Yamato SK-401-115V Natural Convection Dry Sterilizer 99L, 115V

Yamato SM-201 Sterilizer with Dryer 20L, 115V Operating Temperature Sterilization 105°C to 123°C Op (more)erating Temperature Drying 150 to 180°C Internal Capacity 20L Features - Automatic operations from sterilization to drying carried out with an interactive key input system - Quick sample drying capability makes samples ready to use right after sterilization - Drying temperature can be set according to sample material, quantity, etc. - Timer range from 1~999 hours - Drain bottle water level can be quickly confirmed on the front panel level indicator - Drain valve located in front for easy access - Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy - Self-diagnostic functions make operation safer and error recovery quicker - Condensation collector neutralizes high temperature exhaust steam safely High performance, fully automatic 20L standard steam sterilization from start to finish with high pressure steam sterilization and drying steps. Automatic operations from sterilization to drying carried out with an interactive key input system. Quick sample drying capability makes samples ready to use right after sterilization. Drying temperature can be set according to sample material, quantity, etc. Timer range from 1~999 hours. Drain bottle water level can be quickly confirmed on the front panel level indicator. Drain valve located in front for easy access. Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy. Self-diagnostic functions make operation safer and error recovery quicker. Condensation collector neutralizes high temperature exhaust steam safely. Sterilizing temp. range 105 to 123°C. Drying temp range 150 to 180°C. INCLUDED: The Yamato SM-201 Sterilizer with Dryer 20L, 115V includes: - 2 pcs. stainless steel mesh basket - Drain board, drain bottle, condensation collection container with magnetic bracket - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V Internal Capacity 162L Temperature R (more)ange Ambient +5-260°C Temperature Accuracy ±1°C (at 260°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Programmable natural convection 162L dry heat sterilizer with independent overheat prevention device. High precision controller with improved display visibility and operability. Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information. Maximum 99 steps, 99 patterns, repeat operation. Easy sample data collection with cable port. Temp setting range ambient +5~260°C..INCLUDED: The Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tuttnauer 3870EAP Digital Autoclave, 230V Chamber Volume 85L Sterilization Temperature Range 105°C  (more)to 137°C Chamber Dimensions 15 x 27 in. (38.1 x 68.58 cm) Features - Designed to autoclave wrapped, unwrapped, glass and tools. - Not suitable for liquids - Sterilization time up to 99 minutes - Temperature selection from 105°C to 137°C - Includes trays - EAP Models allow closed door drying - In-line particle filter to protect valves - Electronic pressure and temperature sensors - Low Water Alarm - sounds when reservoir needs to be refilled - Standby Heating - keeps chamber warm for quicker cycles - Built-In Printer - Provides a printed summary at the end of each cycle, documenting temperature, elapsed sterilization and drying time, selected cycle number, real time and date, as well as any errors or interruptions that may occur during the cycle - Chamber Volume – 85L - Power – 230V, 1 Phase (60Hz) NEMA 6-15 The Tuttnauer 3870EAP Digital Autoclave, 230V is designed with superior productivity in mind, offering monitoring, recovery, standard printing and a wide range of programmable and customizable options for large capacity operation. An easy-to-use, single touch control system increases productivity and rapid cycles optimize availability of ready-to-use sterile instruments. A closed door active drying system is featured to maintain sterility and ensure efficient drying of packs and pouches. The long-life electro polished chamber and door are also made to last. Click Here to View Product Video INCLUDED: The Tuttnauer 3870EAP Digital Autoclave, 230V includes: - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Tuttnauer 1730M Autoclave The Tuttnauer 1730M Autoclave is designed to compliment any healthcare fac (more)ility. The bright new easy-to-use panel was designed with the operator in mind. The 1730M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. INCLUDED: The Tuttnauer 1730M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Critically, UV treatment does not affect the organoleptic properties of water and other liquids, pro (more)viding high rates of disinfection without any changes to taste, PH, texture and odour.

This Applikon My-Control Z310210011 Bioreactor Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use.

Clearbridge BioMedics ClearCell FX Cell Retrieval System This was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up but is showing various historic faults from when it had been run previously. The client informed us it had a fault but were unable to confirm exactly what. It is in good cosmetic condition with minor marks. There are 2 x 50ml tubes fitted, a CTChip FR1S & bottle holder included.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

IKA Oven 125 Basic Drying Oven w/ Glass Door Heat Output 1500 W Working Temperature room temp. +5  (more)- 250 °C Operating Area Inner chamber 550 x 525 x 450 mm Features - Temperature range: RT + 5°C to 250°C - Capacity: 125 l - Electronically adjustable ventilation - Clear display and control menu - Key lock function - Timer - Adjustable temperature limit - Glass Door Universal oven for tempering, drying, aging and heating application in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools / universities, research, quality control and science. Fast heat up times and a precise temperature control guarantee reproducible test results. A special odorless insulation also ensures lower operating costs. The oven can be controlled by USB and test parameters can be recorded for further analyses. INCLUDED: The IKA Oven 125 Basic Drying Oven w/ Glass Door includes: - IKA Oven 125 basic dry - glass - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Basic Drying Oven w/ Glass Door Specifications Heat output1500 WWorking temperatureroom temp. +5 - 250 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer display7 segment LEDTime setting range1 - 144000 minNumber of trays max. 6Load for one tray max. 30 kgOperating area inner chamber 550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight81 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20USB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1550 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(3) { background-color: #fffacd; }