Voltaire ISR-9288 Grid Director

This Anrtisu Portable STM-16 Analyzer Model MP1656A was removed from a university lab where it was s (more)urplus to requirements. The unit powers on and is in good cosmetic condition. There are some tape marks around the unit from general use. The fan started up almost immediately after powering on the unit and all buttons appear to be responsive. With it is; 1 x IDEC Key: Mod No. 132

This Tanberg Edge 95 Video Conferencing System was removed from a university where it was surplus to (more) requirements. The system includes; Tandberg TTC7-14Tandberg TTC8-01 Camera (SN-20A80125) Powers onTandberg TRC 4 Remote (requires 4 x AAA Batteries)Audio Technica MicrophonePC CableEthernet CablePSU (TTC7)12vdc Power Supply (Camera) The item is in a reasonable, used cosmetic condition but the camera is a bit sticky from the age of the rubber components.

This listing is for a DELL PowerConnect 2808 Smart Switch. The unit is in full working condition an (more)d is ready for immediate release. DELL PowerConnect 2808 Smart Switch The PowerConnect 2808 is an 8-port web-managed switch designed for diverse networking needs, from small workgroups to branch office aggregations. Key Features: Gigabit Ethernet Ports: 8 x 10/100/1000Base-T auto-sensing ports, ensuring high-speed connectivity for devices. Power Efficiency: Incorporates power reduction for short cables or inactive connections, contributing to energy savings. Auto-Negotiation: Automatically negotiates speed, duplex mode, and flow control for optimal performance. Virtual Cable Diagnostics: Uses Marvell’s technology for diagnostics, allowing for easier troubleshooting of connectivity issues. Visual Monitoring: Equipped with integrated LEDs for real-time monitoring of switch status and port activity. High Capacity: Switch Fabric Capacity: Up to 16 Gbps Forwarding Rate: 11.9 Mpps, supporting smooth data transmission. VLAN Support: Supports up to 64 port-based VLANs, enhancing network segmentation and security. Quality of Service (QoS): Provides 4 priority queues per port, utilizing 802.1p and IP DSCP values for traffic prioritization. Link Aggregation: Adheres to IEEE 802.3ad standards, supporting up to 4 link aggregation groups with 4 ports each, improving bandwidth utilization. Security Features: Local passwords and restricted IP addresses ensure secure switch access. Port Mirroring: Allows mirroring of four source ports for effective network traffic monitoring and troubleshooting. DHCP Support: Includes an internal DHCP server and client support for simplified IP address management. User-Friendly Management: Easily configurable via an intuitive web-management interface, with easy upload/download of configurations and switch software. Enhanced Performance: Jumbo frame support for packets up to 9000 bytes, optimizing large data transfers. Network Stability:

This listing is for a DELL PowerConnect 2816 Smart Switch. The unit is in full working condition an (more)d is ready for immediate release. The PowerConnect 2816 is designed for optimizing network performance in smaller environments, making it an excellent choice for various applications. Key Features: Ports and Interface: 16 x RJ45 Ports supporting speeds of 10/100/1000 Mbps, ensuring robust connectivity for multiple devices. Buffer Memory: Equipped with 2MB buffer memory, allowing efficient handling of network traffic and reducing latency. PoE Support: No Power over Ethernet (PoE) support, meaning external power sources are necessary for PoE devices. Stackable Design: Its stackable feature simplifies network expansion, enabling seamless integration of additional switches as network demands grow. SNMP Support: Supports Simple Network Management Protocol (SNMP), facilitating remote management and monitoring of network performance. Quality of Service (QoS): Offers QoS capabilities to prioritize critical network traffic, enhancing performance for high-demand applications like VoIP or video conferencing. VLAN Support: Supports Virtual Local Area Networks (VLANs), allowing for effective traffic segmentation and isolation, which enhances security and efficiency. Jumbo Frames: Capable of supporting jumbo frames up to 9000 bytes, which can improve data transmission efficiency, especially for large data transfers. Standards Compliance: Complies with various networking standards (e.g., 802.3, 802.3u, 802.3ab, 802.1Q, 802.3ad, and 802.1p), ensuring compatibility with a wide range of devices and networks. Managed Device: Being a managed switch, it allows for detailed configuration, monitoring, and management of network settings, ensuring optimal network performance. Ideal Applications: Businesses and Offices: Suitable for small to medium-sized enterprises needing reliable network performance without unnecessary complexity. Educational Institutions: Perfect for schools that require a robust and manageable network for students and faculty. Retail Environments: Ideal for shops that need dependable connectivity for point-of-sale systems and customer Wi-Fi.

This Orbit Marine AL-7100-LCU Local Control Unit was removed from a university lab where it was surp (more)lus to requirements. The unit is in good cosmetic condition with marks from use. It has not been tested.

Voltaire ISR-9288 Grid Director This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

METTLER TOLEDO XSR1202S Precision Balance This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up with a 12V DC supply (not included), but the control buttons are not functioning. It is sold for spares/repairs.

Memmert IN30plus Natural Convection Incubator 32L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L (1.1 cu.ft.) stainless steel chamber for efficient and durable sample storage - Precise temperature control with an adjustable range from +20°C to +80°C, ensuring consistent performance even 5°C above ambient - Dual Pt100 sensors in a 4-wire circuit deliver reliable monitoring and safety redundancy - Intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller for enhanced user experience - Natural convection for uniform temperature distribution, perfect for sensitive applications - Electronically adjustable air flap provides optimized pre-heated fresh air admixture for sample protection - Maximizes productivity with a chamber load capacity of 132 lbs, supporting heavier samples - Built-in AutoSAFETY and autodiagnostic systems ensure worry-free operation and advanced protection The Memmert IN30plus Natural Convection Incubator 32L, 115V offers precise and reliable temperature control for sensitive sample incubation. With a setting temperature range of +20°C to +80°C and working capability 5°C above ambient, this compact 32 L stainless steel chamber is ideal for a variety of laboratory needs. Equipped with dual Pt100 sensors in a 4-wire circuit, it ensures accurate monitoring and safety through redundancy. The TwinDISPLAY ControlCOCKPIT with an adaptive PID-microprocessor controller provides intuitive user control, while the natural convection system ensures uniform temperature distribution throughout the chamber. Designed for efficiency and user convenience, the incubator features an electronically adjustable air flap for the precise admixture of pre-heated fresh air. With a maximum chamber load of 132 lbs, it supports high-capacity sample handling. The Memmert IN30plus also includes advanced safety features, such as AutoSAFETY, an overtemperature monitor, and an autodiagnostic system, ensuring continuous and secure operation. This high-performance incubator is a dependable solution for labs seeking consistent results and easy operation. INCLUDED: TheMemmert IN30plus Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The terminal is intended to be a component of a vast range of industry scales – from small tab (more)le-top scales, through platform, ramp, track and pallet scales, to livestock scales. It is equipped with a stainless steel housing of high ingress protection, IP 66/IP 67/IP 69. By standard the terminal features RS 232 and USB interfaces. Operation Ergonomics and Durability A brand new design of the housing makes the terminal a compact device, which positively influences the comfort of operation. Another useful facility is the multifunctionally, this feature allows to operate the device when placed on a table or mounted to a post. In either case, tilt regulation is available. The said tilt regulation is also a convenience offered by a wall-mounting bracket. Besides, high ingress protection rate, which is the basic characteristic of the terminal, means failure free operation under harsh industrial conditions. Working Modes and Functions The terminal has been equipped with numerous working modes: Parts Counting, +/- Control, Percent weighing, Totalizing, Peak Hold and Animal Weighing. Additionally, it enables defining of simple printouts in accordance with GLP procedures, and features weighing and ALIBI memory with export option, real time clock, and extensive tare functions. Communication Interfaces and Exchange of Information with External Devices Possibility to furnish the terminal with additional interfaces, makes its adaptation to customer requirements easy. This facilitates especially communication with stack lights and external buttons controlling scale functions (zeroing, taring and printout), and integration with unsophisticated automation systems. The terminal allows for communication with external devices such as receipt printer, additional display, computer or USB flash drive. Battery as an Optional Power Source Use of the optional battery enables the PUE H315 terminal to operate even when there is either no or unstable power supply.

Accuris myGel InstaView Complete Electrophoresis System with Blue LED Illuminator The myGel InstaVie (more)w comes complete with everything needed to cast, run and view mini electrophoresis gels, including an integrated power supply. One large (10.5x10cm) or small (10.5x6cm) gel is accommodated by the gel tank. Gels are easily poured using the supplied trays, combs and leak-proof casting stand. The power supply connects directly into the gel tank – no more leads to contend with. The connection is guaranteed to be right, every time. Output voltage can be adjusted to 35V, 50V or 100V and run time can be set for up to 99 minutes. A magnetic interlock between the gel tank and the lid prevents current from running through the system when the lid is not properly in place. Once the myGel InstaView System is set up, simply slide the mini LED transilluminator into place under the tank and at any time turn it on to view the run in real time. An array of blue LEDs emits bright blue light at a wavelength of 465nm for optimal excitation of common green fluorescent stains such as SmartGlow™, SYBYR™ Green and Gel Green, without damaging DNA. An orange filter is incorporated into the lid for visualizing DNA bands without any additional equipment or special glasses. When it’s time to document results, place the included gel imaging enclosure over top of the myGel InstaView, and use the camera app on any smart phone to capture high resolution images without removing the gel from the tank. Images are easily shared via email or text message or printed. Click Here to View Product Video INCLUDED: The Accuris myGel InstaView Complete Electrophoresis System with Blue LED Illuminator includes: - Power Supply - Gel Tank - Gel Trays - Combs - Leak-proof Casting Stand - Blue Light LED Illuminator - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty