Consort E143 Power Supply

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: CTC Analytics Model: MN 01-00 PAL Power Supply Description: CTC Analytics MN 01 - 00  (more)PAL power supply. Specifications: - Electrical requirements: 100-240V, 120W, 50/60Hz - Environment: 4°C - 40°C constant temperature, < 80% humidity (noncondensing) - Weight: 10 kg Items delivered: - CTC Analytics MN 01-00 PAL power supply- Conection Cable- Power cord Condition: The power supply is in very good cosmetic condition. It is 100% functional tested and ready to be applied.

This listing is for 1 of 11 Introgen Powerease 500 Power Supply. The unit is in full working condit (more)ion and is ready for immediate release.

This listing is for a Trust 1000VA UPS. The unit is in full working condition and is ready for imme (more)diate release. The Trust 1000VA UPS is a compact and dependable uninterruptible power supply designed to protect your electronic devices from power interruptions and fluctuations, ensuring continuous operation. Key Features: Compact Design: The UPS is designed to save space while delivering robust performance, ideal for home offices, small businesses, or IT setups. Power Capacity: 1000VA Rating: Provides a maximum power rating of 1000VA, which is suitable for most computer systems, networking equipment, and peripherals. Surge Protection: Equipped with 3 surge-protected IEC power outlets, it safeguards connected devices from voltage spikes and surges, enhancing the longevity of your equipment. LED Indicators: Green LED: Indicates normal operation when connected to utility power. Yellow LED with Sound: Alerts users to a loss of utility power. Red LED with Sound: Signals an error, such as: Overloading: Connected devices draw more power than the UPS can support. Battery Life Warning: The battery may be nearing the end of its useful life (typically 2-4 years). LCD Display: An easy-to-read LCD provides real-time information on: Input and output voltage Power line status Battery health, allowing users to monitor the UPS performance at a glance. Smart Management Function: The UPS features a smart management function that enables automatic shutdown of connected devices during a mains power outage when connected via USB, preventing data loss and hardware damage. Additional Protection Features: The UPS includes an RFI filter, surge protection, and Automatic Voltage Regulation (AVR), which stabilize voltage fluctuations, ensuring reliable operation. Also provides modem/fax/phone protection to safeguard communication lines. Included Accessories: Comes with a detailed user’s guide and wall power connection, facilitating quick setup and user understanding.

Major Science Minis 150VS Power Supply New equipment in its original packaging Smart Minis 150V powe (more)r supply for electrophoresis

Powerful stirring for your lab reactions AREC features state-of-the-art heating plate technology, de (more)signed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the AREC for demanding laboratory reactions, stirring volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. SAFETY AND EASE OF USE FOR LAB OPERATORS The AREC stirrer with heating plate guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the plate temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic plate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. SAVE TIME AND SPACE WITH THE NEW CONTROL PANEL Thanks to the extremely bright and easy-to-read digital display, the temperature can be monitored constantly. Two new comfortable knobs: the one on the left for the temperature (up to 550°C), the one on the right for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the lab hood. It is not possible to connect AREC to the Cloud Ermes system.

Temperature range: 0 – 60°C Temperature constant (time): ±0.7 K Temperature constant (spatial): ±1.5 (more) K Ambient temperature: +10°C < T < +30°C Internal dimensions (WxDxH): 585 (2x) x 655 x 1335 mm Dimensions (WxDxH): 1420 x 810 x 2010 mm Weight: 220 kg

This compact device is the ideal external light source for fluorescence excitation in microscopy. Co (more)upling is preferably achieved via liquid light guides. The average service life of a lamp is 2,000 hours. The optimised internal air flow cools the lamp and enables quiet operation. A resettable operating hour meter shows lamp operating hours. The brightness of the lamp output can be varied in 5 steps (0-100%) by means of a mechanical dimmer unit. An ultra-fast shutter opens or closes after activation with approx. 6 ms. The shutter is actuated by means of an appliance switch, but is also possible externally by means of a remote control input or CAN-BUS connection. Equipped with a VIS-Lighting adapter. Dimensions (HxWxD): 210 x 130 x 290 mm Weight: 4,7 kg

57 x Units of Cryogenic Laboratory Freezer Racking These were removed from a university lab where th (more)ey were surplus to requirements. The units are all in good cosmetic condition. Most of them appear to have never been used. There are no sample drawers included. Included are; 40 x Large Racks73cm L x 14cm W x 88cm H 17 x Smaller Racks72cm L x 8cm W x 74cm H

It allows the observation of samples without losing temperature.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1&rdquo; colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal&rsquo;s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.