Lion Mark II Formaldemeter

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use. Also included is the following: Nardi Compressor - Dryer 400Installed/Replaced - 23/11/23

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. 7.5" L x 5.5" W x 6"

Climet Model CI-95A Microbial Air Sampler 100 LPM Lab This item was removed from a university where  (more)it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item includes a battery pack and charger.

Climet Model CI-95+ Microbial Air Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item does not include a battery pack and charger.

Climet Model CI-95+ Microbial Air Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item does not include a battery pack and charger.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor This was removed from a uni (more)versity lab where it was surplus to requirements. It has been tested by a service engineer and is in full working order. It is in very good cosmetic condition with only minor marks from use. A brand new gas strut was fitted by the engineer. Rotor - Precision SO-1XCat no. 51231203 4 x Swinging buckets - SO-1XCat no. 51231221SN - 1302/01 4 x Adaptors to fit 15ml tubesCat no. 51231208

Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Siz (more)es (W x H) 18 x 24 cm Maximum Power Settings 500 V, 60 mA, 20 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 24 cm - Rugged injection molded construction is durable and assembles easily - Run two gels with the addition of a divider plate - Built-in casting stand seals leak free - Choose from a wide variety of accessories - Plates, clamps, spacers, and combs are interchangeable with the SE600 Series The Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit is a durable and economical choice, specifically designed for educational labs with multiple users. Constructed with rugged injection-molded materials, this compact unit offers long-lasting performance and easy assembly, making it ideal for consistent use in busy lab environments. Accommodating glass plates up to 18 x 24 cm, the SE410 provides ample space for precise protein analysis, with the option to run two gels simultaneously using an additional divider plate. The SE410's built-in casting stand ensures a leak-free seal, streamlining the setup process and enhancing ease of use. For added versatility, its plates, clamps, spacers, and combs are interchangeable with the SE600 Series, allowing labs to expand and tailor their electrophoresis setups as needed. Operating smoothly within standard lab conditions, this unit handles temperatures up to 45°C and humidity up to 80%, with power settings reaching 500 V, 60 mA, and 20 W—delivering reliable performance across a range of applications. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 24 cm, 2 pcs - Clamp Assemblies, 8 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Spacer-Mate Alignment Template - Wonder Wedge-Plate Separation Tool - Gel Seal - Comb, 15-well, 1.5 mm thick - Spacers, 1.5 mm thick, 2 cm wide, 2 pcs INCLUDED: The Hoefer SE410 Tall Air-Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 24 cm, 2 pcs - Clamp Assemblies, 8 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Wonder Wedge-Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 500 g), wooden box Number of p (more)ieces in the set: 24 Weights 1 g i 2 g – solid masses without adjusting chamber

Motic B1-252ASC LED Binocular Compound Microscope Magnification Range 4x to 100x Optical System Fini (more)te, 160mm Illumination 3W LED Features - For basic work in biology and medicine - View sections, smears, and other transparent samples - Binocular head - Achromatic Super Contrast - 3W LED Illumination - Robust and sturdy base - Phase contrast, Dark field, and Polarization accessories optionally available - Coarse focusing system with tension adjustment - Switching power supply for use worldwide (100-240V) Superior in design and in performance, the B1 Series incorporates a wide range of features designed for university and laboratory use. Superb optical clarity and reliable mechanical engineering assures years of top performance. Choose from two grades of objectives: Standard Achromatic lenses deliver excellent clarity and normal flatness of field, while the ASC Achromatic Super Contrast objectives deliver extra contrast to the image. Combined with precision coaxial coarse and fine focusing adjustments, the B1 models are exceptionally high quality microscopes available within a tight budget. The B1 series also comes equipped with a new rack-less stage, which allows the microscope to be used in different current and future tenders. In order to provide enough light to Brightfield, Phase Contrast as well as Darkfield applications, the illumination has been changed to Motic’s powerful true 3W LED keeping the system cool as well as properly illuminated with steady color-temperature. INCLUDED: The Motic B1-252ASC LED Binocular Compound Microscope includes: - Binocular head inclined 45° and 360° rotating - Widefield eyepieces WF10X / 18mm - Quadruple nosepiece - Achromatic Super Contrast Objectives: ASC 4X, 10X, 40X S, 100X S-Oil - Built in low position coaxial Rackless mechanical stage - Focusable 1.25 N.A. Abbe condenser - Iris diaphragm with filter holder - LED illumination 3W with intensity control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Gilson CARROUSEL Pipette Stand The Gilson CARROUSEL Pipette Stand protects up to seven valuable sing (more)le channel or multichannel pipettes from benchtop contamination. Further protection is gained because pipettes hang vertically from the rack, preventing liquids from entering and contaminating the pipette shaft. Made from chemically resistant polypropylene and polycarbonate, the CARROUSEL stand’s heavy base provides added stability. The rotating head of the CARROUSEL stand provides quick access to pipettes while keeping your benchtop decluttered. Its space-saving design frees your bench space for more important tasks at hand. INCLUDED: The Gilson CARROUSEL Pipette Stand includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty