MT 4 B-Medical-Systems transport container

Hettich 4615-A 2-drawer rolling cabinet Model: 4615A for centrifuges Swivel castors + two brakes - 2 (more) drawers with keys With mats in the bottom of the drawers One of the drawers is equipped with an adjustable divider Dimensions (W x H x D): 770 x 550 x 650 mm Equipped with swivel castors and two brakes. Compatible with the Rotina 420R and Rotanta 460R models

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

Easily accessible features - The special transport containers of B Medical Systems are made of polye (more)thylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light. - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates External dimensions W x D x H (mm): 550 x 475 x 499 Internal dimensions L x W x H (mm): 340 x 260 x 270 Insulation: 90-105mm Storage capacity (gross volume of bags): 15 (450ml) / 25 (270ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outside: up to 96.14h at 43°C outdoors: up to 56.5h Conforme a ADR, RID, IMDG, ICAO-TI, IATA-DGR, Dispositivo medico di classe IIa secondo MDD 93/42 / CEE

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - USB port - Electron (more)ics with easily accessible temperature display in the door handle - No sharp edges for easy hygiene control - Gasket heater that minimizes condensation - Easy data archiving - Anti-corrosion structure guaranteed for life Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Polypropylene structure with polyurethane foam that provides strong thermal insulation - Sealed gaskets that minimize the loss of cold air - Monobloc cabinet made with the exclusive rotational molding technique The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Cover for baskets of termodesinfectadora. Mesh of 1 mm with an opening of 8 mm, under 4 mm For baske (more)ts accessories Miele E 103, E 104, E 105 and E 139.

Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 6 x 7.5 cm Maximum Power  (more)Settings 300 V, 200 mA, 60 W Maximum Buffer Volume 325 ml Features - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Colored loading strips—for easy well detection when loading - Compact tank—reduces the buffer volume required to cover the gel, providing greater control over the voltage gradient and run-time - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit is a compact and efficient system tailored for routine nucleic acid preparatory and analytical electrophoresis. Designed for ease of use and consistent results, this unit can handle up to 32 samples per run, making it ideal for labs focused on high-throughput nucleic acid analysis. The SUB6 features a removable gel-casting tray with integrated silicone gaskets, allowing gels to be cast directly within the tank for a leak-proof setup. Equipped with color-coded, height-adjustable combs, the SUB6 enables easy comb thickness identification and precise control over well depth. The UV-transparent running tray allows users to image the gel without risking damage, while colored loading strips make well detection straightforward during sample loading. Its compact tank design reduces the buffer volume required, providing greater control over the voltage gradient and run time. Side handles ensure safe and easy transport around the lab, adding to the unit’s practical, user-friendly design. INCLUDED: The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Silicone Gasket* - 1 mm thick, 8-well combs, 2 pcs - Colored Loading Strips - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Ohaus 30314839 12 x 1.5/2.0ml Fixed Angle Rotor The Ohaus 30314839 12 x 1.5/2.0ml Fixed Angle Rotor  (more)accommodates a capacity of up to 12 x 1.5 / 2.0 ml. This rotor is designed for use with Ohaus FC5718, FC5718R, and FC5830R series centrifuges. The Ohaus 30314839 Fixed Angle Rotor reaches a maximum speed of 30,000 RPM and a maximum Relative Centrifugal Force of 65,395 x g. INCLUDED: The Ohaus 30314839 12 x 1.5/2.0ml Fixed Angle Rotor includes: - Ohaus 30314839 12 x 1.5/2.0ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

ATTENTION:We have available a wide variety of SIVERS LAB / IMA - PHILIPS Instruments for Microwave A (more)pplication in LAB or EDUSo interested buyers could combine instruments for various DEMO and/or EDU purposes we are selling here: one Precision Straight Waveguide Section      Model: PM 7366X Description: frequency range ..................... 8.0 GHz to 12.5 GHz instrument is in absolute LIKE NEW cosmetic condition and 100 % functional tested