Test and measurement equipment

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

The ZOOM Dual Power is a microprocessor-controlled programmable power supply capable of running both (more) high voltage-low current and high current-low voltage applications concurrently. The high voltage-low current section is ideal for sample fractionation, IPG strips, IEF, and DNA sequencing applications. The low voltage-high current section is for SDS-PAGE, native PAGE, second-dimension SDS-PAGE, DNA-RNA electrophoresis, and blotting applications. Four sets of output jacks on each side of the unit allow for multiple apparatus to run simultaneously, offering greater workflow efficiency and higher sample throughput. Some of the important features of the ZOOM Dual Power unit include: High voltage-low current and low voltage-high current sides can be used independently and concurrently Multiple output jacks allow for the simultaneous running of up to four electrophoresis apparatus on each side of the unit Memory stores up to 30 programs (15 programs per side) of up to six steps per program. Step and ramp functions for discrete and gradual changes of electrical parameters No Load detection alarm system can be disabled to power high voltage applications that require very low current Voltage: 1 – 3500 V,  1V increments Current: 0.01 – 10.0 mA, 0.01 mA increments Power: 0.1 –  35W, 0.1 W increments

Power Supply power-phor-N Power Supply for Electrophoresis, 220 – 260 V, 10 – 500 V Output Range Vol (more)tage, 10 – 1000 mA Output Range Current, 200 W max. Output Range Wattage

High voltage power supply with constant voltage, constant current or constant power regulation mode.

Destainer power supply DPS

3,500 V, 400 mA, 200 W operation 9 program memories with 4 programmable independant break parameter (more)s. Vh or mAh integration and dl/dt break function. Can be used for analytical and preparative IEF, PAGE, SDS-PAGE, 2-D techniques, immunoelectrophoresis, DNA sequencing and blotting. 100-132 VAC / 198-264 VAC, 50/60 Hz, 300 W

The PowerPac is the ideal solution for field research, as a power outage backup or if independence o (more)f mains power during weighing is required. It holds sufficient charge to keep your balance or other devices going for up to 20 hours, depending on the model. Recharging is made easy, by simply connecting the PowerPac while the balance is on mains power. The balance is fully functional during recharging. Suitable voor Mettler TE industrial precision scales.

With his modular electronic components the EN SL LC power pack with HV-Output and an integrated HV-t (more)ransformer guarantees a service-friendly power supply. The EN SL LC power pack comes with two high-voltage connections and was designed to provide Haug ionizing system with the required voltage. This power pack works ideally with Haug ionizing products, such as ionizing bars, air gates, ring ionizers etc. Do not place the power pack on a surface generating or radiating heat and avoid installation location exposed to direct sunlight. Dimensions (HxWxD): 170 x 110 x 100 mm Weight: 10 kg

Small footprint, inexpensive, portable mini power supplies for use with small or mini horizontal and (more) vertical electrophoresis apparatus. Output voltage: ≤400 V Output power: ≤50 W Output current: 250 mA at 200V, 125 mA at 400V 3 parallel outputs (4 mm sockets) 1 V or 1 mA resolution Voltage or current shown on large LED display Overload protection, including protection against accidental short circuit at output terminals

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

Output: 0 to 250 V DC, 2.5 A Dimensions (DxHxB): 294 x 228 x 131 mm

Voltage: 100V Current: 0.1A Power: 10W Single Output Analog Display

Voltage range van 0-300 V. Ampere range van 0-100 mA. Power: 55 VA. Dimensions (H x W x D): 98 x 220 (more) x 180 mm.

The nanoPAC Mini Power supplies are an ultra compact and economic unit ideal for use with DNA (Horiz (more)ontal) and Protein (Vertical) electrophoresis systems. With enhanced features, such as a maximum constant voltage up to 300 and maximum constant current output of 400mA. The nanoPAC’s user- friendly interface is easily adjustable in 1V and 1mA increments, making it perfect for separations where precise settings are required. Its ultra compact size and two pairs of parallel power terminals, which can run two electrophoresis units simultaneously, save time and bench space. Maximum Voltage: 300 V Maximum Current: 400 mA Maximum Power: 60 W Number of Output Pairs: 2

2 pair banana jack sockets Voltage: 0 – 8 V Amperage: 6.3 A

Voltage range: 0 – 500 V Amperage range: 0 – 500 mA Power range: 0 – 150 W Timer: 1 – 999 min/0.1 –  (more)99.9 h Outputs dual in parallel, floating Leakage detection: > 500 μA No load detection: < 0.1 W Dimensions: 300 x 120 x 180 mm Weight: 5 kg

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

The power source of the brand Pharmacia type MultiDrive XL is designed for use in combination with e (more)lectrophoresis and isoelectric focusing (IEF). This power source can control and supply the three electrical parameters voltage, current and power. The duration of the run can be controlled by setting values for the following parameters: time, voltage and milliamperes per hour. In addition, the Pharmacia MultiDrive XL contains nine pre-programmed methods. Specifications Voltage: 3500V Current: 400mA Power: 150W Dimensions (WxDxH): 365 x 300 x 160 mm

Small footprint, inexpensive, portable mini power supplies for use with small or mini horizontal and (more) vertical electrophoresis apparatus. Output voltage: ≤400 V Output power: ≤50 W Output current: 250 mA at 200V, 125 mA at 400V 3 parallel outputs (4 mm sockets) 1 V or 1 mA resolution Voltage or current shown on large LED display Overload protection, including protection against accidental short circuit at output terminals

The suitcase contains, Multiparameter, Field Meter pH/ORP/EC/°C Meter H1768195/4 Probe Probe cable 4 (more) meters long Probe weight, for probe USB cable for connection to laptop Cleaning liquid Hanna, general. In addition to the case, there are also calibration fluids that are purchased with it; calibration fluid ORP 470 mV, value 31.46 Euro calibration liquid pH 7.01, value 19.36 Euro calibration liquid pH 4.01 value 19.36 Euro calibration fluid 1413 US/CM Value 19.36 Euro Storage liquid Value 19.36 Euro Cleaning liquid Value 19.36 Euro When purchasing the H1768195/4, these fluids are included for free.

Operating Temp. Min.: 4°C Operating Temp. Max.: 40°C Power Consumption : 120 W Dimensions: (H x W x  (more)D): 95 x 250 x 215 mm Weight : 3 kg Timer Operation: 1 min to 24 h, continuous

Small footprint, inexpensive, portable mini power supplies for use with small or mini horizontal and (more) vertical electrophoresis apparatus. Output voltage: ≤400 V Output power: ≤50 W Output current: 250 mA at 200V, 125 mA at 400V 3 parallel outputs (4 mm sockets) 1 V or 1 mA resolution Voltage or current shown on large LED display Overload protection, including protection against accidental short circuit at output terminals

Output: Constant voltage, constant current with automatic crossover Voltage: 10 V to 300 V, fully ad (more)justable in 1 V steps Current: 5 mA to 400 mA, fully adjustable in 1 mA steps Power: 75 W Terminals: 4 pair recessed female banana jacks, floating in parallel Timer: 001 to 999 minutes, fully adjustable Ripple: ±1% (at 300 V and 75 W) Line regulation: ±0.5% (at 300 V and 750 W) Load regulation: ±1% (at 300 V for a 50% change in output load) Drift: ±1% (after 30 min warm up at 300 V and 75 W) Voltage stability : ±1 V Current stability : ±1 mA Dimensions (DxWxH): 290 x 210 x 80 mm Weight: 1.8 kg Including a XCell SureLock electrophoresis cell