Selecta SELECT-HORN-2000367

This listing is for a Biotest Hycon RCS Air Sample Plus Air Sampler.The unit is in full working cond (more)ition and is ready for immediate release.The Biotest Hycon RCS Plus Air Sampler is a highly reliable microbial air sampling system designed to monitor the microbiological quality of ambient air. It is widely used across multiple industries such as pharmaceuticals, food and beverage, healthcare, and other sectors where air quality is critical. This device operates using the impaction principle, where airborne microorganisms are captured onto an agar strip via centrifugal force for subsequent analysis.Key Features:Impaction Sampling Method: Separates and captures airborne microorganisms onto an agar strip for precise microbiological analysis.Sampling Volumes:7 preset sampling volumes: 10, 20, 50, 100, 200, 500, and 1000 litres.3 user-defined volumes adjustable between 1 to 1999 litres, providing flexibility for various sampling requirements.Intrinsic Safety: Certified to ignition class “ib,” which ensures safe operation in explosion hazard or hazardous areas.GMP and FDA Compliance: The device meets industry-standard Good Manufacturing Practice (GMP) and FDA guidelines for use in regulated environments.Adaptability: Customizable settings to fit user-specific needs and different air sampling conditions.Ergonomic Design: The lightweight and portable design allows for ease of use in routine air quality monitoring tasks.

Plastic retention tank 70 liters on feet with grating 81x64x34 cm Plastic retention tank Capacity: 7 (more)0 liters Dimensions: 810 x 640 x 340 mm On 4 feet, with plastic grating, for storing chemicals in cans or drums Permissible load: 100 kg uniform distribution In polyethylene, color: YELLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Calder Pegasus  EF Control Unit V2.291 Fusion Welder This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and has actually never been used, but due to the fact it has been powered up over a year ago, it is now out of service, and will need to be serviced before it can be used again. For this reason it is sold for spares/repairs

Lancer 820 LX Undercounter Laboratory Washer and Dryer This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks. Internal dimensions - D51 W52 H52cm

Euromex bScope binocular digital microscope with built-in 5 MP camera, HWF 10x / 20 mm eyepieces and (more) quintuple turret with IOS objectives with infinite oil correction plan PLi 4/10 / S40 / S100x, stage 131 x 152/197 mm with XY stage integrated mechanical 75 x 36 mm without rack. 3W NeoLED ™ Köhler lighting and integrated power supply. Optional phase contrast. BScope microscopes are designed for intensive research use in high schools, universities, small laboratories, and veterinary applications. Euromex bScope DIGITAL BS.1157-PLi_B binocular digital microscope • Binocular model • Head with two observation heights • Integrated color CMOS camera 5,1Mp USB.2 • 2592 x 1944 pixels • 7 frames per second (2592 x 1944 pixels) • 27 frames per second (1280 x 960 pixels) • ImageFocus Alpha software CAMERA BScope digital microscopes are equipped with a 5.1 MP 1 / 2.5-inch USB-2.0 CMOS camera, 24-bit color depth, 7 frames per second (2592 x 1944 pixels) or 27 frames per second (1280 x 960 pixels). The dynamic range is 76 db and signal-to-noise ratio 41 db. Supplied with ImageFocus Alpha software, USB-2.0 cable, and 1mm / 100 part calibration pattern SOFTWARE ImageFocus Alpha capture and analysis software allows you to save images in .jpg, .tif, .bmp, or .dicom formats, as well as videos in .avi format. Measurements and annotations can be made on live or captured images. Compatible with Windows 7, 8 and 10, 32 and 64 bit configurations. Mac OS version available. Free updates can be downloaded

rack of 36 stainless steel test tubes D20/21mm In stainless steel laboratory rack of 36 tubes (9 out (more) of 4) For tube diameter: 20 or 21 mm

Hettich 2 place swing out centrifuge rotor for 320/320R Centrifuge.

TripleRed Alto-UF-R Water Purification System Lab This system was removed from a university lab, whe (more)re it was surplus to requirements. Both devices power up and communicate, but we are unable to them further at our facility. This system is in good overall cosmetic condition. A password is required to operate the system, which is available on request.

Heraeus Labofuge 400R Refrigerated Centrifuge With Swing Rotor Lab This item was removed from a univ (more)ersity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Also includes the following: 1 x Heraeus 8179 Swingout Rotor 4 x 180ml 1 x Round Bucket 180ml75008172 8 x Bucket Insert

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY’s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform – thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.