Bio-Rad PowerPac 300 Power Supply Electrophoresis 283BR

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Horizon 20-25 Horizontal Gel Electrophoresis Apparatus is designed for separation of preparative (more) and analytical quantities of nucleic acids. It is suitable for agarose gel electrophoresis procedures in which buffer circulation may be required. The Horizon 20-25 apparatus is designed for simplified gel casting and electrophoresis. This apparatus is engineered for durable performance and easy storage. Current range: 4 – 360 mA, 0.5 A max Voltage range: 250 VDC Max

This Agilent Technologies 3100 Offgel Fractionator  Model: G3100A was removed from a university (more) lab where it was surplus to requirements. The item is in good cosmetic condition. There are some scratches and stains, primarily along the lid and minor marks/scratches on the surface. The item powered on without issue. We were able to use the controller to access the settings for the different trays. When the trays activated they lit up to indicate they were functioning. The item also comes with the following:1x Agilent Fractionator ControllerModel: G3101A 1x Kingston Technology 1GB Compact Flash

C.B.S. Scientific Model 71 Water Bath DGGE-2001 DGGE Electrophoresis System Lab This was removed fro (more)m a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.  Both pump speeds (High/Low) work correctly. Included are; TankModel: DGGE-2001Volts (DC/Hz): 250VDCMaximum Operating Limits: 250VDC/30W/70ºC Polyscience Model 71 Analog Immersion Recirculating Water Bath Heater PumpModel: 71Voltage: 240RangeHz/A: 50/4.30S/N: G15327Rev: B

Hoefer SUBHT High Throughput Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 15 x 15 cm Ma (more)ximum Power Settings 300 V, 200 mA, 60 W Maximum Buffer Volume 1.2 L Features - Fast, error-free loading—Load an entire 96-well plate using a multichannel pipette - Simplified analysis—Fluorescent labels for each sample printed on a UV transparent gel tray allows for instant sample identification (matched to a 96-well plate) during post-run visualization - High throughput—Run up to 120 samples (96-well plate + 24 control and/or marker samples) in 30 minutes - Better reproducibility—Eliminate variability caused by running buffer pH drift and ionic gradient formation with optional buffer recirculation capability - Reduced buffer needs—Compact tank design needs less buffer to cover gel which not only reduces buffer consumption but provides greater control of voltage gradients and run times - Maximum flexibility—Fully compatible with a wide range of combs and accessories to meet all your high throughput and standard gel analysis needs The Hoefer SUBHT High Throughput Submarine Gel Electrophoresis Unit is designed for efficient, large-scale DNA screening applications, such as single strand polymorphism (SSP) analysis following PCR. This versatile unit can resolve DNA fragments ranging from 50 to 1000 base pairs in as little as 30 minutes, accommodating up to 120 samples, making it an ideal choice for labs focused on high-throughput workflows. Engineered for precision and speed, the SUBHT allows for seamless loading of an entire 96-well plate using a multichannel pipette. The UV-transparent gel tray with fluorescent labels matches the 96-well plate layout, enabling instant sample identification during post-run visualization. Compact and efficient, the SUBHT minimizes buffer consumption while ensuring consistent voltage gradients and reproducible results. With optional buffer recirculation ports to maintain pH stability, this unit provides both flexibility and reliability. It’s compatible with a range of combs and accessories, making it adaptable for various high-throughput and standard gel electrophoresis needs. INCLUDED: The Hoefer SUBHT High Throughput Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Fluorescent Labeled Running Tray with Casting Gates - 1 mm thick, 30 well combs, 4 pcs - Colored Loading Strips - Buffer Recirculation Ports, 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SUB25 Maxi-Plus Standard Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 25 x 30 cm (more) Maximum Power Settings 1000 V, 500 mA, 500 W Maximum Buffer Volume 3 L Features - Large format—25 x 30 cm gel tray is ideal for high throughput techniques - Multichannel pipette compatible combs—with a maximum 52 sample throughputreduce gel loading time - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Buffer recirculation ports—may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation - Colored loading strips—for easy well detection when loading - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB25 Maxi-Plus Standard Submarine Gel Electrophoresis Unit is a powerful tool for high-throughput nucleic acid screening, specifically tailored for analyzing PCR products and conducting genotyping studies. Equipped with a spacious 25 x 30 cm gel tray and 12 comb positions, the SUB25 allows for maximum throughput, handling up to 624 samples in a single run, making it ideal for labs focused on high-capacity workflows. Designed with efficiency in mind, the SUB25 includes multichannel pipette-compatible combs, allowing for quick loading and minimizing preparation time. Color-coded, height-adjustable combs offer clear identification and precise control over well depth, while buffer recirculation ports help maintain stable pH levels throughout the run. The UV-transparent running tray facilitates direct gel imaging, and colored loading strips make well detection easy and reliable. With side handles for safe transportation and casting gates for a secure, leak-proof seal, the SUB25 provides a dependable and user-friendly solution for demanding electrophoresis applications. INCLUDED: The Hoefer SUB25 Maxi-Plus Standard Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray w/Casting Gates - 1 mm thick, 26 well combs, 6 pcs - Colored Loading Strips - Buffer Recirculation Ports, 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This is being sold on behalf of a client. It is surplus to requirements. Collection only from the Wa (more)rwick area. Approx size 6.4m x 2.1m x 2.4m The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

The COLONIES COUNTER BCC-1 has been developed to do colonies counting tasks in the microbiology fie (more)ld, in a very comfortable and simple way. It consists of a retro-illuminated surface, marked with a Wolfh�egel graticule where the Petri dishes, are placed in order to identify each bacteria colony, through a magnifying lens 2x, adjustable height by a similar system to a toothed rack. Each time that the marker is pressed on the Petri dish the identified colony is marked, one count is registered on the counter, and an acoustic signal (Bip) is generated confirming the count. Metallic painted housing, digital counter up to 9999, with reset control, and provided with a multi-size holder, it allows to place Petri Dishes from 55mm up to 140mm, without any need of accessory centering adaptor. The illumination may be chosen between dark or light background, just with a simple control knob.

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interfaces: 2 x RS232, USB type A and USB type B. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Eppendorf Fixed Angle F-34-6-38 Rotor Eppendorf Fixed Angle F-34-6-38 Rotor with Lid, never used, ne (more)w in box. This rotor is for use with Eppendorf 5804, 5804R, 5810, and 5810R Benchtop Centrifuges. INCLUDED: The Eppendorf Fixed Angle F-34-6-38 Rotor includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf F-34-6-38 Rotor SpecificationsMax Speed11,000 RPMMax RCF15,500 x gCapacity6 x 85ml