Scanna ScanMax 225 Mailroom Postal X-Ray Machine SMB225D2G20 Lab Faulty NOTE - THIS IS A SPARES/REPAIRS ITEM

Scanna ScanMax 225 Mail Room Security X-Ray Machine Model - SMB225D2G20 This was removed from a (more) university lab where it was surplus to requirements. The unit powered up but we were unable to get the monitor to communicate with the onboard PC. It was not tested further. It seems to have some power issues involving the onboard UPS. Therefore, it is listed as Spares/Repair. It is in good cosmetic condition with only minor marks from use. It has a manual included with it. Inside dimensions - D56.5 W42 H54cm

Digital CR Reader With Cassettes This item was removed from a university where it was surplus to req (more)uirement. The item is in good cosmetic condition. It powers on, we are unable to conduct further testing at our facility. The previous client has stated it was in working order prior to removal. No software is included. S/N: 3985

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Manufacturer: Novasina Model: Thermoconstanter TH-2 / RTD-33 P/N: 641 Description: The Novasina ther (more)moconstanter is an electric hygrometer, hymidity meter for aw measurements in the approximate range of microbial growth (0.50±0.97). It provides a convenient and reliable means of making aw measurements. Features: - a very high level of precision- stability of the calibration curve in the aw range studied (0.50±0.97)- adequate equilibration times- a reasonably short time for measurement of aw in various materials (from 10 to 30 minutes according to aw level)- a built-in temperature-controlled device for aw measurements in the temperature range 0°C±50°C Specifications: - Ranges: 0-100%; 0-50°C- Electrical: 220V 6A 50Hz- Output: 0...1V Items delivered: - Novasina Thermoconstanter TH-2 / RTD-33 Condition: The thermoconstanter is in perfect cosmetic as well as technical condition. It is 100% functional tested and ready to be operated.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LightCycler Nano Instrument – Real-time PCR amplification and detection instrument for tube-based as (more)says of up to 32 (4 x 8) samples per run, with minimal noise, footprint and weight. Assembled from just a few building blocks, the robust LightCycler Nano System is easy to transport and install. Up to 32 samples can be run in 0.2 ml tubes connected as strips. Fast heating and cooling is done using Peltier elements. Assay performance is supported further by a heated lid. Excitation is provided by high intensity LEDs filtered to provide light at 500 nm that is capable of exciting all fluorophores commonly used in qPCR. A prism is used to generate spectra from fluorescent emissions. These spectra are imaged using a CMOS camera. The LightCycler Nano Instrument is a 32-sample real-time PCR device for gene expression and genetic variation analyses in mono and dual color mode. Due to its small size, low weight and easy handling of reaction devices and software, this exceptionally silent instrument is ideal for scientists using real-time PCR for everyday use. The LightCycler Nano Instrument is designed for life science research only and not intended for use in diagnostic procedures.

A&D Weighing Apollo GX-124AE Analytical Balance, 120 g, 0.1 mg Capacity 120 g Readability 0.000 (more)1 g Repeatability 0.0001 g Features - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-124AE Analytical Balance ensures high-precision measurements with a capacity of 120 g and a readability of 0.0001 g. This balance features a fanless ionizer, standard in AE models, which effectively neutralizes static charges without physical contact, ensuring disturbance-free weighing. Additionally, it comes with an external IR sensor that facilitates precise and convenient measurements by enabling users to interact with the balance without direct contact, thus maintaining cleanliness and accuracy. Its Electronically Controlled Load (ECL) management allows for repeatability testing and automatic precision checks without the need for external weights, further enhancing the reliability of measurements. The balance is designed with a fast stabilization time of approximately 1.5 seconds, making it ideal for high-throughput environments where time and accuracy are paramount. This advanced analytical tool simplifies daily operations and compliance with USP41 standards by alerting users when sample sizes are below minimum weight, which minimizes waste and maximizes efficiency. The balance's impact shock detection and overload protection systems safeguard the unit from accidental damage, ensuring long-term reliability and consistent performance. Additionally, operational simplicity is achieved through six straightforward keys and a quick toggle function that allows seamless switching between USB and RS-232C communications, catering to various laboratory data management systems. Further enhancing its usability, the GX-124AE is equipped with an illuminated, front-mounted level for easy leveling even when wearing gloves, and it offers both automatic self-calibration and one-touch internal/external calibration to guarantee valid results. The balance's extensive range of measurement units and its ability to perform percent calculations and piece counting adds to its versatility, making it suitable for a wide range of scientific applications. With its robust design and advanced features, including the supplemental IR sensor, the A&D Weighing Apollo GX-124AE Analytical Balance is a superior choice for professionals seeking precise analytical capabilities. Backed by a five-year warranty, it delivers both quality and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-124AE Analytical Balance, 120 g, 0.1 mg includes: - Touchless IR Switch - IR Sensor - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty