Tuttnauer 2840ELV Mobile Lab Line Vertical Autoclave

Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V Internal Capacity 300L Temperature Range A (more)mbient +10-210°C Temperature Accuracy ±1°C (at 210°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Programmable forcedl convection 300L dry heat sterilizer with independent overheat prevention device. High precision controller with improved display visibility and operability. Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information. Maximum 99 steps, 99 patterns, repeat operation. Easy sample data collection with cable port. Temp setting range ambient +10~210°C.INCLUDED: The Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V Internal Capacity 162L Temperature R (more)ange Ambient +5-260°C Temperature Accuracy ±1°C (at 260°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Programmable natural convection 162L dry heat sterilizer with independent overheat prevention device. High precision controller with improved display visibility and operability. Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information. Maximum 99 steps, 99 patterns, repeat operation. Easy sample data collection with cable port. Temp setting range ambient +5~260°C..INCLUDED: The Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tuttnauer 2840ELCPVGP Lab Line Standing Autoclave Features - Take Advantage of Tuttnauer’s state-of- (more)the-art advanced control system with multi-color display - Intuitive Multi-color display for easier reading gives quick access to important information. Color is used to indicate the stage of the cycle - Safe Automatic pressure locking system. Door will not open when the chamber is over pressured - 316L grade high quality stainless steel chamber and door with electro-polish finish - Connect to a local network for use with RPCR Software for remote monitoring of up to 8 autoclaves - The 2840EL-D autoclave comes with 8 factory set cycle programs that cover the diverse processing needs of most laboratories and research centers - internal printer allows for the printing of Documents date, time, temperature and pressure Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316L grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 2840EL is a front loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. The 2840EL autoclave comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers. This unit features fast cooling (up to 75%) in which water circulation is done through cooling pipes that cools the chamber. Additionally the complete drying feature utilizes steam from the generator in combination with vacuum for complete drying. This model features a printer. INCLUDED: The Tuttnauer 2840ELCPVGP Lab Line Standing Autoclave includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Tuttnauer 023212007 Autoclave Printer for 2340E, 2540E & 3870E The Tuttnauer 023212007 Autoclave (more) Printer is specifically designed for use with the Tuttnauer 2340E, 2540E, and 3870E Autoclave models. This reliable printer provides accurate and detailed documentation of sterilization cycles. Please Note: This printer replaces the discontinued 023212005 printer model shown in the second image and must use the 023212201 printer paper. INCLUDED: The Tuttnauer 023212007 Autoclave Printer for 2340E, 2540E & 3870E includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V Chamber Volume 5 (more)0L Sterilization Temperature Range 105C to 135C Chamber Dimensions 11.8" x 28" (30 cm x 71 cm) Features - Space-saving design with lid opening upward. - Fully automatic drying cycle for solid loads uses heat and vacuum for faster and more efficient drying. - Lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or when the temperature exceeds 97°C. - Pre-vacuum cycle - vacuum pump removes air from the chamber when sterilizing solids such as glassware and pipette tips, thereby eliminating cold spots, and ensuring faster and more efficient sterilization. - One-touch lever to easily open and close chamber lid. - Liquid cycle for media and agar. - Process display shows the program progress selected and status of the sterilization cycle. - Cycle for wastes and glassware without drying. - Bacteria filter reduces re-contamination. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. The HVP-50 Autoclave (with a 50-L chamber) is a self-contained, portable floor model mounted on casters. It occupies minimum floor space, operates at 120V, and can fit conveniently into many locations in the laboratory. Its many uses include the sterilization and drying of glassware, pipette tips, lab coats, wastes and also liquids such as agar and media. The HVP-50 can accommodate a 10-L fermenter, a 15-L carboy, a 19” x 24” biohazard bag, six 1-L flasks, twenty-one 500-mL bottles, 180 x 20-mm test tubes in two stacked baskets, or 270 x 13-mm tubes in three stacked baskets.INCLUDED: The Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The Tuttnauer EHS line of autoclaves uses a steam generator for direct injection of steam into the c (more)hamber which is essential for the high speed performance. A silent water ring pump is an inherent part of the fractionated pre-vacuum and post-vacuum in the drying stage. A water connection is required for operation of the unit.

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included) Not sure which agitator to choose? Download the Open Air Agitator Selection Guide to get a quick overview of all available models.

VACUUBRAND VACUU-Select, VACUU-VIEW, VSP 3000, and KF DN 16 Package for Fine Vacuum Control Upper Me (more)asuring Limit 825 torr Lower Measuring Limit 1 x 10-3 torr Accuracy +/- 15% of indicated value in the range 0.01-5 mbar/hPa/torr Features - Complete package for vacuum control of all fine vacuum applications in chemical labs, with continuous control range from atmosphere to fine vacuum (10-3 mbar) - Application editor allows easy customization - Graphic user interface for simple operation - Predefined applications for quick, reproducible results and application editor for easy customization - Rugged VACUU·VIEW extended gauge with wide measuring range offers superior chemical resistance and mechanical robustness The VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work down to 10-3 mbar. These packages include the VACUU·SELECT controller with fine vacuum gauge, a chemical-resistant inline isolation valve (VV-B 15C), and the accessories required for connection to your vacuum system via small flange (KF) connections. VACUUBRAND offers fine vacuum control packages with two different small flange connections. The KF DN 16 fine vacuum control package is compatible with our rotary vane pump models RE / RZ 2.5 to RE / RZ 6 and our HYBRID pump RC 6. The KF DN 25 fine vacuum control package is configured for use with our RE / RZ 9 rotary vane pumps and VACUU·PURE screw pumps. With its intuitive, application-based user interface, the controller allows you to quickly get your fine vacuum process under control. For advanced processes, pre-defined applications can be modified, and new applications can be created to optimize your process conditions. The included inline solenoid valve and sensor are automatically configured via the proprietary VACUU·BUS system.INCLUDED: The VACUUBRAND VACUU-Select, VACUU-VIEW, VSP 3000, and KF DN 16 Package for Fine Vacuum Control includes: - Vacuum controller VACUU·SELECT (without internal vacuum sensor and venting valve) with with VACUU·VIEW extended and power supply - Solenoid valve VV-B 15C KF DN 16 - T-piece KF DN 16 - Hose nozzle DN 10 mm (PP) - Clamping and sealing rings - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MS-PB Analog Circular Magnetic StirrerThe Scilogex MS-PB Analog Circular Magnetic Stirrer i (more)s an economy stirrer for basic stirring applications. The MS-PB features an electronic speed control for constant speed even during changes in load, high magnetic adhesion, and a long life DC motor. It is not recommended for any corrosive liquid mixing as the plate is made of ABS plastic. Click Here to View Product Video INCLUDED: The Scilogex MS-PB Analog Circular Magnetic Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex 24 x 1.5/2ml Plastic Rotor Kit with LidThe Scilogex 24 x 1.5/2ml Plastic Rotor Kit with Lid (more) accommodates 24 x 1.5/2ml centrifuge tubes and reaches a maximum speed of 14,000RPM. For use with DM1424 Hematocrit Centrifuge. Kit includes lid, fixing clips, and O'ring. INCLUDED: The Scilogex 24 x 1.5/2ml Plastic Rotor Kit with Lid includes: - Fixing Clips - O-Ring - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN816.1.2KT.45P IP20-T Diaphragm Pump Ultimate Vacuum 160 mbar (abs.) Maximum Flow Rate 30L/min (more) (1.8 m3/h) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Compact, quiet and reliable - Can handle wet vapors without damage - Maintenance-free TheKNF UN816.1.2KT.45P IP20-T Diaphragm Pump is a single-head, dry-running device used in a wide range oflaboratory applications. They transfer, compress and pump down withoutcontamination. The heart of these very compact pumps is a KNF structureddiaphragm. This patented diaphragm was stress-optimized using the FiniteElements method. As a result, KNF was able to make the pump smaller whileincreasing the service life of the diaphragm. This pump is 115V. INCLUDED: The KNF UN816.1.2KT.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty