Thermo Sorvall SS-34 Fixed Angle Rotor RC 5 6 Plus Evolution 8x50ml

Brandnew. Excellent condition - Excellent price. 12 months warranty. Delivery Scope: - 100x Base pla (more)tform - 100x Microscope slide - 100x Filter card 9,5 mm - 100x Filter card 12,5 mm - 100 x Insert - 100x 2.2ml PP tube with a lid Tested suspension types: - Natural biological fluids such as cerebrospinal fluid, body cavity fluids, synovial fluid, discharges, pus, etc. - Suspensions in isotonic smear solutions, tissue puncture specimen, expectorations, bronchial washings, etc. Features and benefits: - Obtaining of an equal cellular preparate and supernatant from the same sample of tested biological suspension. - Obtaining of specimen (cytospin) by way of filtering the supernatant onto a filtering paper. - Rapid placement of cells on a microscope slide by centrifugal metod with permeation of supernatant onto a filtering paper. - Possibility of supernatant recover on a microscope slide by automatic drain off into a test tube. - Prevention of aerosoling by securing fluid escape into the centrifugal chamber. - Avoidance of infections by application of single-use inserts.

Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets The Eppendorf S-4-72 Swing Bucket Rotor with  (more)250ml Buckets, (Catalog #: 5804746007) is a medium capacity swing-bucket rotor with speeds up to 4,200 RPM and a maximum RCF of 3,234 x g. The S-4-72 Buckets can accept a broad range of adapters to handle all common tube formats from 0.2ml to 250ml. This rotor is designed for use with the Eppendorf 5804/R and 5810/R Centrifuges. The Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets are in their original box and in new condition. (Please Note: The adapters pictured above are NOT INCLUDED. Please refer to the Additional Product Accessories section above if you may require adapters). INCLUDED: The Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets includes: - S-4-72 Swing Bucket Rotor - 4 x 250ml Round Buckets - Full 1 Year Parts and Labor Warranty Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets SpecificationsMaximum Speed4,200 RPMMaximum RCF3,234 x gMaximum Capacity4 x 250mlRadius16.4 cmCentrifuge CompatibilityEppendorf 5804/R and 5810R CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Eppendorf A-2-DWP Microplate Rotor with Buckets for 5804/R & 5810/R The Eppendorf A-2-DWP Micro (more)plate Rotor features two deep well-platebuckets, which can each hold up to two plates for simultaneous processing of upto 192 samples. Reaches speeds of 3,700 RPM with a max RCF of 2,250 x g. Thisrotor can accommodate MTP, cell culture plates, DWP, or filtration plate kits.The A-2-DWP can be used with Eppendorf centrifuge models 5804, 5804R, 5810, or5810R. INCLUDED: The Eppendorf A-2-DWP Microplate Rotor with Buckets for 5804/R & 5810/R includes: - Two Deep Well Microplate Buckets - Full 1 Year Parts and Labor Warranty Eppendorf A-2-DWP Microplate Rotor SpecificationsMax Rotational Speed3,700 rpmMax RCF2,250 x gMax Capacity2 x 5 MTP; 2 x 4 cell culture plates; 2 x 2 DWP; 2 x 1 filtration plate kitsAutoclavable121°C for 20 minutesCompatibilityEppendorf 5804/ 5804R/ 5810/ 5810R

Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 Eppendorf 7x50ml Buckets for A-4-81 Rotor (more), Cat # 022638614. This is a 4 piece set, and the adapters are new in the packaging. The Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 are for the A-4-81 Rotor in the 5810/R Centrifuges. INCLUDED: The Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 includes: - Full 6 Month Parts and Labor Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

AM4 Digital is the solution for laboratories that need precise control of sample temperature and max (more)imum reproducibility. Among its qualitative features we can find the possibility of connecting the Pt100, Pt1000 probes and the VTF digital thermoregulator, for accurate and direct control of the sample temperature. The CerAlTop™ plate, in aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface, as well as high resistance to chemical agents and scratches. Designed to last and give you the comfort you need in the laboratory, the AM 4 Digital Multi-Position Magnetic Stirrer is covered by a 3-year warranty (online product registration required). In short: - Ceramic coated aluminum alloy - Electronic speed regulation up to 1500 rpm. - Stirring volume (H2O) up to 20 liters per position. - Temperature up to 310°C. - Connections for PT100, PT1000 and VTF 1 - Aluminum alloy plate with ceramic coating  2 - Main switch 3 - Speed ​​control knob 4 - Temperature control knob 5 - Visualization A - Probe LED B - Temperature setpoint LED The powerful brushless motor ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The consistently precise stirring speed, from chemical reactions to sample preparation, is adjustable from 50 to 1500 rpm for volumes up to 20 liters (H2O). The LED displays will always allow you to easily read the values, from any angle. For maximum precision, by connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C up to a maximum of 300°C. In this regard, various accessory packages are available. You will find all the combinations at the bottom. Safety during heating: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm The new spherical caps replace the oil baths and heating mantles. They adapt perfectly to both the 135 mm plate and the shape of the tubes, ensuring rapid heat transfer. To improve protection and reduce heat loss, VELP has designed new PTFE covers. The MultiAlublock™ and new MonoAlublock™ solutions are ideal for carrying out multiple stirring and heating analyzes in laboratories with limited space and time. Download the dedicated brochure for the complete list.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Key features: High precision measurements Stability over Time Calibration and Strict Quality Control Versatility of Applications Cylindrical shape Nominal value: 10 g

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips Max. Speed 7 (more),000 RPM Max. Capacity 8 x 1.5/2.0ml micro-tubes Driving Motor DC Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. EZee mini centrifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - 8 Place 1.5/2.0ml Microtube Rotor - 16 x PCR Tube Rotor - 0.2/0.5ml Tube Adapters - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco Product Shelves, Short, 3 shelves, 10.0 " dia. x 9.8 " h Three removable, 10 in. diamet (more)er aluminum shelves with 1/4 in. rim Shelves slide into stainless steel support Includes 3 rubber feet Design allows for flexible shelf height spacing Shelf can be placed in freezer to prefreeze sample for quick loading Designed to fit inside the following options: 16-Port DryingChamber, Large Clear Chamber, Large ClearChamber with Valves, Short Clear Chamber,Short Clear Chamber with Valves, Tall ClearChamber, Tall Clear Chamber with Valves. Also available: Heated shelves that include ambient to +40C (+104°F) variable heat control on models manufactured 2016 and earlier and up to +60C (+140°F) on models 2017 and later INCLUDED: The Labconco 7317100 Product Shelves, Short, 3 shelves, 10.0 " dia. x 9.8 " h includes: - Rubber Feet x 3 - Manufacturer's Documentation - 1 Year Manufacturer's Warranty