Miele Professional G 7883 Laboratory Glassware Washer Lab

Plastic retention tank 70 liters on feet with grating 81x64x34 cm Plastic retention tank Capacity: 7 (more)0 liters Dimensions: 810 x 640 x 340 mm On 4 feet, with plastic grating, for storing chemicals in cans or drums Permissible load: 100 kg uniform distribution In polyethylene, color: YELLOW

The G 7883 washer-disinfector is suitable for reusing laboratory glassware for analytical experiment (more)s in, for example, industrial, environmental and research laboratories. This appliance has a large two-tier wash area and can be built-in under a continuous worktop or used free-standing. After an intensive main cleaning phase, disinfection takes place at >90°C and a storage time of 5 minutes. The final rinse is performed with deionized water without rinsing agents. Control/programs: Multitronic Novo Plus control (certain process parameters can be changed), with 10 standard cleaning programs Program operation/display: Operation via one-button program selector, display of program cycles, display of temperature and program duration, display of program end, optical and acoustic signal, indicator lights for service and fault messages Cleaning mechanisms: Rotating: two spray arms on top and bottom of the chamber, third spray arm on top basket. Dosing devices: Valve dispensers for powdered detergent and liquid detergents. Circulation pump: 400 l/min Temperature: Freely adjustable up to 93°C Drain: 1 drain hose Drying capacity: Gravity convection drying system, 10 minutes. Can be turned on or off in any cycle Water connection: 1x hot water, 1x cold water, 1x purified water Dimensions (WxDxH): 600 x 600 x 850 mm Weight: 74 kg

This Interlas Syncrotig 375 AC/DC Gas Tungsten-Arc/Shielded Metal Arc TIG Welder was removed from a  (more)university engineering lab where it was surplus to requirements. We haven't tested it at our facility further than powering it up but the lab said it was fully working prior to removal. It is a complete system. Actual unit dimensions - D58 W80 H143.5cm (comes on a trolley for mobility)27 x 58cm Platform to hold gas bottles. it is in reasonably good cosmetic condition with marks from use.

Steelco LAB 500 SCDL Laboratory Washer This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta SELECT HORN muffle furnace is high-quality equipment designed to carry out calcination, heat treatment and other processes at high temperatures in a precise and controlled manner. With a heavy-duty heating chamber and a digital control system, this oven guarantees uniform heat distribution and a constant temperature throughout its interior. With a capacity of up to 1150°C, the Selecta SELECT HORN muffle furnace is ideal for research laboratories, chemical and metallurgical industries, as well as applications in the field of ceramics and jewelry. Its compact design and robust construction make it easy to use and maintain, ensuring reliable, long-lasting performance in every work cycle. In addition, the Selecta SELECT HORN muffle furnace has a safety system that protects both the equipment and the user, avoiding possible accidents during its operation. With an intuitive interface and programmable functions, this oven offers versatility and precision in each process, making it an indispensable tool for any laboratory or industry that requires high controlled temperatures.

Euromex bScope binocular digital microscope with built-in 5 MP camera, HWF 10x / 20 mm eyepieces and (more) quintuple turret with IOS objectives with infinite oil correction plan PLi 4/10 / S40 / S100x, stage 131 x 152/197 mm with XY stage integrated mechanical 75 x 36 mm without rack. 3W NeoLED ™ Köhler lighting and integrated power supply. Optional phase contrast. BScope microscopes are designed for intensive research use in high schools, universities, small laboratories, and veterinary applications. Euromex bScope DIGITAL BS.1157-PLi_B binocular digital microscope • Binocular model • Head with two observation heights • Integrated color CMOS camera 5,1Mp USB.2 • 2592 x 1944 pixels • 7 frames per second (2592 x 1944 pixels) • 27 frames per second (1280 x 960 pixels) • ImageFocus Alpha software CAMERA BScope digital microscopes are equipped with a 5.1 MP 1 / 2.5-inch USB-2.0 CMOS camera, 24-bit color depth, 7 frames per second (2592 x 1944 pixels) or 27 frames per second (1280 x 960 pixels). The dynamic range is 76 db and signal-to-noise ratio 41 db. Supplied with ImageFocus Alpha software, USB-2.0 cable, and 1mm / 100 part calibration pattern SOFTWARE ImageFocus Alpha capture and analysis software allows you to save images in .jpg, .tif, .bmp, or .dicom formats, as well as videos in .avi format. Measurements and annotations can be made on live or captured images. Compatible with Windows 7, 8 and 10, 32 and 64 bit configurations. Mac OS version available. Free updates can be downloaded

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Haake DC1 Clamp-On Immersion Heater Circulator For laboratory Operating temperature (The working tem (more)perature range is dependant on the cooling selected) : -30°C ... 100°C Température accuracy : 0.02 K 1000W 300 Mbar 17l/Min Immersion Depth 85 to 140mm 220V

Dynamic PCR hood ERLAB Biocap RNA DNA Captair ORGANIC For HEPA H14 filter (filter not replaced) Embe (more)dded vertical laminar flow Interior dimensions: 600x601x565 mm UV lamp with timer Power supply: 230 V. 50 Hz. 26 W Transparent acrylic walls, be careful, presence of numerous microcracks (see photos) Acrylic thickness: 10mm Total electrical power: 73W

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.