Climet CI-95+ Microbial Air Sampler Lab

This listing is for a Lion Mark II Formaldemeter.The unit is in full working condition and is ready  (more)for immediate release.The Lion Formaldemeter MK11 is a specialized instrument designed for measuring formaldehyde concentrations in various environments. This meter is essential for professionals in fields such as environmental monitoring, industrial hygiene, and health and safety compliance. Here are some key features and considerations regarding its use:Key Features:Service and Calibration: The Lion Formaldemeter MK11 can be serviced and calibrated at any general service facility that is equipped to handle PPM Formaldemeters and Glutaraldemeters. This ensures reliable performance and accurate readings over time.Phenol Filters: The device includes the option to fit phenol filters over the sampling nozzle. These filters are crucial for preventing saturation, thereby ensuring accurate and reliable readings. It is recommended to replace these filters approximately every 10 samples to maintain optimal performance.Cross-Sensitivity: Users should be aware that the Formaldemeter may exhibit cross-sensitivity to other volatile aldehydes and alcohols. This characteristic can potentially affect the accuracy of measurements, so it is important to consider the presence of these substances in the environment being tested.Calibration Warning: For accurate calibration, it is critical to avoid using interference gases. Calibration should always be performed under controlled conditions to ensure the integrity of the measurements.Applications:The Lion Formaldemeter MK11 is ideal for a variety of applications, including:Environmental monitoring in workplaces and laboratoriesAssessing formaldehyde levels in building materials and indoor air qualityCompliance testing for health and safety regulations

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. As seen, there is damage sustained to the display screen, however, it does not impact its functionality. The Unit comes with a case, 18V Charger and a Remote

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. 7.5" L x 5.5" W x 6"

This Turnkey Instruments OSIRIS Environmental Particle Monitor & Tripod Housing was removed from (more) a university lab where it was surplus to requirements. The item powers on and is in reasonable used cosmetic condition. It has not been tested further at our facility. It comes in a carry case with a power supply, USB cable & other small parts/fittings. There is a software disk included. Housing Tripod Height - 135cm Last calibration date - 18/01/2022

Climet Model CI-95A Microbial Air Sampler 100 LPM Lab This item was removed from a university where  (more)it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item includes a battery pack and charger.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller This was removed from a unive (more)rsity lab where it was surplus to requirements. Included are; PFEIFFER Turbomolecular Vacuum Pump:Model TMH 262-005DN 100 ISO -K, 3P The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up. PFEIFFER Controller:Model TC100Mod no. PM C01 692A The unit is in good cosmetic condition

Motic AE21 Series Trinocular Inverted Microscope with 2x Objectives This was removed from a working  (more)lab where it was surplus to requirements. The unit powers up and is in good working order. The LED lamp brightness indicator does not work, but the brightness is still adjustable. It is in good cosmetic condition with minor marks. 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 2 x Objectives: 1x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.3 1x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2 Includes: -Dust cover-Box of eyepiece covers-Instruction manual

Thermo Scientific 75003667 BIOLiner Swing-Bucket Rotor Thermo Scientific 75003667 BIOLiner Swing-Bu (more)cket Rotor can spin samples up to 3,500 rpm. For use with Thermo Scientific Sorvall ST40/40R, SL40/40R, Sorvall Legend XT/XTR, Heraeus Megafuge 40, Heraeus Multifuge X3/X3R, Heraeus Megafuge 40/40R Centrifuge Series Thermo Scientific BIOLiner is never used, new in box. Rotor only. INCLUDED: The Thermo Scientific 75003667 BIOLiner Swing-Bucket Rotor includes: - Full 1 Year Parts and Labor Warranty Thermo Scientific 75003667 BIOLiner Swing-Bucket Rotor SpecificationsCapacity4 x 750mLMax Speed3,500 RPMMax RCF2,739 x gRadius10.5cmAngle90CK Factor13307Max Tube Length124mm

Ohaus ISWV02HDG Waving Incubating Shaker The Ohaus ISWV02HDG Incubating Waving Shaker combines the u (more)nique vertical and horizontal "wave" motion with general purpose incubation in one compact bench top unit. The ISWV02HDG is designed to incubate samples from 5° above ambient to 65° C to provide accurate and repeatable results. Waving shakers offer a smooth, low-foaming three-dimensional "wave" motion. The ISWV02HDG features LED displays with touchpad controls. Both models include safety features that protect both the user and samples. Equipped with LED displays and touchpad controls for temperature, speed/tilt angle and time. Timer will display elapsed time or when programmed to a set time, will turn off when time reaches zero. Microprocessor control provides electronic tilt angle adjustment, allowing easy adjustment in 1° increments for tilt and 1 rpm for speed while unit is running. PID controller for precise temp. control. Units slowly increase speed to desired setpoint to avoid splashing, and feature overload protection. Audible and visual signals will activate when system detects an obstruction or overload of the tray.INCLUDED: The Ohaus ISWV02HDG Waving Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISWV02HDG Waving Incubating Shaker SpecificationsTemperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range1 to 30 rpmSpeed Accuracy± 1 rpmTilt Angle0 to 20°Timer1 second to 160 hoursMaximum Weight Capacity5 lbs (2.3 kg)Tray MaterialAluminumTray Dimensions (L x W)9.25 x 7.25" (23.5 x 18.4 cm)Interior Dimensions (L x W x H)10.75 x 7.75 x 3.4" (27.3 x 19.7 x 8.6 cm)Overall Dimensions (L x W x H)17 x 11 x 10.5" (43.2 x 27.9 x 26.7 cm)Ship Weight22 lbs (10 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(7) { background-color: #fffacd; }

Ohaus ISHD23CDG - Incubating and Cooling Heavy Duty Orbital Shaker Discover a revolution in shaking  (more)and incubation with the Ohaus ISHD23CDG - Incubating and Cooling Heavy Duty Orbital Shaker. Expertly crafted with a 25mm orbital motion and a highly durable design, this benchtop model is poised to enhance your laboratory's efficiency and precision.Key Specifications: - Motion: Features an orbital motion of 25mm, providing thorough and gentle mixing of lab samples. - Capacity: Exceptionally robust, supporting up to 50 lb (22.7kg) @ 125 rpm, and 10 lb (4.53kg) @ 500 rpm. - Temperature Range: Uncompromising in its ability to adapt, with a range of 15°C below ambient to 65°C. - Temperature Calibration: For ensuring accurate and reliable temperature readings. - Overload Protection: Prevents equipment damage and enhances user safety. Unique Features: - Opti-Flow Forced Ventilation System: Our exclusive system utilizes twin induction or a single large fan. By deflecting air around, not directly onto samples, a circular flow of air is created to ensure temperature uniformity. - Accu-Drive Shaking System: Delivering repeatable results, our exclusive system ensures speed accuracy, while the Triple Eccentric Drive provides consistent shaking motion throughout the entire speed range. - Spacious Chambers: The chambers for the ISHD23HDG and ISHD23CDG units are sufficiently large to accommodate 2 x 6L Erlenmeyer flasks, with optional clamps and platform. Incorporate the Ohaus ISHD23CDG - Incubating and Cooling Heavy Duty Orbital Shaker into your lab today, and witness first-hand the space-saving convenience and outstanding performance they deliver. This benchtop unit promises temperature uniformity and a diverse range of shaking and incubating applications, making it an invaluable asset for your research needs.INCLUDED: The Ohaus ISHD23CDG - Incubating and Cooling Heavy Duty Orbital Shaker includes: - Power Cord - 2 Year Manufacturer's Warranty