Biomerieux 29551 PREVI Color GRAM

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Biomerieux 29551 PREVI Color GRAM Gram Coloration Staining Console with side reagent Tray In very g (more)ood condition

Thermo Scientific Compact LidPark P00155 This item was removed from a university where it was surplu (more)s to requirement. It is in very good cosmetic condition and powers up, we are unable to test it further at our facility. Model: LidPark P00155

Galileo GAHW-50 small Ultra-low freezer. Capacity 50 L. Temperature range from - 40 ℃ to - 86 ℃. Rap (more)id cooling. Danfoss compressor. 110 mm foam insulation. Microprocessor based temperature controller. LCD digital display. USB port. Password protected parameter settings. Audible and visual alarms of: high / low temperature, power failure, low battery, door open, and system failure. Stainless steel interior. Bolt. Double silicone gasket. Wheels. Low noise. Low consumption. CE marking. Optional: Chart Recorder, CO2 back up system, printer, RS232, RS485, remote alarm.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-41027ITEM-28378 SCIEX Equipment Piece ITEM-28376 Control System ITEM-28368 Consort E844 ITEM-28369 Consort E844 ITEM-28370 Consort E844 ITEM-28374 Alaris Infusion SystemITEM-28387 Nanospray Switch ModuleITEM-28381 Artesyn Power SMP/PF ITEM-28384 Coil ITEM-28383 Coil ITEM-28371 Stuart Turner Pump ITEM-28379 SCIEX Equipment Piece ITEM-28385 Vibration GeneratorITEM-28382 Unknown metal component ITEM-28084 Alaris Infusion System ITEM-28386 Plitron ComponentITEM-28375 Lambda Alpha 600W ITEM-27965 Elgameter Elgastat ITEM-28380 Coil C ITEM-28367 Graseby PCA Pump 3300 ITEM-27940 Glassware Stand ITEM-28086 Graseby PCA Pump 3300 ITEM-28085 Graseby PCA Pump 3300 ITEM-27955 Miscellaneous electrophoresis equipment ITEM-28372 Flowgen AccessoryITEM-28373 Durapipe Accessory ITEM-27960 4x system controllers ITEM-27966 Orion Star A111 pH Meter ITEM-27961 Miscellaneous pieces left over from ITEM-18980 ITEM-27964 Grant Water Bath Stirrer ITEM-27957 Biometra PS304 II ITEM-27959 Cuvettes 10x4x45mm ITEM-27956 Consort E143 ITEM-27946 8x boxes of 110x30 mm thermopaper ITEM-27947 Precision Microplate Reader ITEM-27945 Vickers Instruments Microscope in box ITEM-27958 Bag of Short clamps ITEM-27949 Microliter Syringe 100 µL REAGENT ITEM-27951 Microliter 100 µL Syringe ITEM-27954 Flowgen MH1070B ITEM-27952 Flowgen MH1070B ITEM-27953 Flowgen MH1070BITEM-27941 Plastic components ITEM-27942 Cobra Fara sample wheels & accessories ITEM-27943 500 Watt Auto TransformerITEM-27944 Vacuum Pump ITEM-27948 Grant LTD6G ITEM-27939 Box of 1.5 ml microtubes ITEM-27938 Mixed Lab GlassITEM-21723 VG Pirani UnitITEM-26098 Glassware

Syngene U:Genius 3 Gel Imaging System This was removed from a university lab where it was surplus to (more) requirements. It is in full working order. It is in excellent cosmetic condition with minor marks. Additional Items:Superfrost Microscope slide

Bioquell H202 Decontamination System Z-2 & R-10 This was removed from a university lab where it (more) was surplus to requirements. The lab confirmed they were fully working prior to removal. Included are the following; Bioquell Z-2Model no. TD068-0000-230VSN - 201104BZ21160(5L Container inside is empty)Hours run - 59A warning for calibration due came up, was due 14/07/23 Bioquell R-10Model no. TD060-5900-230VSN - 201106BR1253 Both units power on and are in good used cosmetic condition.

Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, (more) 115V Refrigerant R134A Operating Temperature Range Ambient +10-50°C Temperature Accuracy ±0.3°C Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention - Interior light for better sample visibility - Optional slide shaker table available to put in and take out samples easily Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Programmable. High accuracy temperature control and temperature distribution. Inner glass door keeps temperature stable during sample observation. Operating temperature range: -10~ + 50° CINCLUDED: The Yamato IN-604W-115V Refrigerated Incubator Programmable with Window & Shaker Power Hook Up 143L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato FO-300CR Muffle Furnace with Communication Port 7.5L, 115V Operating Temperature Range 100°C (more) to 1150°C Max. Temperature Reaching Time ~70 min. Internal Capacity 7.5L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 7.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-300CR Muffle Furnace with Communication Port 7.5L, 115V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.