HACH LANGE LT 200 DCO heating block

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

A laboratory oven with forced ventilation and an exceptional quality/price ratio! 100% Made in Italy (more) and with all accessories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:    - External structure in steel painted with anti-acid epoxy powder    - Inner chamber in 18/8 stainless steel    - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-F 52 FALC Forced Ventilation

UVP CL-1000 Ultraviolet Crosslinker This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

NESLAB Coolflow CTF33 Refrigerated Recirculator Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and powers on, although we were unable to set the desired temperature due to a display fault. Therefore, it is listed as Spares/Repair.

This Evoqua Ultra Clear UV UF Water Purification System was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonably good cosmetic condition with minor marks from use. Operation hours since last service - 703UV Lamp hours - 703

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.

ZWIEBEL calibration weight 100g class M1 INOX Laboratory calibration weight in stainless steel Brand (more): ZWIEBEL Weight: 100 g Type / class: M1 maximum permissible error: ± 5mg LZ 67 Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight weight slightly damaged, see photo

Capacity: 120 g Readability: 0.1 mg Repeatability: ≤±0.1 mg Linearity: ≤±0.2 mg Response time: ≤ 2 s (more) Pan size (inner diameter): 80 mm Pan surface: 64 cm² Weighing chamber height: 232 mm Dimensions (WxDxH): 213 x 342 x 340 mm Weight: 6.5 kg

This Edwards ECB8 Rotary Vane Vacuum Pump was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and has been fully tested by a service engineer. It is in full working order and did not require a service. It is in good cosmetic condition with minor marks.

This item has just arrived in our stock. Please enquire for further details.

KNF N920KT.29.18G Diaphragm Pump Ultimate Vacuum 2 mbar (abs.) Maximum Flow Rate 21L/min (1.2 m 3/h (more)) Protection Class IP20 Features - Clean, 100% oil-free operation - High suction speed, particularly in the low vacuum range - Adjustable speed control - Exceptionally quiet - Corrosion-resistant - Maintenance-free The powerful N 920 KT.29.18 G diaphragm vacuum pump uses a series of KNF technical innovations, including a special diaphragm stabilization system that makes it well-suited for all applications requiring high suctions speeds at low absolute pressures, in a compact size. INCLUDED: The KNF N920KT.29.18G Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty