Laser Quantum Finesse & FPU 35 Power Supply Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

The PowerPac is the ideal solution for field research, as a power outage backup or if independence o (more)f mains power during weighing is required. It holds sufficient charge to keep your balance or other devices going for up to 20 hours, depending on the model. Recharging is made easy, by simply connecting the PowerPac while the balance is on mains power. The balance is fully functional during recharging. Suitable voor Mettler TE industrial precision scales.

Spellman Power Supply RSBX30X3077Model: RSBX30X3077 This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition, but we are unable to test it at our facility. Includes 9-pin FEMALE DIN Cable.

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

BioRad  Mini-PROTEAN ll vertical electrophoresis system. Up to 2 gels. It Includes: tetra blot modul (more)e, 2 cassettes, buffer tank, casting system, lid with power cables and original user manual. Specifications:

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Frame intended for 4-load-cell powder-coated scales C9, that are to be embedded in the ground.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Scilogex Paddle stirrer, 316L stainless steelThe Scilogex Paddle Stirrer 316L is made of stainless s (more)teel. Shaft 400mm long x 8mm diameter, impeller is 67mm width x 67 mm height. INCLUDED: The Scilogex Paddle Stirrer 316L includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus SHHD1619DG Heavy Duty Shaker The OhausSHHD1619DG 16 kg Capacity Digital Heavy Duty Orbital Sha (more)ker is designed for awide range of applications, including cell cultures, that require accurate andrepeatable results. The microprocessor control provides consistent uniformshaking while safely ramping to the set speed. With loadcapacities from 35 lbs and over 70 accessory options, and with microprocessorcontrol to provide variable speed and consistent shaking, while ramping to theset speed. Microprocessor displays the last set-point and will restart if poweris interrupted. Built-in tray and non-slip rubber mat included with theSHHD1619DG. The exclusiveAccu-Drive shaking system on digital models utilizes dual-speed sensors tocontinuously monitor and maintain shaking speed - delivering exceptional speedcontrol, accuracy and durability. Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero. Speed rampingfeature slowly increases the speed to desired setpoint to avoid splashing. Theload sensor detects unbalanced conditions and automatically reduces rpm to asafe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD1619DG Heavy Duty Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty