Schneider Druckluft Air-Dryer Drucklufttrocknet PT0012A-SDSBL-F 200 l/min

This Whirlpool Automatic Ice Maker Machine  Model - K10 was removed from a university lab where (more) it was surplus to requirements. The unit powers up but we were unable to test it further. It's in reasonably good cosmetic condition with some marks from use. Because it was removed from a lab, this is being sold for strictly lab use only.

ARMAGARD Industrial Computer Workstation This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition and powers up, we are unable to test further at our facility.

NESLAB Coolflow CTF33 Refrigerated Recirculator Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and powers on, although we were unable to set the desired temperature due to a display fault. Therefore, it is listed as Spares/Repair.

NesLab CFT-75 Refrigerated Recirculator Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on. It is in good working order.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

This Leica ATC 2000 Compound Microscope was removed from a university lab where it was surplus to re (more)quirements. The unit powers on and is in good cosmetic condition. The stage is in good cosmetic condition and is functional. We used one of our own slides to photograph the clarity of the eyepieces and objectives. Included with it are; Leica Objectives:Blue Leica 440 Achro 40/ 0.66 ∞ / 0.17 Red Leica 438 Achro 4 / 0.1 ∞ /0.17 White Leica 467 Achro 100 /1.25 oil ∞/0.17 Yellow Leica 439 Achro 10/ 0.25 ∞ /0.17 The objectives are in good cosmetic condition. There is a little dirt on the housing from general use. Leica Eyepieces:1x Leica E2 WF 10x/181x 10XWF (191A) The eyepieces are in good cosmetic condition.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Eppendorf F-45-48-11 Fixed Angle Rotor, Cat. #: 5409712004 The Eppendorf F-45-48-11 Fixed Angle Roto (more)r, Cat. #: 5409712004, is a centrifuge rotor designed for use with the Eppendorf 5810/R Series centrifuges. This rotor has a maximum speed of 3,900 RPM and a maximum relative centrifugal force (RCF) of 2,568 x g. It can accommodate a maximum capacity of up to 16 x Microplates or 4 x Deepwell Plates, making it suitable for a range of applications in biological, biochemical, and clinical research. Overall, the Eppendorf F-45-48-11 Fixed Angle Rotor is a reliable and versatile centrifugation accessory that is ideal for high-throughput sample processing in laboratories. INCLUDED: The Eppendorf F-45-48-11 Fixed Angle Rotor, Cat. #: 5409712004 includes: - Eppendorf F-45-48-11 Fixed Angle Rotor - Full 1 Year Parts and Labor Warranty Eppendorf F-45-48-11 Fixed Angle Rotor SpecificationsMaximum Speed12,700 RPMMaximum RCF18,213 x gMaximum Capacity48 × 1.5/2.0 mL tubesRadius15.1 cmCentrifuge CompatibilityEppendorf 5810/R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW