 115V, 60Hz

Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Lig (more)ht, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control The SIEVA-3 Filtration Cen (more)trifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Corepoint Scientific CRTPR101WWW-0 20C to 25C Solid Door Upright Controlled Room Temperature (CRT) C (more)abinet Temperature Setpoint Range 20°C to 25°C Capacity 10.5 cu. ft. (297.3L) Defrost Method Cycle Features - Microprocessor temperature controller with digital display for precise temperature management - Interior fan-driven, forced-draft air circulation system for excellent temperature uniformity and recovery - Audible and visual high/low temperature alarms with remote alarm contacts - Two probes (one in air and one in sample bottle) for enhanced monitoring - Six adjustable shelves with guard rails and a bottom footed shelf for air circulation - Right-hinged solid swing door with keyed lock and magnetic gasket for security - Temperature monitoring device (TMD) compliant with CDC guidelines, with 3-year calibration certificate and min/max memory - Environmentally friendly HFC-free refrigerant (R600a) and high-density urethane foam insulation The Corepoint Scientific CRTPR101WWW-0 20°C to 25°C Solid Door Upright Controlled Room Temperature (CRT) Cabinet offers precise temperature control for optimal storage of sensitive products. With a 10.5 cu. ft. capacity, this cabinet features a microprocessor temperature controller and digital display, ensuring accurate temperature management within the adjustable range of 20°C to 25°C. An interior fan-driven, forced-draft air circulation system ensures excellent temperature uniformity and quick recovery after door openings. The cabinet includes audible and visual high/low temperature alarms, remote alarm contacts, and two probes (one in air and one in a sample bottle) for enhanced monitoring. It also features a temperature monitoring device (TMD) compliant with current CDC guidelines, with a 3-year calibration certificate, buffered probe, min/max memory, and visual and audible temp alarms. The unit has six adjustable shelves with guard rails, a bottom footed shelf for air circulation, and a back wall evaporator cover. Security features include a right-hinged solid swing door with a keyed lock and magnetic gasket. Additional features include an LED interior light, probe access port, leveling legs, powder-coated exterior, high-density urethane foam insulation, HFC-free refrigerant (R600a), and a vaccine toolkit with temperature logs. This cabinet ensures reliable and efficient storage, preventing unnecessary expenses and product recalls. INCLUDED: The Corepoint Scientific CRTPR101WWW-0 20C to 25C Solid Door Upright Controlled Room Temperature (CRT) Cabinet includes: - Key for Door Lock - 6 x Adjustable Shelves - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Global Process Concept Sarl Temperature Controller.

Yamato MG-600H-115V Magnetic Hotplate Stirrer, 115V Stirring Rate 300 to 1500rpm Max. Hot plate Tem (more)perature 250°C Stirring Capacity 100 to 2000ml x 6pcs. Features - Rotation and heating can be adjusted individually - Equipped with circuit protector - Chemical resistant ceramic coating hot plate Six point controllable magnetic stirrer with chemical resistant ceramic coating hot plate. Rotation and heating can be adjusted individually. Equipped with circuit protector. Stirring rate 300~1500rpm. Stirring capacity 100~2000 ml x 6 pcs. and maximum hot plate temp of 250°C. INCLUDED: The Yamato MG-600H-115V Magnetic Hotplate Stirrer, 115V includes: - Stirrer bar 30mm 6 pcs. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This listing is for a Adam Equipment Nimbus BalanceInnovative design enables a compact footprint, so (more) it occupies minimal space but retains a high level of performance. The Nimbus base is formed from a single piece of extruded aluminum, a material that provides superior temperature regulation. The single-piece construction offers greater stability, producing highly repeatable results. The weighing sensor in the Nimbus is crafted from a single block, and contains fewer parts than a traditional force motor balance. This optimized internal mechanism is fabricated using hardened materials, helping the Nimbus tolerate rigorous laboratory use. Efficiency in the mechanics, plus improved processing power of the electronics, leads to excellent performance.Capacity - 120gReadability - 0.0001gRepeatability - 0.0001gLinearity - 0.0003gMin Weight USP - 0.01gPan size - 90mm øWeighing Units - ct, custom unit, dwt, g, GN, mg, N, oz, oztStabilisation Time - 4Interface - RS-232/USBCalibration - Internal automatic calibrationDisplay - Backlit LCD with 20mm high digitsOperating Temperature - 15° to 35°C / 59° to 95°F

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW