Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V

Tuttnauer 3950V Lab Line Vertical Autoclave, 220-240V Chamber Volume 60L Sterilization Temperature  (more)Range 121°C to 134°C Chamber Dimensions 15.3 x 19.9 in. (38.9 x 50.5 cm) Features - Designed to autoclave everything in your lab, including liquids, plastic, glass, sealed bottles, and bioreactors - No need to connect to building utilities, includes built-in reservoir - Built-in condensation reservoir - Two integrated temperature probes for complete sterilization of liquids - User-friendly touch screen control panel - 3 Year Manufacturer's Warranty

Tuttnauer 2340M AutoclaveFeatures - Automatic shut off at the end of both the sterilization and dry (more) cycles. - A long life electro polished Stainless Steel chamber and door. - Double safety locking device prevents door from opening while chamber is pressurized. - Drain valve is located on the front, allowing for quick and easy draining of water reservoir. - Dual safety thermostat to protect against overheating. - International certifications. - 1 year parts and labor warranty. 10 year chamber warranty With the operator in mind, the colorful control panel is both intuitive and easy to use. Control panel includes a pressure gauge, timer, thermostat, and function selector. Tuttnauer manual autoclaves will compliment any healthcare facility and satisfy all of your sterilization needs. With a small foot print of only 545 x 510 x 365mm this autoclave is both efficient and compact. The internal chamber has a volume of 5 gallons (19 liters) and can fit three stainless steel trays. The long-life elecro polished chamber and door are made to last. The Tuttnauer 2340M Autoclave is designed to compliment any healthcare facility. The bright new easy-to-use panel was designed with the operator in mind. The 2340M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 13 min., Cold Start 27 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2340M Autoclave includes: - 3 Stainless Steel Trays - Tray Holder - Base Plate - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 10-100ul Volume Range 10-100ul Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 0.80/1.00/3.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 10-100ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V Chamber Volume 50L Sterilizat (more)ion Temperature Range 105°C to 135°C Chamber Dimensions 11.8 x 28 in. (30 x 71 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V is a self-contained, portable, floor model mounted on casters. It does not need plumbing for installation, it occupies minimum floor space, operates at 120V, and can be placed conveniently in many locations in the laboratory. Its uses include the sterilization of agar, media, waste, and glassware. The HVE-50 can accommodate a 10-liter fermenter, a 15-liter carboy a 19” x 24” biohazard bag, nine 1-liter flasks, one hundred and eighty 20-mm tubes, or two hundred and seventy 13- mm tubes in three stacking baskets. INCLUDED: The Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HV-50 Floor-Standing Autoclave, 50L, 120V Chamber Volume 50L Sterilization Temperat (more)ure Range 105°C to 135°C Chamber Dimensions 11.8" x 28.0" (30 cm x 71 cm) Features - Space-saving design with lid opening upward. - Programmable auto-start for initiating a cycle up to 1 week later. - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. - Automatic air purging by a microprocessor prevents over-pressurization during a cycle. - One-touch lever to easily open and close chamber lid. - Programmable rate of steam exhaust. - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models.INCLUDED: The Hirayama HICLAVE HV-50 Floor-Standing Autoclave, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

The autoclave is suited as a universal autoclave for demanding sterilization tasks. The autoclave is (more) intended for use in  the medical field, e.g. in general physician and dental practices. The autoclave is not approved for the sterilization of liquids. Programs Universal: 134°C, 2 bar, 5.5 minutes Quick program B: 134°C, 2 bar, 3.5 minutes Quick program S: 134°C, 2 bar, 3.5 minutes Gentle program: 121°C, 1 bar, 20.5 minutes Prion program: 134°C, 2 bar, 20.5 minutes Chamber dimensions (⌀xD): 250 x 350 mm Capacity: 18 L

Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60HzDesigned to provide (more) low-cost pumping and heating for closed-loop applications, it connects directly to your own tank or system and provides accurate control within a frequently used temperature range. This Recirculator is ideal for applications such as thawing plasma, tempering photographic solutions, or circulating to an external device. Features Low-cost pumping and heating for closed-loop applications Provides accurate control within a frequently used temperature range Ideal for applications such as thawing plasma, temperating photographic solutions or circulating to an external device The Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60Hz is brand-new and ready for immediate shipment. Includes: Power Cord Operator's GuideManufacturer's Documentation Full 2 Year Parts and Labor Warranty Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60Hz Specifications Polyscience 210 Heated Recirculator Series Specifications Working Temperature Range °F Ambient to 158° Working Temperature Range C Ambient to 70° Temperature Stability °F ±0.4° Temperature Stability C ±0.2° Pump Type Centrifugal Pump Speed Single Process Connections 1/2" barb fitting Over-Temperature Protection / Failsafe Heater Control Yes Low Liquid Level Protection Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature C 35° Overall Dimensions (L x W x H) (inches) 8 x 9.5 x 8 in Overall Dimensions (L x W x H) (cm) 20.3 x 24.1 x 20.3 cm Shipping Weight (pounds) 12.0 Shipping Weight (kilograms) 5.4 Catalog Page Number 67 60 Hz Only Part Number 040300 Maximum Pressure (psi) 2.0 Maximum Pressure (bar) 0.13 Maximum Pressure Flow Rate (gpm) 3.00 Maximum Pressure Flow Rate (l/min) 11.4 Included Hardware Tubing and clamps Heater Wattage 750

IKA DB 4.6 Round Bottom Tubes Dry Block (20 mm)

220-240V