Scilogex MicroPette Plus Autoclavable Pipettor, 5-50ul

Priorclave PS/QCS/EV150 Top Loading Autoclave This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up but has a main board fault. It is sold for spares/repairs.

Priorclave PS/QCS/SV100 Top Loading Autoclave This was removed from a university lab where it was s (more)urpus to requirements. The unit powers up but has only been partially tested as it requires a steam generator, which we do not have. It is in good cosmetic condition with minor marks.

This autoclave was removed from a university lab as surplus to requirements. We were assured the uni (more)t was in good working order when last used, but was no longer required by the lab. At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used. Type:B-QCS-54260To:BS.2646Capacity:200Maxpressure:25Serial No:2845Date:9-1-06Litres:2006Test Pressure:394Max Filling mass:100kgIntended use:SteriliseProduct group:2Design temp:150 degrees cMax Temp: 138 degrees cMin Temp: N/AVoltage: V00 50/60 8KW

Selecta Mediclave 12 benchtop autoclave. Indicated for the sterilization of solids and liquids. Capa (more)city 12 liters. Steam sterilization. Temperature range from 121 to 134ºC; pressure 1 to 2 bar; automatic air evacuation, devaporization valve and safety thermostat. Stainless steel. Includes basket with diameter 22.5 cm and height 24 cm. Exterior dimensions (LFA): 50*35*80 cm: 18 kg. User manual. The JP Selecta Mediclave autoclave is a high quality and reliable sterilization equipment. Designed for use in laboratories and medical centers, this autoclave has a capacity of 12 liters and a maximum sterilization temperature of 134 degrees Celsius. With its intuitive and easy-to-use control panel, this autoclave offers a wide range of sterilization programs to suit different needs. In addition, its security system guarantees safe and efficient operation. With the JP Selecta Mediclave autoclave, you can be sure of accurate and consistent sterilization results.

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 100-1000ul Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 0.60/0.70/2.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 50-300μlThe MicroPette Plus pipettes are  (more)fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 50-300μl includes: - Two Year Manufacturer's Warranty

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 200 Advance is the ideal solution for demanding applications operating with viscosities up to 100,000 mPa. The electronically controlled brushless motor of the OHS 200 Advance agitates up to 100 l (H2O) with a maximum torque of 200 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

Eurotherm Process Automation System with TCS Tactician T1000 & Components This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition though the access panel of the switchboard has snapped all its hinges. These will need replacing to secure the unit. We were unable to power the unit or the TCS Tactician T1000 Controller It was not tested further. The cabinet is filled with electrical components.

This Pfeiffer Vacuum  Model - TMU 262 Turbomolecular Pump was removed from a university lab whe (more)re it was surplus to requirements. The unit has not been tested but is in good cosmetic condition with minor marks from use.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Ohaus 30130872 30 x 1.5/2.0ml Fixed Angle Rotor The Ohaus 30130872 30 x 1.5/2.0ml Fixed Angle Rotor  (more)accommodates a capacity of up to 30 x 1.5 / 2.0 ml. This rotor is designed for use with Ohaus FC5515, and FC5515R series centrifuges. The Ohaus 30130872 Fixed Angle Rotor reaches a maximum speed of 13,500 RPM and a maximum Relative Centrifugal Force of 19,150 x g. INCLUDED: The Ohaus 30130872 30 x 1.5/2.0ml Fixed Angle Rotor includes: - Ohaus 30130872 30 x 1.5/2.0ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty