Climet CI-95+ Microbial - Air Sampler Lab

This listing is for a Lion Mark II Formaldemeter.The unit is in full working condition and is ready  (more)for immidate realese.The Lion Formaldemeter MK11 is a specialized instrument designed for measuring formaldehyde concentrations in various environments. This meter is essential for professionals in fields such as environmental monitoring, industrial hygiene, and health and safety compliance. Here are some key features and considerations regarding its use:Key Features:Service and Calibration: The Lion Formaldemeter MK11 can be serviced and calibrated at any general service facility that is equipped to handle PPM Formaldemeters and Glutaraldemeters. This ensures reliable performance and accurate readings over time.Phenol Filters: The device includes the option to fit phenol filters over the sampling nozzle. These filters are crucial for preventing saturation, thereby ensuring accurate and reliable readings. It is recommended to replace these filters approximately every 10 samples to maintain optimal performance.Cross-Sensitivity: Users should be aware that the Formaldemeter may exhibit cross-sensitivity to other volatile aldehydes and alcohols. This characteristic can potentially affect the accuracy of measurements, so it is important to consider the presence of these substances in the environment being tested.Calibration Warning: For accurate calibration, it is critical to avoid using interference gases. Calibration should always be performed under controlled conditions to ensure the integrity of the measurements.Applications:The Lion Formaldemeter MK11 is ideal for a variety of applications, including:Environmental monitoring in workplaces and laboratoriesAssessing formaldehyde levels in building materials and indoor air qualityCompliance testing for health and safety regulations

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. As seen, there is damage sustained to the display screen, however, it does not impact its functionality. The Unit comes with a case, 18V Charger and a Remote

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. 7.5" L x 5.5" W x 6"

This Turnkey Instruments OSIRIS Environmental Particle Monitor & Tripod Housing was removed from (more) a university lab where it was surplus to requirements. The item powers on and is in reasonable used cosmetic condition. It has not been tested further at our facility. It comes in a carry case with a power supply, USB cable & other small parts/fittings. There is a software disk included. Housing Tripod Height - 135cm

Climet Model CI-95+ Microbial Air Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item does not include a battery pack and charger.

HACH LANGE LT 200 DCO heating block Model: LTG082.01.23002 LT200 Temperature: 37 to 150°C per 1°C Ti (more)me: 0-480 mins Heating: from 20°C to 150°C in 10 minutes Stability: +/-1°C Dimensions HxWxD: 145x250x310 mm Power supply: 220 V - 50/60 Hz - 600 VA Safety: maximum insulation, transparent protective cover locks, audible signal at end of program For 30 Ø13mm tubes Equipment tested at 120°C

Applied Biosystems MDS SCIEX QStar System Software This was removed from a university lab where it w (more)as surplus to requirements. Included are the following: 1x Analyst® QS 1.1 SoftwareP/N 1012847 1x Metabolite ID 1.3 for Analyst® QS 1.1 SoftwareP/N 1012866 1x Analyst QS 1.1 Software Validation CertificateDated 03/12/20041x Metabolite ID 1.3 for Analyst® QS 1.1 Validation CertificateDated 03/12/2004. 2x Copies of License Agreement for Analyst® QS 1.1 Software1x Metabolite ID 1.3 for Analyst® QS 1.1 Software Release Notes

Thermo Scientific Megafuge 16 ventilated centrifuge. Maximum speed 15,200 rpm (25,830 x g). Includes (more) TX-400 rotor, whose maximum speed is 5000 rpm, four buckets and adapters for 14 10 ml tubes. (Adapter ref. 75003681). Nine acceleration ramps and 10 deceleration. Digital screen. Memory for 6 programs. Maintenance free induction motor. Timer 9 h 99 min. and continued. Safety and imbalance controls. Dimensions: 60.5*44*36cm; weight 57 kg. Other adapters not included. Ref: Thermo Scientific Set of 2 15 mL adapters (Cat. No. 75003682) and Set of 2 50 mL adapters (Cat. No. 75003683). The Thermo Megafuge 16 is an easy-to-use benchtop centrifuge with intuitive controls, a digital setup display, and a memory bank of six programs to store your processes. It has a maximum capacity of 1.6 liters, reaches a maximum of 15,200 rpm and a timer of up to 9h59min. It is recommended, among other applications, for cell culture, blood processing, microplates, etc.

Heidolph Multi-Channel Pump Head C8 Features: - Accepts 8 cassettes medium or 4 cassettes large - 4- (more)roller design - Increase your throughput by running up to 12 cassettes small on one single pump drive and pump head system - Separate metering into multiple vessels with different feed rates in a single operation by using different tubing dimensions to adjust flow rate - Save time: tubing change is done in just seconds - Change your cassettes easily, even during operation – there are no restrictions - Cassette adjustments and changes are simple, just click in place - No additional purchase of a pump drive needed: upgrade your single-channel pump drive with just one adaptor for multi-channel use and pick the head/cassette configuration that matches your application needs These pump drives can be configured for multi-channel use: - Hei-FLOW Core 120 - Hei-FLOW Expert 120 - Hei-FLOW Ultimate 120 INCLUDED: The Heidolph Multi-Channel Pump Head C8 includes: - 3 Year Manufacturer's Warranty