Heraeus Megafuge 1.0R Refrigerated Centrifuge With 2800RPM Rotor

BECKMAN Type JA-18.1 Centrifuge Rotor 1-96 This item was removed from a university laboratory where  (more)it was surplus to requirements. It is in reasonably good cosmetic condition and has not been tested. Includes: - Manual Specifications: - Type: 18.1 - Serial No.: 306

MSE Falcon 6/300 Centrifuge This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor. This item also includes the following: 1 x Mistral MSE Rotor - 43124 - Capacity: 4 x 750ml - SN: 986766 - Max RPM: 2500 - (There are no rotor buckets included)

Beckman J2-21 Floor Standing Centrifuge This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with only minor marks from use. Included are; Beckman J2 - 21 CentrifugeCat no. 341737SN - E948 Rotor Type - JA 10SN - 1734210,000rpm MaxHold 6 x Buckets 7cm diameter

Beckman Avanti 30 Compact Centrifuge with F0850 Rotor & Manual This item was removed from a uni (more)versity lab where it was surplus to requirements. It is in good clean condition with minor marks around the display screen. The centrifuge powers on, with screen and controls functioning correctly. Temperature and RPM settings are operational, and are in good working order (thermometer not included). Specifications: - RPM Range: 0-30,000 RPM (max RPM with F0850 Rotor fitted: 16,500)\ - Time Range: 0-9 hours 59 minutes - Temperature Range: -20°C to 40°C Includes: - Beckman F0850 Rotor - Capacity: 8 x 50 ml - Max RPM: 16,500 - Rotor removal tool - Beckman Avanti 30 Compact Centrifuge Instruction Manual - Beckman Instructions for using F0850 fixed-angle rotor

Hermle OLEUM Oil Testing Centrifuge, 230V ONLYThe OLEUM Oil-Testing Centrifuge is our stand alone oi (more)l testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle OLEUM Oil Testing Centrifuge, 230V ONLY includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Constant Cell Disruption Systems Model T2 40 AA AA Homogeniser French Press Lab This system was remo (more)ved from a university where it was surplus to requirement. The previous client stated this system was in full working order, prior to removal. When powered up, the system successfully passed all self-checks. All elements are in good cosmetic condition. Model Code T2 40 AA AASerial No. 525Firmware v6.10Boot v4.15 Additional parts Included: 1 x user manual4 x allen keys2 x jet removal tools1 x pair of Richmond needle-nosed pliers1 x tube of Dow Corning high vacuum grease, half-used1 x step cranked 14mm spanner1 x 127mm steel flange1 x large internal 6cm valve2 x 60ml syringes1 x 5ml syringe1 x plastic T-fork2 x O-rings Part No. KE9041 x O-rings Part No. KE16083 x O-rings Part No. BOF000761 x O-rings Part No. BOF001761 x O-rings Part No. BOF003147 x O-rings Part No. BOF000732 x target anvils Part No. KE23995 x seal assembly Part No. DRG027012 x hard cases for spares and tools

Manufacturer: Beckman Coulter Model: J-26S XP BioSafe Three-Phase Description: The J-26S X sets the  (more)standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times. Core features: - Processing six liters of digester output in less than 10 minutes. - Deliver a subcellular fraction at 82,000 x g - Run 24 microplates at once - Separate live cell populations with elutriation - Sterile filters prevent the escape of infectious material Specifications: Maximum speed: 26,000 rpm Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm). Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off Maximum capacity volume range: 1 - 6 L Refrigeration system: CFC-free, non-ozone depleting refrigerant Temperature range(s): 10°C - 40°C in 1 degree increments Weight: 290kg Dimensions (W x H x D): 71cm x 86cm x 86cm Power requirements: 220/380 VAC, 50 Hz, 3 phases Humidity restrictions:< 95% (non-condensing) Scope of delivery: - J-26S XP BioSafe Three-Phase without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we are happy to help! The unit is in absolute top condition and has been 100% function tested.

Foster Xtra XR 35 Blast Chillers Lab This item was removed from a university where it was surplus to (more) requirement. It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal. These items were previously used at a catering facility, so they do not require a decontamination procedure.