Hirayama HICLAVE HV-50 Floor-Standing Autoclave, 50L, 120V

Tuttnauer 3870M Manual Analog AutoclaveFeatures - Designed to autoclave glass, wrapped, and unwrappe (more)d tools - 60 minute cycle timer - Temperature selection from 100°C to 134°C (212°F to 273°F) - Combination pressure and temperature gauge - Double safety locking device prevents door from opening while chamber is pressurized - Valve is conveniently located at the front to allow quick and easy reservoir drainage - The dual safety thermostat and automatic shut-off deliver reliable protection from overheating - The long-life electro polished chamber and door are made to last With the capacity to meet the most demanding offices, the Tuttnauer 3870M Manual Analog Autoclave accommodates longer instruments or many small instruments. The low maintenance manual autoclave is the ideal choice that fits all your needs. The Tuttnauer 3870M Manual Analog Autoclave has a chamber size with a diameter of 15 inches and a depth of 27 inches. INCLUDED: The Tuttnauer 3870M Manual Analog Autoclave includes: - 2 Stainless Steel Trays - Autoclave Stand - Boost Transformer for 208V to 230V - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Tuttnauer 3870EAP Digital Autoclave, 230V Chamber Volume 85L Sterilization Temperature Range 105°C  (more)to 137°C Chamber Dimensions 15 x 27 in. (38.1 x 68.58 cm) Features - Designed to autoclave wrapped, unwrapped, glass and tools. - Not suitable for liquids - Sterilization time up to 99 minutes - Temperature selection from 105°C to 137°C - Includes trays - EAP Models allow closed door drying - In-line particle filter to protect valves - Electronic pressure and temperature sensors - Low Water Alarm - sounds when reservoir needs to be refilled - Standby Heating - keeps chamber warm for quicker cycles - Built-In Printer - Provides a printed summary at the end of each cycle, documenting temperature, elapsed sterilization and drying time, selected cycle number, real time and date, as well as any errors or interruptions that may occur during the cycle - Chamber Volume – 85L - Power – 230V, 1 Phase (60Hz) NEMA 6-15 The Tuttnauer 3870EAP Digital Autoclave, 230V is designed with superior productivity in mind, offering monitoring, recovery, standard printing and a wide range of programmable and customizable options for large capacity operation. An easy-to-use, single touch control system increases productivity and rapid cycles optimize availability of ready-to-use sterile instruments. A closed door active drying system is featured to maintain sterility and ensure efficient drying of packs and pouches. The long-life electro polished chamber and door are also made to last. Click Here to View Product Video INCLUDED: The Tuttnauer 3870EAP Digital Autoclave, 230V includes: - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Tuttnauer 3850EP Digital Autoclave, 230V Chamber Volume 65L Sterilization Temperature Range 105°C t (more)o 137°C Chamber Dimensions 15 x 20 in. (38.1 x 50.8 cm) Features - Designed to autoclave wrapped, unwrapped, glass and tools. - Not suitable for liquids - Sterilization time up to 99 minutes - Temperature selection from 105°C to 137°C - Includes trays - In-line particle filter to protect valves - Electronic pressure and temperature sensors - Low Water Alarm - sounds when reservoir needs to be refilled - Standby Heating - keeps chamber warm for quicker cycles - Built-In Printer - Provides a printed summary at the end of each cycle, documenting temperature, elapsed sterilization and drying time, selected cycle number, real time and date, as well as any errors or interruptions that may occur during the cycle - Chamber Volume – 65L - Power – 230V, 1 Phase (60Hz) NEMA 6-15 The Tuttnauer 3850EP Digital Autoclave, 230V is designed with superior productivity in mind, offering monitoring, recovery, standard printing and a wide range of programmable and customizable options for large capacity operation. An easy-to-use, single touch control system increases productivity and rapid cycles optimize availability of ready-to-use sterile instruments. The long-life electro polished chamber and door are also made to last. Click Here to View Product Video INCLUDED: The Tuttnauer 3850EP Digital Autoclave, 230V includes: - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle Chamber Volume (more) 3850ELP 65L Sterilization Temperature Range 105°C to 138°C Chamber Dimensions Hei-Clean 21.7 x 23.6 x 19.7 in. Features - Efficiently cleans and dries various labware including beakers, bottles, flasks, and test tubes - HEPA-filtered forced air drying for thorough sanitization - 20 preset programs with capacity for 20 custom cycles - User-friendly color touch screen for easy operation and control - Lower spindle rack with 25 positions and 10 glassware holders - Purified water rinse and built-in water softener - Spray arm and conductivity monitoring - No plumbing required for autoclave operation - 65L chamber volume for large batch sterilization - The 3850ELP Recycles water for efficient operation Introducing the Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle—your comprehensive solution for laboratory sanitation and sterilization. The Hei-Dro Clean 165UC Glassware Washer efficiently cleans and dries various labware, including beakers, bottles, flasks, and test tubes, with HEPA-filtered forced air drying, customizable programs, and a user-friendly touch screen. It features a lower spindle rack with 25 positions, purified water rinse, and built-in water softener. The 3850ELP Autoclave, with a 65L chamber volume, operates without plumbing, recycles water, and offers 4 validated cycles and 16 custom cycles for versatile sterilization. Together, they ensure thorough cleaning and reliable sterilization for all your labware and research needs. INCLUDED: The Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle includes: - Hei-Dro Clean 165UC Glassware Washer - Tuttnauer 3850ELP Autoclave - Lower Spindle Rack W/ 25 Positions - 10 Glassware Holders - Upper Standard Rack - Purified Water Rinse - Spray Arm Monitoring - Autoclave Stand - Detergent: 023213791 - Neutralizer: 023213793 - Water Softener Salt - Chamber Brite: 023212803 - Printer Paper (Pkg. of 5): 023212200 - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 20-200ul Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 0.60/0.80/1.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V Chamber Volume 5 (more)0L Sterilization Temperature Range 105C to 135C Chamber Dimensions 11.8" x 28" (30 cm x 71 cm) Features - Space-saving design with lid opening upward. - Fully automatic drying cycle for solid loads uses heat and vacuum for faster and more efficient drying. - Lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or when the temperature exceeds 97°C. - Pre-vacuum cycle - vacuum pump removes air from the chamber when sterilizing solids such as glassware and pipette tips, thereby eliminating cold spots, and ensuring faster and more efficient sterilization. - One-touch lever to easily open and close chamber lid. - Liquid cycle for media and agar. - Process display shows the program progress selected and status of the sterilization cycle. - Cycle for wastes and glassware without drying. - Bacteria filter reduces re-contamination. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. The HVP-50 Autoclave (with a 50-L chamber) is a self-contained, portable floor model mounted on casters. It occupies minimum floor space, operates at 120V, and can fit conveniently into many locations in the laboratory. Its many uses include the sterilization and drying of glassware, pipette tips, lab coats, wastes and also liquids such as agar and media. The HVP-50 can accommodate a 10-L fermenter, a 15-L carboy, a 19” x 24” biohazard bag, six 1-L flasks, twenty-one 500-mL bottles, 180 x 20-mm test tubes in two stacked baskets, or 270 x 13-mm tubes in three stacked baskets.INCLUDED: The Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

CS 60 BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extracto (more)r cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Scilogex Block, used for 15mL tubes, 8 holes 50mL x 4 block, 28.7mm dia. x 75mm depth. Used inconjun (more)ction with the Scilogex's Digital Thermal Dry-Baths. INCLUDED: The Scilogex Block, used for 15mL tubes, 8 holes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISLDMPHDGL Incubating Shaker The Ohaus ISLDMPHDGL Incubating Light Duty Shaker with Opaque Lid (more) is designed to incubate samples from 5° ambient to 65° C depending on the model are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLD04HDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks and comes with an opaque lid for light sensitive samples. The ISLDMPHDGL features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload.INCLUDED: The Ohaus ISLDMPHDGL Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISLDMPHDGL Incubating Shaker Specifications Temperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(5) { background-color: #fffacd; }

The FlashGel system for fast RNA/DNA Electrophoresis. Lonza FlashGel Dock, for use with all FlashGel (more) Cassette types.

Temperature range: 3°C to 16°C Dimensions (WxDxH): 597 x 615 x 820 mm Internal dimensions (WxDxH): 4 (more)40 x 435 x 670 mm Capacity: 130 litres

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW