AirFlow Instrumentation LCA6000RVT Airflow Anemeter

This listing is for a AirFlow Instrumentation LCA6000RVT Airflow Anemeter.The unit is in full workin (more)g condition and is ready for immidate realese.The AirFlow Instrumentation LCA6000RVT is a high-performance airflow anemometer designed for accurate airflow measurements in various applications, including HVAC systems, industrial environments, and laboratory settings. This device combines advanced technology with user-friendly features to provide reliable data for ventilation and airflow assessment.Key Features:High Accuracy: Offers precise airflow measurements across a wide range, ensuring reliability in various applications.Digital Display: Features a clear digital display for easy reading of airflow data, enhancing user experience and operational efficiency.Multiple Measurement Units: Capable of measuring airflow in various units (e.g., m³/hr, l/sec, cfm), allowing flexibility for different user preferences and standards.Data Logging Capability: Equipped with data logging functionality, enabling users to record and analyze airflow measurements over time.Durable Construction: Built with high-quality materials designed to withstand rugged use in industrial and field environments.User-Friendly Interface: Intuitive controls and interface for easy navigation and operation, reducing the learning curve for new users.Battery-Powered: Portable design powered by batteries, making it convenient for on-site measurements without needing external power sources.Compact and Lightweight: Designed for easy handling and transport, making it suitable for fieldwork and various measurement locations.Specifications:Measurement Range: Covers a broad range of airflow velocities, accommodating different application needs.Operating Conditions: Suitable for use in various environments, including both indoor and outdoor settings.Calibration: Pre-calibrated for accuracy, with options for recalibration to maintain performance over time.

Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4 This unit came from an engineering  (more)university. It was used to develop and test for the motor industry. We were assured it was in good working order.  The Flange/Working Section External Dimension 56cm X 56cm Included is a basic working section with two access panels. Approximate size of working section 56cm x 56cm X 100cm. The Fan type is a K. Blackman 28 series. The fan uses 7.5 kw Electric Motor with an inverter control. It is split into 4 sections; Unit 1- Main Fan/Control Unit- 130cmx130cmx175cm.-330 kgUnit 2- Joint Section- 68cmx62cmx86cm.- 24 kgUnit 3-Large Tunnel Section- 217 cmx77cmx149cm.- 150 kgUnit 4- Work Access Unit- 57cmx54cmx81cm.- 22 kg. Please enquire if you would like a delivery quote. The last time when the nozzle calibration was ran for that tunnel and it went up to a measured airspeed of 26m/s (94km/h).

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel This was removed from a univ (more)ersity engineering department where it was surplus to requirements. The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling. It is in five sections: Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor. Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters. Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm. Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal. Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

Ekom DK50 2VS 10bar Industrial Air Compressor with Enclosure This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. The lab confirmed it was working prior to removal.

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Thermo Scientific Safe 2020 Class 2 Safety Cabinet S2020 1.8 This was removed from a university lab (more) where it was surplus to requirements. The unit powers up and is in good working order. It is not fitted with a UV lamp. It is in good cosmetic condition with marks from use. Frame dimensions - L191 W71 H89cm

The antivibration table has been designed to eliminate ground vibrations during the operation of lab (more)oratory equipment such as microbalances, analytical balances and others. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure and the tabletop are made of acid-resistant stainless steel.

IKA T25 Digital Easy Clean DisperserThe T 25 easy clean digital is a high-performance dispersing ins (more)trument with electronic speed control from 3.000 – 25.000 rpm for working volumes of 1 – 2.000 ml (H2O). A wide choice of S 25 dispersing elements, which are available as accessories, allow the T 25 to be used in many fields of application - whether it is homogenizing of medical samples, emulsifying of cosmetics or the suspension of coatings. In combination with an IKA laboratory reactor it is also possible to conduct dispersion tasks under vacuum or pressure.The dispersing tool is not included in the scope of delivery. Volume Range (H20) 0.001 - 2 L Speed Range 3,000 – 25,000 rpm Viscosity Max. 5000 mPas Features - Quick and easy cleaning of the easy clean dispersing tools, no disassembling required - Brushless motor guarantees dust-free and silent operation - USB interface for control and documentation via labworldsoft® - Timer/counter function - Increased safety through tool recognition and IP-class Click Here to View Product Video INCLUDED: The IKA T25 Digital Easy Clean Disperser includes: - T 25 easy clean digital - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA T25 Digital Easy Clean Disperser Specifications Motor rating input500 WMotor rating output400 WVolume range (H2O)0.001 - 2 lViscosity max.5000 mPasSpeed range3000 - 25000 rpmSpeed deviation2 %Speed control steplessSpeed display LEDNoise without element 70 dB(A)Extension arm diameter13 mmExtension arm length160 mmProcess typebatchTimeryesTimer displayLEDPermissible ON time100 %Dimensions (W x H x D)89 x 270 x 161 mmWeight3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 30USB interfaceyesVoltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input500 WComparison of ModelsSpecificationsIKA T10 Basic ULTRA-TURRAXIKA T18 Digital ULTRA-TURRAXIKA T25 Digital Easy CleanIKA T25 Digital ULTRA-TURRAXIKA T25 Easy Clean ControlIKA T50 Digital ULTRA-TURRAXMotor rating input125 W500 W500 W800 W500 W1100 WVolume range (H2O)0.0005 - 0.1 l0.001 - 1.5 l0.001 - 2 l0.001 - 2 l0.001 - 2 l0.25 - 30 lSpeed range8000 - 30000 rpm3000 - 25000 rpm3000 - 25000 rpm3000 - 25000 rpm3000 - 25000 rpm600 - 10000 rpmNoise without element65 dB(A)75 dB(A)70 dB(A)75 dB(A)70 dB(A)72 dB(A)Extension arm diameter8 mm13 mm13 mm13 mm13 mm16 mmExtension arm length100 mm160 mm160 mm160 mm160 mm220 mmTimer--Yes-Yes-Temperature measuring rangeN/AN/AN/AN/A0 - 125 °CN/AVoltage230 / 115 / 100 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }