Beckman Coulter Biomek FXP Laboratory Automation Workstation Lab

3 VARIAN / BRUKER CP-8400 autosamplers / chromatograph changers for parts For GC 3800 chromatograph

Chemagen Chemagic Separation Module I with Software & Accessories This was removed from a unive (more)rsity lab where it was surplus to requirements. Included in the system are; 1 x Chemagic Magnetic Separation Module I10 x Tube Racks :-7 hold 12 x 50ml tubes2 Hold 12 x 15ml tubes1 holds 12 x 0.5ml tubes 1 x Chemagen BiopolymerVulkan TechnicOrder no. 200 03 014The unit powers on but not tested further. 1 x Compaq PCModel - Presario S0000Chemagen/Chemagic Software MSM (Release 5.1.0.6) Installed 1 x DGM MonitorModel - L-1731W 1 x Compaq Keyboard 1 x IBM Mouse All PC equipment powers up and seems to be in full working order. Boxed Accessories:-178 x Genetix Lids (opened)100 x Sealed 96 well 2.2ml storage plates6 x Sealed Nunclon Surface plates10 x Rubber plates5 x 384 well plates (S300RXFL)9 x 96 well 0.1ml slots8 x 100mm Tissue Culture Dishes11 x Chemagen Tubes (PK-400500-036-080403)18 x Microcon YM-100 Regenerated Cellulose38 x 2ml vials17 Packs of MicroAmp Optical Caps (8 caps per strip, 12 strips per pack)25 x Thermo Scientific 0.2ml Skirtled 96 well PCR Plates57 x fisherbrand Dispenser Tips 12.5mlPromega SV96 Total RNA Isolation System2 x Denletstor Metal racks size 38.5 x 15.5cm, 160 squares 1.5 x 15cm each2 x Wash Buffer 6 Bottles (both full) Volume unknown.Promega Vac-Man Laboratory Vacuum Manifold

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. The unit appears to pretty much fully work. We have homed the axis and run a basic set of commands with it. We have a video of this working. The Tiploader appears to be faulty as it is not accepting commands from the PC. We have verified that the cable/air and PC are communicating with the Tiploader, by connecting a known working unit to the PC. The known working unit operated fine which proved the included Tiploader to be faulty. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31841Unit dimensions - W77 L92 H82cm 1 x IBM ThinkCentre PCMT-M 8143-34UBiomek Software Version 3.3 installed. 1 x IBM ThinkVision MonitorType - 9417-AB1 1 x Jun-Air CompressorModel 6 The item powers on with the compressor running.Cosmetically it is in a good used condition. 1 x Apple Pro Keyboard 1 x Lenovo Mouse Box of Accessories:-Beckman Coulter AccuFrame2 Power AdaptorsVarious cables and parts9 x 96 Well 0.5ml tube plates

This Fluidigm C1 Single Cell Auto Prep System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and passes all self checks. It is in excellent cosmetic condition with minor marks from use. Firmware Version - 2.3-1.2-2.8-2.0Software Version - 2.2.3.1Chips Supported - 178;177;179;186;191

Thermo Scientific Cytomat Hotel This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes:-Manual (English Version)-Manual (German Version)

Tecan Freedom Evo Robotic Liquid Handler with TE-Vacs Vacuum Unit and Accessories This system was re (more)moved from a university lab where it was surplus to requirements. The system is in good cosmetic condition.The liquid handler powered on, but the vacuum unit could not be tested due to the lack of a computer control system. No further testing was carried out. There is no PC or software included in this system. The system comprises the following: - Tecan Freedom Evo Unit - Serial No.: 802001119 - Equipped with two robotic arms: one for plate handling and an eight-head injector arm - Tecan TE-Vacs Vacuum Unit - Serial No.: 802001120 - Aluminium stand (150 x 100 x 82cm), supplied flat-packed Included Accessories: - 1 x Kingston 480GB SSD internal memory storage - 7 x Injector pump piston plungers - 8 x Syringe head tubes - 5 x Syringe head tube sheaths - 8 x Insert LV Diti Standard Cone Genis Ref. 10612518 - 1 x 10-litre square plastic bottle - 1 x 5-litre plastic bottle with 3 suction hose nipples and 1 probe - 2 x 10-litre plastic waste and system liquid bottles - 1 x Diti Waste and Wash Station assembly - 6 x Coils of waste and system liquid hoses - 1 x Tecan Te-Shake plate shaker - 4 x Plate storage stacking towers - 6 x 4-plate holders - 2 x 3-plate holders - 5 x Pipette plate holders - 1 x Thermo Finnpipette FP-Focus MCP12 (30-300 microliters) - 4 x Thermo Finnpipette FP-Focus (0.5-5ml)

This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition an (more)d is ready for immediate release. The Jenway 3540 is a combined pH and conductivity meter designed for use in laboratories where both parameters need to be measured. It offers a space-saving and flexible approach to measuring pH and conductivity. Key Features Simultaneous display of pH and conductivity: Two independent channels prevent interference between probes. Additional modes: Resistivity, salinity, TDS, and mV measurements are available. Data logger: Autosave and print options with storage of up to 500 readings (250 for each mode). Probes sold separately: Glass combination pH electrode, glass conductivity probe (K=1), and ATC probe are available. Specifications Ranges: Conductivity (0.01µS/cm to 1.999S/cm), pH (2 to 20.000), temperature (10.0 to 105.0°C or 14 to 221°F), and salinity (0 to 99.9ppm). Input impedance: Greater than 1012 ohms. Temperature compensation: Manual or automatic, with a range of 0 to 100°C. Dimensions: 210 x 250 x 55 mm (L x W x H).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

General purpose shaker with microprocessor control, ideal for basic mixing applications, staining te (more)chniques, staining and bleaching. Variable speed control provides a consistent, uniform shaking action. The speed is adjustable via a knob with 1 to 10 rotary knobs and the ramping function slowly increases the speed to the set point for added safety. Suitable for continuous use To be used at 0 to +40 °C (maximum 80% relative humidity, non-condensing), in an incubator, CO₂ incubator or cold store. Speed: 40 – 300 rpm Shaking motion: Circular motion Amplitude: 15 mm Platform (WxD): 222 x 299 mm Maximum load: 3.6 kg Dimensions (W×D×H): 280 x 430 x 102 mm Weight: 10 kg

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

Ohaus i-DF33P5000B1L Defender 3000 Floor Scale, 5000 lb., 1 lb. Maximum Capacity 5000 lb. (2,500 kg) (more) Readability 1 lb. (0.5 kg) Platform Size 4 x 4 ft. (1,219 x 1,219 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Standard RS232 and optional USB Device or Ethernet - ABS plastic or 304 stainless steel indicator, 5 mm/0.196 in. fixed top plate, black painted steel treaded platform, IP65 stainless steel junction box with side access, alloy steel load cells, two carbon steel eye bolts, painted steel ramp available - Four load cell mounted feet with self-swiveling ball-in-cup design, painted and stainless steel floor stands (available as accessories) The Ohaus Defender 3000 Floor Scales meet dry weighing needs in industrial and commercial use. Their high-quality construction is designed to minimize flexing under heavy loads for years of dependable performance. The indicator features a bright display that can change color when in check mode. Scale also includes counting and totalization modes. Stainless steel bases include IP68 loadcells for wet areas. Ramps and mounting plates are available. INCLUDED: The Ohaus i-DF33P5000B1L Defender 3000 Floor Scale, 5000 lb., 1 lb. includes: - 2 x Eyebolts - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty