Tuttnauer 2840ELCPVGP Lab Line Autoclave

Astell AMA260BT Autoclave Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition but does not power on, therefore we are unable to conduct further testing, and it is listed as Spares/Repair. This item was manual opened to photograph the interior, there is currently no plug fitted. The previous client has confirmed that it is not in working order. Model- AMA260BTS/N- CLBN52652

This autoclave was removed from a university lab as surplus to requirements. We were assured the uni (more)t was in good working order when last used, but was no longer required by the lab. At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used. Type:B-QCS-54260To:BS.2646Capacity:200Maxpressure:25Serial No:2845Date:9-1-06Litres:2006Test Pressure:394Max Filling mass:100kgIntended use:SteriliseProduct group:2Design temp:150 degrees cMax Temp: 138 degrees cMin Temp: N/AVoltage: V00 50/60 8KW

Tuttnauer 3870EAP Digital Autoclave, 230V Chamber Volume 85L Sterilization Temperature Range 105°C  (more)to 137°C Chamber Dimensions 15 x 27 in. (38.1 x 68.58 cm) Features - Designed to autoclave wrapped, unwrapped, glass and tools. - Not suitable for liquids - Sterilization time up to 99 minutes - Temperature selection from 105°C to 137°C - Includes trays - EAP Models allow closed door drying - In-line particle filter to protect valves - Electronic pressure and temperature sensors - Low Water Alarm - sounds when reservoir needs to be refilled - Standby Heating - keeps chamber warm for quicker cycles - Built-In Printer - Provides a printed summary at the end of each cycle, documenting temperature, elapsed sterilization and drying time, selected cycle number, real time and date, as well as any errors or interruptions that may occur during the cycle - Chamber Volume – 85L - Power – 230V, 1 Phase (60Hz) NEMA 6-15 The Tuttnauer 3870EAP Digital Autoclave, 230V is designed with superior productivity in mind, offering monitoring, recovery, standard printing and a wide range of programmable and customizable options for large capacity operation. An easy-to-use, single touch control system increases productivity and rapid cycles optimize availability of ready-to-use sterile instruments. A closed door active drying system is featured to maintain sterility and ensure efficient drying of packs and pouches. The long-life electro polished chamber and door are also made to last. Click Here to View Product Video INCLUDED: The Tuttnauer 3870EAP Digital Autoclave, 230V includes: - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Tuttnauer 2840ELV Mobile Lab Line Vertical Autoclave Features - Take Advantage of Tuttnauer’s state- (more)of-the-art advanced control system with multi-color display - Intuitive Multi-color display for easier reading gives quick access to important information. Color is used to indicate the stage of the cycle - Safe Automatic pressure locking system. Door will not open when the chamber is over pressured - 316L grade high quality stainless steel chamber and door with electro-polish finish - The 2840EL-D autoclave comes with 8 factory set cycle programs that cover the diverse processing needs of most laboratories and research centers - Connect to a local network for use with RPCR Software for remote monitoring of up to 8 autoclaves - internal printer allows for the printing of Documents date, time, temperature and pressure Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316L grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning The Tuttnauer vertical, top loading laboratory autoclave is available in chamber sizes from 23 to 165 liters. With higher capacity and better performance, Tuttnauer's ELV Laboratory line of fully automatic vertical steam sterilizers provides safe, economical and effective sterilization. The ELV models have an advanced microprocessor based control panel. The various applications can be carried out using the autoclave’s standard programs such as: Liquids such as nutrient media and buffer solutions, solid items, glassware and plastic, and waste sterilization. The autoclave automatically switches to standby mode if no buttons or switches are operated for four hours. Drain protection includes: exhaust drain is mixed with cold tap water that cools the exhaust’s temperature before reaching the drain. Features: - 23 to 160 Liter autoclave chamber volumes - Sterilizes liquids, solids, glassware and biohazard - Advanced microprocessor control panel - Independent temperature and pressure monitoring - Chamber constructed of 316Ti grade stainless steel - Accelerated cooling technology reduces cycle time INCLUDED: The Tuttnauer 2840ELV Mobile Lab Line Vertical Autoclave includes: - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 100-1000ul Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 0.60/0.70/2.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V Chamber Volume (more) 76L Sterilization Temperature Range 105ºC to 135ºC Chamber Dimensions 14.3 x 28.7 in(36.4 x 73.0 cm) Features - Automatic Lid Opening and Closing Button replaces a foot pedal. - Safety Interlock senses pressure and temperature and prevents lid from opening during a cycle, when the chamber is pressurized, and when the high temperature can cause boil over. - Programmable Auto-Start for running a cycle from 1 to 99 hours later and time for air removal before sterilization. - Large (15 liters) / Efficient Steam Condenser ensures no steam exhausts into the lab. The HG-113 and HG-133 incorporate a radiator for this. - Over-Flow Lamp indicates that the drain bottle is full and ready to be emptied. - Built-in Cooling Fan for faster post-sterilization cooling and shorter completion time. - Selectable Rate of steam venting after sterilization. - Twelve Programs Cycles can be stored. - Large Control and Display Panel improves functionality and shows the progress of the sterilization cycle. The Hirayama HICLAVE HG-80 is an advanced 85L floor-standing autoclave designed for efficient and safe sterilization. It features an automatic lid opening button to replace the conventional foot pedal and an automatic lid closing button for convenience. Its safety interlock prevents the lid from opening during cycles, ensuring safety when the chamber is pressurized or at high temperatures. The programmable auto-start can delay the start of a cycle by 1 to 99 hours. A large and efficient 15-liter steam condenser prevents steam from exhausting into the lab, complemented by a built-in cooling fan for rapid post-sterilization cooling. Users can select the rate of steam venting post-sterilization and program the air removal time before sterilization begins. Up to twelve program cycles can be stored for easy recall.The HG-80 boasts a large control and display panel, enhancing functionality and cycle progress visibility. Specifications include a chamber size of 76 liters (14.3" x 28.7"), a temperature range of 105°C to 135°C, a sterilization timer from 1 to 300 minutes, and an agar warming range maintainable from 45°C to 60°C for up to 24 hours to prevent coagulation. Additional features include a programmable air removal timer, selectable steam venting rates, and customizable temperature settings for lid interlock release for increased safety and flexibility. The unit is equipped with comprehensive safety features, including a circuit breaker with GFCI, low-water power cut-off, over-temp power cut-off, over-pressure power cut-off, safety valve, and a sensor for improper lid closing. The autoclave comes with a 15-liter water tank for the steam condenser and a 2-liter drain water bottle. It operates on 208/220/240V, 50/60 Hz, single-phase power, with a consumption of 3.8 kW, and ships at a weight of 255 lb (116 kg).INCLUDED: The Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BENCHMARK D1000-E Homogenizer, Includes 5mm and 7mm Generators Brand new in original packaging Part  (more)number: D1000 E With 5mm and 7mm generators (ideal for microtubes) For volumes from 100µl to 250ml Speed ​​range: 8500 to 30000rpm Capacity: 0.1 to 250ml Noise level: <70dB Operating temp. Range: +4° to 65°C Dimensions: 1.9 x 2.3 x 9 in / 4.5 x 5.8 x 22.5 cm Weight: 1.35 lb / 0.62 kg Electrical: 230V 50Hz

Thermo Scientific LTQ Orbitrap Velos with ETD Mass Spectrometer This was removed from a university  (more)lab where it was surplus to requirements. The university said it hadn't worked properly for some time, and on inspection, it had been slightly stripped for parts. We did not power it up to avoid damage to the unit. It is in otherwise good cosmetic condition with marks from use.

MARSHALL Select MS-PA10UL Autoclavable Pipette, 0.5-10ul Volume Range 0.5 to 10ul Adjustable or Fix (more)ed Volume Adjustable Pipette Type Manual Air Displacement Features - Ergonomic design with a light touch plunger and relaxed finger rest reduces user fatigue - Fully autoclavable, allowing for easy sterilization - Constructed from high-quality, heat-resistant materials for durability - UV and chemical resistant to withstand harsh laboratory conditions - Centrally located digital display facilitates ambidextrous use - Quick-release pipette tip ejector simplifies tip changes - Volume lock prevents accidental volume adjustments - Compatible with universal pipette tips for versatility - Suitable for both forward and reverse pipetting techniques - Ideal for handling both low and high-viscosity liquids, enhancing versatility in laboratory procedures The MARSHALL Select MS-PA10UL Autoclavable Pipette is a high-performance, manual air displacement pipette designed for precision and comfort in laboratory applications. This pipette offers an adjustable volume range from 0.5 to 10ul with precise 0.1ul increments, ensuring accurate measurements. It features an ergonomic design with a light touch plunger and relaxed finger rest, which minimizes user fatigue and enhances comfort during extended use. Constructed from high-quality, heat-resistant materials, the MS-PA10UL is fully autoclavable, providing excellent protection against UV light and chemicals, ensuring durability and reliability in harsh laboratory environments. The design includes a centrally located digital display for easy viewing by both left- and right-handed users, enhancing its ambidextrous usability. Additional features include a rotating counter knob for quick volume setting, a quick-release pipette tip ejector for convenient tip changes, and a volume lock to prevent accidental adjustments. This pipette is compatible with universal pipette tips and is suitable for both forward and reverse pipetting techniques, making it versatile for handling low-viscosity liquids as well as more challenging higher-viscosity or foamy samples. The MS-PA10UL is the ideal choice for laboratories seeking a reliable, easy-to-use pipette that meets rigorous standards, including ISO 9001:2008 and ISO 13485:2003 certifications, along with CE marking. INCLUDED: The MARSHALL Select MS-PA10UL Autoclavable Pipette, 0.5-10ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

High Capacity HRP Platform Wherever high readability and precision are important. Wherever good repe (more)atability in harsh industrial conditions matters. High Capacity HRP Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others High Capacity HRP Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable High Capacity HRP Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. High Capacity HRP Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential High Capacity HRP Platforms work with one of two weighing terminals: PUE 7.1 or PUE HY10. The terminals&rsquo; software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.