Bio-Rad PowerPac HC High-Current Power Supply

Small footprint, inexpensive, portable mini power supplies for use with small or mini horizontal and (more) vertical electrophoresis apparatus. Output voltage: ≤400 V Output power: ≤50 W Output current: 250 mA at 200V, 125 mA at 400V 3 parallel outputs (4 mm sockets) 1 V or 1 mA resolution Voltage or current shown on large LED display Overload protection, including protection against accidental short circuit at output terminals

Output: 0 to 250 V DC, 2.5 A Dimensions (DxHxB): 294 x 228 x 131 mm

Voltage range van 0-300 V. Ampere range van 0-100 mA. Power: 55 VA. Dimensions (H x W x D): 98 x 220 (more) x 180 mm.

Riello S3T 20 XTD T5 Power Supply Lab This item was removed from a university where it was surplus t (more)o requirement. It is in reasonably good cosmetic condition, we are unable to test it as it was originally hardwired and has since had its power housing removed.Therefore, it is listed as Spares/Repair. Power supply cable not included.

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Hoefer PS200HC High Current Electrophoresis Power Supply Voltage 5 to 200 V in 1 V step Current 10 t (more)o 2000 mA in 1 mA steps Maximum Wattage 200 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 200 V, 10 to 2000 mA, 200 W - Four sets of 4 mm output jacks - Ideal choice for blotting applications - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS200HC High Current Electrophoresis Power Supply is an essential tool for large electrophoretic blotting applications and low voltage electrophoresis runs. Its compact design, large handle, and user-friendly interface make setup and operation simple, ensuring seamless integration into any lab. Featuring a large, easy-to-read LED display, the PS200HC allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs with ease. With a power range of 5 to 200 V and 10 to 2000 mA, this power supply delivers up to 200 W of reliable performance. The PS200HC operates in three distinct modes: Constant Voltage Mode, where the power supply maintains the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where it maintains the selected current flow by adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to operating limits, the system switches to maintaining the other parameter. Key features such as automatic recovery after power failure, short circuit and open circuit protection, and four 4 mm output jacks enhance its flexibility and safety. Designed for both continuous operation and timed runs, the PS200HC is the ideal choice for dependable, high-current electrophoresis applications. INCLUDED: The Hoefer PS200HC High Current Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

0

Christie Digital 1.2-1.9:1 Zoom Short Lens This was removed from a university lab where it was surpl (more)us to requirements. The unit is in good cosmetic condition but has not been tested.

Singer Instruments Serial Filler Automatic Plate Pourer This item was removed from a university wher (more)e it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. Power supply included.

Bioquell H202 Decontamination System Z-2 & R-10 This was removed from a university lab where it (more) was surplus to requirements. The lab confirmed they were fully working prior to removal. Included are the following; Bioquell Z-2Model no. TD068-0000-230VSN - 201104BZ21160(5L Container inside is empty)Hours run - 59A warning for calibration due came up, was due 14/07/23 Bioquell R-10Model no. TD060-5900-230VSN - 201106BR1253 Both units power on and are in good used cosmetic condition.

IKA R 3004.1 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Featur (more)es - Generates radial flow for efficient mixing from both top and bottom - Suitable for aerating low viscosity media and homogenizing solids in liquids - Designed for use at medium to high speeds for diverse applications - Constructed from AISI 316L / 1.4571 stainless steel for durability and corrosion resistance - Operable within an ambient temperature range of 5 - 40 °C for versatile lab environments The R 3004.1 Blade Stirrer is specifically engineered to create a radial flow, effectively mixing materials from both the top and bottom for comprehensive results. Ideal for aerating low viscosity media and homogenizing solids in liquids, it's suited for medium to high-speed applications across a broad spectrum of laboratory uses. Featuring a 50 mm stirrer diameter and a 565 mm shaft length, this stirrer is made from AISI 316L / 1.4571 stainless steel, ensuring durability and longevity. Designed to operate within an ambient temperature range of 5 - 40 °C, it offers a perfect blend of functionality and practicality for professional settings.INCLUDED: The IKA R 3004.1 Blade stirrer includes: - IKA R 3004.1 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA C-Mag HS 4 Digital Magnetic Hotplate Stirrer Speed Range 100 to 1,500 RPM Heating Temp. Range  (more)50 to 500°C Stirring Quantity Max. 5 l Features - Powerful motor for stirring quantities of up to 5 l (H2O) - Simultaneous digital display of target and actual temperatures via LCD display - Directly connection for a PT 1000 temperature sensor enable a precise temperature control (included in delivery) - Control accuracy in medium +/- 0,5 K (in combination with PT 1000) - Display of actual temperature value in medium with 0,1 K resolution when using PT 1000 temperature sensor - 3 operating modes to choose (standard, safe, adjustment protection) - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Digital error code display - Elevated control panel for protection against leaking liquids The IKA C-Mag HS 4 Digital Magnetic Hotplate Stirrer is a powerful and versatile lab tool, ideal for stirring quantities up to 5 liters (H2O) with a speed range of 100 - 1500 rpm. It features a simultaneous LCD display of target and actual temperatures, and includes a PT 1000 temperature sensor for precise control with an accuracy of +/- 0.5 K. With three operating modes (standard, safe, adjustment protection), a fixed safety circuit at 550 °C, and a Hot Top indicator, it ensures safe operation. The ceramic set-up plate provides excellent chemical resistance and heats up to 500 °C. The stirrer’s compact design, durable construction, and advanced features, including a digital error code display and elevated control panel, make it a reliable choice for various laboratory applications.