MLDesigner

Zeiss Axio Vert.A1 FL Inverted Microscope This system was removed from a university lab where it was (more) surplus to requirements. The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted. The instrument is configured as follows: - 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000) - Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination - Reflector modules: DAPI, FITC, TRITC, empty - 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000) - Position 1: empty - Position 2: 424228-9060 0.05T Neutral density filter 0.05 - Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55 - Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55 - Position 5: empty - 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000) - 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000) - 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23 - 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000) - 1 x Camera adapter 60N-C 2/3" 0.5x (426112) - 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00) - 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000) - Object guide M, 130x85mm, for Axio Vert (432333-9040-000) - 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

Leica DMIL Inverted Microscope Type 090-135.001 with 4 x Objectives This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Included are; 2 x Eyepieces:Leica 10X/18 (527000)Leica 10X/18 M (527001) 4 x ObjectivesLeica ∞/1.1 HI PLAN I 40x/0.50 PH 2 (506273)Leica ∞/0-2 HI PLAN I 20x/0.30 PH 1 (506272)Leica ∞/-/ HI PLAN I 10x/0.22 PH 1 (506271)Leica ∞/- HI PLAN 4x/0.10 (506226) Stage - 11521248BZ: 00

IKA R 3003.2 Spiral stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel Fe (more)atures - Generates axial flow for efficient medium conveyance from the bottom upwards - Ideal for homogeneous mixing and heat exchange with medium to high viscosity media - Suitable for low to medium speed operations for precise control - Constructed from AISI 316L / 1.4571 stainless steel for superior durability and corrosion resistance - Operates within an ambient temperature range of 5 - 40 °C, versatile for different laboratory conditions This advanced stirrer is crafted to create an axial flow, moving the medium efficiently from the bottom upwards, perfect for mixing and facilitating heat exchange in medium to high viscosity media. Featuring a large 150 mm diameter and an 800 mm shaft, it is constructed from the robust AISI 316L / 1.4571 stainless steel, ensuring durability and resistance to corrosion. Designed to operate at low to medium speeds, it offers unparalleled control for a wide array of laboratory applications. With a height of 244 mm and weighing 1.045 kg, it’s optimized for stability and performance within a permissible ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3003.2 Spiral stirrer includes: - IKA R 3003.2 Spiral stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The EM series mantle is made with extreme care and is hand sewn to assure its reliability, quality a (more)nd safety. Maximum heat transfer to the sample is achieved by having excellent insulation around the cartridge and good flask coverage. Designed with flexibility and ease of use in mind, the EM series heating mantle is a reliable workhorse for your heating applications in the laboratory. All EM Electromantles have a built-in energy regulator with indicator lamps for power and heater operation. All mantles have support rod clamps as an integral feature and incorporate a grounded earth screen and double fuses for added safety. Flask capacity: 500 ml Material: Polypropylene outer case Max element temperature: 450°C Dimensions (DxWxH): 310 x 238 x 145 mm Weight: 1.25 kg

The Memmert BE 400 is ideally suited for all applications with temperatures up to 70°C in research,  (more)medicine, pharmacy and food analysis, as well as food chemistry. It is especially useful for incubating live cultures at 37°C. The incubator is equipped with manually regulated air flow. Temperature range: Ambient temperature +5°C to 70°C Capacity: 40 L Internal glass door for observation Convection: natural Dimensions (WxDxH): 555 x 515 x 675 mm Internal dimensions (WxDxH): 380 x 285 x 385 mm Weight: 54 kg

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. With the E2R Formulations module, you can: create formulations; manage formulations; create simple reports of the carried out formulations; support E2R System databases such as “Products” and “Operators”; exchange data with external programs via the Data Synchronisation Module; change the application’s skins. And with the E2R Formulations module compatible with PUE HY10, PUE 7.1 and PUE 5 terminals, you can: preview the carried out measurements, carry out formulations based on production orders, determine the amount of each formulation ingredient, determine the tolerance of the weighed ingredient, dose the formulation up to a specified mass, integrate with the Data Synchronisation Module, carry out production orders, define the permission levels for specific operators, carry out production orders with batches, weigh remains of each batch portion, perform multiple weighing procedures of one ingredient, weigh each ingredient of the formulation on a different scale or platform, enter the batch number after each weighing, carry out formulation with the dosing function, carry out production orders on several scales, repeatedly carry out formulations, manage the “Formulations” and “Orders” databases, carry out production orders divided into phases, hold up formulations and production orders performance, operate receipt and label printers, label directly from the PUE 5 terminal.