Mettler Toledo PM4800 Precision Balance

This listing is for a Vibra HTR-220E Balance

METTLER TOLEDO AB54-S Laboratory Balance - 51g - 0.1mg METTLER TOLEDO Laboratory Precision Balance R (more)eference: AB54-S Maximum weighing capacity: 51g Accuracy: 0.1 mg (0.0001g) Resolution: 0.1 mg Readability: 0.1 mg Repeatability (s): 0.1 mg Linearity: 0.2 mg Display: LCD, 7 segments Units: g, lb, oz, ozt, GN, dwt, ct, mg, mo, m Weighing pan: 80 mm Weighing chamber height: 159 mm External dimensions of the balance (W x D x H): 245 x 321 x 344 mm Equipment tested

F1 Mass Standard - knob weights, service case. Nominal value - 2000 kg.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Ohaus PX623/E Pioneer Analytical Balance The Pioneer PX is a precision weighing tool tailored for la (more)boratory, industrial, and educational settings. It supports diverse applications from basic weighing to density determination. The instrument features a backlit LCD complemented by a secondary dot matrix line for detailed data visualization. With integrated RS232 and USB interfaces, it ensures efficient data communication, including GLP/GMP outputs synchronized with a real-time clock. Constructed with a durable metal base and removable stainless steel pan, the PX incorporates adjustable features such as environmental filters, auto-tare, and customizable calibration points. Safety indicators and multilingual options further enhance its professional utility.INCLUDED: The Ohaus PX623/E Pioneer Analytical Balance includes: - Power Cord - Two Year Manufacturer's Warranty

Volume air recirculation: 1205 m³/h Volume air exhaust: 494 m³/h Volume air total: 1699 m³/h Air flo (more)w: 0.45 m/s Internal dimensions (WxDxH): 1535 x 600 x 655 mm Dimensions (WxDxH): 1625 x 790 x 1380 mm Height support frame: 800 mm Weight: 290 kg

This Medline Scientific Incubated Shaker Model - IS-971RF was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It was set to 37˚C but only reached 31˚C. The display would keep reverting to 22.2˚C as well. There was a note from the lab stating that it had some heating issues. Inside dimensions - L89.5 x W63 x D48cmPlatform size - 46 x 76cm The shaker speed ran up to 160rpm. We tried setting it to the max of 300 but it wouldn't run at that. Cosmetically it is in a reasonable used condition but all the light tubes work bar one. It is sold for spares/repairs due to the fault.

INDENTEC Hardness Testing Machine Lab This item was removed from a university where it was surplus t (more)o requirement. It is in good cosmetic condition and powers on, however it displays the following error: Check Lead which prevents further use. It is listed as Spares/Repair. Also included: Calibration Certificate User Manual Optic Head

Heraeus Megafuge 1.0R Refrigerated Centrifuge This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in working order. The refrigeration was tested at 4˚C and worked well. It is in good cosmetic condition with marks from use. Rotor max RPM- 2800 The rotor holds 24 x 15ml tubes

Heraeus Heracell 150 Co2 Incubator Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition externally but the copper interior has tarnished.

IKA Microstar 30 Digital Overhead Stirrer Stirring quantity max. (H2O) 20 L Speed Range 0/50 - 500 (more) rpm Viscosity max. 20000 mPas Features - Compact design saves space in the laboratory - Constant torque throughout the entire rpm range - Easy operation with a stable rotary knob and clear LED display - Rapid software updates via USB interface - Durable brushless DC motor ensures reliable performance The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself: INCLUDED: The IKA Microstar 30 Digital Overhead Stirrer includes: - MICROSTAR 30 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Microstar 30 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)20 lMotor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 500 rpmViscosity max.20000 mPasOutput max. at stirring shaft15.7 WPermissible ON time100 %Torque max. at stirring shaft30 Ncm Speed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.3 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)60 x 173 x 126 mmWeight1.26 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mAComparison of ModelsSpecificationsIKA Microstar 15 Control Overhead StirrerIKA Microstar 15 Digital Overhead StirrerIKA Microstar 30 Control Overhead StirrerIKA Microstar 30 Digital Overhead StirrerIKA Microstar 7.5 Control Overhead StirrerIKA Microstar 7.5 Digital Overhead StirrerStirring quantity max. (H2O)10 l10 l20 l20 l5 l5 lMotor rating input32 W32 W32 W32 W32 W32 WSpeed displayLCDLEDLCDLEDLCDLEDSpeed range0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpm0/30 - 2000 rpm0/50 - 2000 rpmViscosity max.8000 mPas8000 mPas20000 mPas20000 mPas4000 mPas4000 mPasTorque max. at stirring shaft15 Ncm15 Ncm30 Ncm30 Ncm7.5 Ncm7.5 NcmTime setting range0 - 6000 minN/A0 - 6000 minN/A0 - 6000 minN/ATemperature displayYesN/AYesN/AYesN/AUSB interfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }