Dionex UltiMate 3000 HPLC System - VWD, RSLCNANO, Autosampler

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Packard Multiprobe ll EX Robotic Liquid Handling System This was removed from a university lab where (more) it was surplus to requirements. The system powers up and operates but a fault was discovered during testing. The report " Encoder not detected on four tip arm Z1 motor" is displayed and halts the self-test. It is in good cosmetic condition with marks from use but is sold for spares/repairs. Included with it are; Dell Optiplex 745 PC running on Windows XL with WinPrep software for handling systemDell 17" monitorDell windows keyboardA collection of deck holding plates and reservoirs for handling systemTwo original user manualsPower and connecting cables

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university (more) lab where it was surplus to requirements. All units are in good used cosmetic condition but they do have various signs of general use. The system consists of: 1 x Beckman Coulter Biomek Fxp CAT No A31842.The unit powers up and both lights illuminate Green. It was not tested any further.The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included. 1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.It comes with:2 x Stacker 10 hotels.2 x FX Stacker 10 hotels.1 x Stacker Carousel Pendant.The mounting plate to connect it to the Fxp is included.It also comes with a spare Microscan, operational condition is unknown. 1 x Lenovo PC with monitor, mouse & keyboard.It has the Biomek Version 3.3 software installed. 1 x Jun-Air 1795001 Compressor. The system also includes quite a few plates and consumables and various connection cables.

Agilent 7890A Gas Chromatograph Lab This unit was removed from a university lab where it was surplus (more) to requirements. The lab confirmed it was in working order prior to removal. It is in good cosmetic condition and powers up. When the unit is powered on it successfully carries out a self-check sequence. Systems consists of: 1 x Agilent 7693 AutosamplerP/N: G4514AS/N: CN10060033 1 x Agilent 7693 Injector towerP/N: G4513AS/N: CN10120089

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 50 g) Wooden box Number of piec (more)es in the set: 8 weights 1 g i 2 g – solid masses without adjusting chamber

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Labconco FilterMate Portable Exhauster, HEPA Filter and thimble connection included Compact, cor (more)rosion-resistant housing of glacier white and light gray powder-coated steel with rubber feet Variable-speed, non-sparking motorized impeller Oversized HEPA filter, efficient impeller and perforated exhaust cover work together to provide lower system exhaust velocity and noise pressure levels Inherently safe design via negative pressure plenum that surrounds positive pressure impeller so that if leak occurs, unfiltered air is captured and refiltered Front-mounted rocker switch to control power to blower Rear-mounted, auxiliary electrical outlet that may be connected to airflow monitor or other user-supplied accessories Only one FilterMate is required for all 2 ft., 3 ft. and 4 ft. wide enclosures, Multiple FilterMates may be used for 5 ft., 6 ft. and 8 ft. wide enclosures IEC three-wire electrical cord 1.9m (6.5 ft.) with plug included (115V models) Models with HEPA filters have a true bag-in/bag-out filter disposal system for safely removing and replacing filter without detaching hose HEPA filter may be easily accessed by removing exhaust cover for field leak testing by certified technician Thimble connection (included with some models) provides added safety by connecting FilterMate to existing house exhaust system INCLUDED: The Labconco 3970002 FilterMate Portable Exhauster, HEPA Filter and thimble connection included, 115V, 60Hz includes: - HEPA Filter - 8 feet of 5" ID Gray Flexible Hose - Two Clamps and a 5" OD Upper Transition Adaptor - XPert Balance Enclosure - Protector XVS Ventilation Station - Thimble Connection - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Eurostar 100 Control P4 Overhead Stirrer Speed Range 10 - 300 RPM Viscosity Max. 100,000 mPas  (more)Stirring Quantity Max. 100 l Features - Reverse function - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Quiet operation - Error code Display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery The extremely powerful laboratory stirrer EUROSTAR 100 control P4 with a removable wireless controller and a digital TFT display is especially suitable for highly viscous applications and provides a torque of up to 320 Ncm. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/10 - 300 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. Furthermore, an integrated torque trend display is provided for the measurement of viscosity changes and its electronic safety circuit ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.INCLUDED: The IKA Eurostar 100 Control P4 Overhead Stirrer includes: - EUROSTAR 100 control P4 - H 67.60 Temperature sensor, stainless steel - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Screw driver - Protective cover for WiCo contact - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 100 Control P4 Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)100 lMotor rating input174 WMotor rating output142 WMotor principleBrushless DCSpeed displayTFTSpeed range10 - 300 rpmReversible direction of rotationyesIntermittent operationyesViscosity max.100000 mPasOutput max. at stirring shaft 100 WPermissible ON time 100 %Torque max. at stirring shaft 320 NcmSpeed controlsteplessSetting accuracy speed1 ±rpmDeviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 10 mmFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmTorque displayyesNominal torque3.20 NmTorque measurementtrendDeviation of torque measurement I30 ±NcmTimeryesTimer displayTFTTime setting range1 - 6000 minTemperature measuring range-10 - +350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)86 x 352 x 230 mmWeight5.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 40RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input150 W DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote