B.O.B Stevenson Type 7736 MN 40500 Centrifugal Fume Extraction Fan

Integrated BMS Jet Nozzle Test Facility -CP3 Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable. Therefore, it is listed as Spares/Repair. Includes operation keys. Door key not included but can be opened with a standard control cabinet key.

Jun-Air Model 6/6-4 Quiet Running Compressor Lab This item was removed from a university where it w (more)as surplus to requirement. It is in good cosmetic condition and powers on. We are unable to test it further at our facility.

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN3/2051Serial No. 1561Manufactured 24.02.17Output 2051 KW/hr 7.0 MBtu/hrDungs Control System With Autoflame Combustion Management SystemPart Nos. MM10005, MM10004 Serial Nos. 21267, 52981 WEG W22 7.5hp 415 volt fan motor

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine This was removed from a university facility where (more) it was surplus to requirements. The unit is in full working order but has not been run since 2020. It is in good cosmetic condition with minor marks.

Sedgwick TA400 Table Saw with P&J Extractor Unit This system was removed from a university lab w (more)here it was surplus to requirements. The units are in good used cosmetic condition, showing typical signs of use. Both units are three-phase and run as expected. The system includes:- 1 x Sedgwick TA400 Table Saw - The saw operates smoothly and quietly. - Both emergency stop buttons function, with a brief deceleration before fully stopping. - Specs: - 400 mm saw blade - Tabletop dimensions: 900 mm W x 1120 mm L (without extension), 1720 mm W x 1120 mm L (with extension) - 1 x P&J PJDMV2.5-WT-1.5-3I Extractor Unit - The extractor runs efficiently alongside the saw, providing reliable dust extraction. Model: TA400

Gerber DSC 1500 Single Ply Automated Fabric Cutter This item was removed from a university where it  (more)was surplus to requirement. It is in good cosmetic condition, the previous client has stated it was in working order when last used. We were unable to test it at our facility as it has been decomissioned. Features:- Table size: 240 x 158 x 85cm ( l x w x h) - Cutting area: 183 x 152cm - Cutting speed: 1.1 meters per second Also includes the following: - Gerber carriage controller unit         Serial No. 2187        Year 2008 - HP Elitedesk 800 GI TWR PC running Windows 7 installed with Gerber Cutworks 5.1 software - HP KB-1156 keyboard - Iiyana Prolite Monitor - HP mouse part No. 672651-001 - Kramer data splitter box - Instruction Manual - Mechanical and Engineering Manual - 7 x Data cables *A compressed air system of 90 - 120psi at 14L/m is required for operation.*

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Heidolph 036110262 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 135mm Plate Temperature Rang (more)e 20 to 300°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - User-friendly design of our entry-level model, featuring two rotary knobs for easy access to stirring and heating functions - Set your desired speed and temperature effortlessly using the intuitive scale, with maximum values of 1,400 rpm and 300 °C - Ensure safety with the large safety distance between the heating plate and control elements - Activate the heating function separately with the LED button indicator - Durable and reliable Kera-Disk made of anodized aluminum, offering chemical resistance and scratch proof-properties - Precise heating power and temperature control, backed by PID heating technology - Maximize efficiency with compact dimensions (168 × 101 × 299 mm) The Heidolph 036110272 Mix 'n' Heat Core Advanced Sensor Package, 135mm Plate is designed with two rotary knobs to allow direct access to the two main functions. The speed and temperature are set using a scale. The maximum values are 1,400 rpm and 300 °C. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures 50 °C, protect against burns. The heating function can be activated separately and is indicated by the LED button lighting up. The patented Kera-Disk® footprint made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 135 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110262 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 135mm Plate includes: - Hei-PLATE Mix'n'Heat Core magnetic stirrer (135 mm diameter) - EKT Hei-Con electronic contact thermometer and Holder - Silicone Protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

Branson M1800 Mechanical Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and  (more)creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, as well as the ability to set continous operation Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change.Click Here to View Product Video INCLUDED: The Branson M1800 Mechanical Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Boekel Scientific 301200 Small Platelet Agitator The Boekel Scientific 301200 Small Platelet Agitato (more)r is designed for continuous quiet operation and to meet mixing requirements in the storage of platelets. For use with Boekel Scientific Platelet Incubator. Easy sliding and removable agitator shelves Rotation Failure alarm if not connected to Boekel Platelet Incubator Non-slide feet to alleviate unit walking on the bench as well as for placement within the Boekel Platelet Incubator Click Here to View Product Video INCLUDED: The Boekel Scientific 301200 Small Platelet Agitator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty