Anritsu Pulse Pattern Generator MP1652A - M34976 Lab

Voltaire ISR-9288 Grid Director This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Kramer 16X16 RGBHV & Audio Matrix Model VP-1616 This was removed from a university where it was  (more)surplus to requirements. The unit powers on and is in good cosmetic condition. The Faceplate of the unit can come off via 2x quick-release screws. One of the quick-release screws has snapped on the RHS of the unit leaving the faceplate wobbly. The fans are working but it has not been tested further.

This listing is for a DELL PowerConnect 2808 Smart Switch. The unit is in full working condition an (more)d is ready for immediate release. DELL PowerConnect 2808 Smart Switch The PowerConnect 2808 is an 8-port web-managed switch designed for diverse networking needs, from small workgroups to branch office aggregations. Key Features: Gigabit Ethernet Ports: 8 x 10/100/1000Base-T auto-sensing ports, ensuring high-speed connectivity for devices. Power Efficiency: Incorporates power reduction for short cables or inactive connections, contributing to energy savings. Auto-Negotiation: Automatically negotiates speed, duplex mode, and flow control for optimal performance. Virtual Cable Diagnostics: Uses Marvell’s technology for diagnostics, allowing for easier troubleshooting of connectivity issues. Visual Monitoring: Equipped with integrated LEDs for real-time monitoring of switch status and port activity. High Capacity: Switch Fabric Capacity: Up to 16 Gbps Forwarding Rate: 11.9 Mpps, supporting smooth data transmission. VLAN Support: Supports up to 64 port-based VLANs, enhancing network segmentation and security. Quality of Service (QoS): Provides 4 priority queues per port, utilizing 802.1p and IP DSCP values for traffic prioritization. Link Aggregation: Adheres to IEEE 802.3ad standards, supporting up to 4 link aggregation groups with 4 ports each, improving bandwidth utilization. Security Features: Local passwords and restricted IP addresses ensure secure switch access. Port Mirroring: Allows mirroring of four source ports for effective network traffic monitoring and troubleshooting. DHCP Support: Includes an internal DHCP server and client support for simplified IP address management. User-Friendly Management: Easily configurable via an intuitive web-management interface, with easy upload/download of configurations and switch software. Enhanced Performance: Jumbo frame support for packets up to 9000 bytes, optimizing large data transfers. Network Stability:

13 x Flexlight Networks Optimate Units These were removed from a university lab where they were surp (more)lus to requirements. 1x OPtimate 2500Model OPtimate2500LTP/N 2500CHASS0000000D1The unit is in good cosmetic condition. We were unable to power the unit without the correct power source. 510NT units:Model Optimate510NT4x P/N 0511-00-2002x P/N 0511-T1310R149001D1The unit is in good cosmetic condition. We were unable to power the unit without the correct power source. 530NTModel Optimate530NT5x P/N 0530-00-100The unit is in good cosmetic condition. We were unable to power the unit without the correct power source. Accessories:6x brackets6x rack mount brackets P/N PASM050022x Optimate 2500LT Optical drawers2x rack clips

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

RMCS system is a proprietary RADWAG software intended for support of calibration and testing procedu (more)res in a laboratory, from the moment of accepting an order, through its progress to calibration certificate issuing. The software manages the complete calibration and testing process. Mass comparators and software for network management of calibration process provide improved efficiency, reliable measurement results and complete calibration process documentation, plus lower labour costs. The system enables to initiate the calibration procedure by means of a task order sent to a mass comparator, and autonomously by the mass comparator itself. In both cases, the data is transferred to the software for the purpose of registering, controlling and finally issuing a calibration certificate. Mass comparators linked in the RMCS system autonomously communicate with THB modules recording ambient conditions (temperature, humidity, atmospheric pressure) throughout the whole control process. The modules are detachable from the mass comparators, this makes calibration of their sensors easy. Data on current ambient conditions is displayed in real time on mass comparator’s display. The data is also sent do RMCS software for control and archiving purposes. System modules: Ambient conditions monitoring module Installed, direct communicates with the mass comparator; Record of ambient conditions (temperature, humidity, atmospheric pressure) and air density calculation; Constant monitoring of ambient conditions in direct vicinity of the mass comparator and its weighing chamber; Graphic presentation of ambient conditions on mass comparator’s display. Weighing module Automatic and/or manual mass comparators as components of the RMCS system; Access to reference weights and test weights databases via RMCS software; Performance of calibration tasks ordered via the RMCS software; Self-test procedure determining mass comparator’s repeatability parameter; Transfer of measurement results to the software memory. Calculating and data storage module Sending tasks to mass comparators; Downloading mass and ambient conditions data from mass comparators; Operation on client databases / tasks / standards; Monitoring of calibration dates; Database of completed calibrations, documentation printing and archiving. Functions Complete management of a metrology laboratory calibrating mass standards and weights using RADWAG mass comparators of Y series; Calibration using ABBA and ABA methods; Network supervision over many PC workstations thanks to use of MS SQL database; Complete management of calibration orders; Extended database of reference weights and test weights; Extended database of clients, operators and users; Database of manual and automatic mass comparators; Database of calibration orders; Management of pending tasks based on issued calibration orders; Tasks and orders schedule; Not ordered weight test – quick check; Manual or automatic calibration of weights; Communication with automatic RADWAG mass comparators; Bilateral data synchronization with RADWAG mass comparators; Calibration process reports; Issuing calibration certificates according to pre-defined template; Export of report results to various file formats: PDF, MS Word, Excel; Record of events; Register of orders and calibration certificates; Archive files of calibration protocols, orders, calibration certificates and ambient conditions; Secured access to the software – log in procedure using password.

Digitimer LTD Isolated Stimulator Model DS2A This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up but has not been tested further. It is in reasonable cosmetic condition with marks from use.

Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer System Features - Patented moisture senso (more)rprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer System includes the Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with stainless steel coil and collector, Labconco 7522900 16-Port Drying Chamber, and an Edwards RV8 Vacuum Pump. The Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58F), suitable for aqueous samples. The Labconco 7522900 16-Port Drying Chamber includes 16 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 3/4" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV8 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer System includes: - Labconco 701211010 FreeZone 12L -50C Complete Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522900 16-Port Drying Chamber - Edwards RV12 Vacuum Pump - All Vacuum Tubing - Edwards EMF 20 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Temperature range: 0°C – 50°C Alarms: Acoustic and visual, High/Low temperature alarms and door alar (more)m Access port: 1 pcs. Ø 24.5 mm Material interior: Stainless steel Material exterior: White lacquered steel Volume: 484 litres Air system: BioLine ventilated air distribution system Defrost system: Automatic smart defrost with re-evaporation of defrost water Dimensions (WxDxH): 815 x 756 x 2275 mm Weight: 152 kg

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW