Thermo Scientific Catalyst Express C500D Robotic Arm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Refurbished Universal 32 R Refrigeration Centrifuge. 6 months warranty. Scope of delivery: - Hettich (more) 32 R refrigerated centrifuge - Swing-out rotor Hettich type 1624 - 4  round bucket - Various adapters on stock (additional costs apply)

Taylor Wharton CX500 Liquid Nitrogen Dewar This was removed from a university lab where it was surpl (more)us to requirements. The unit is in good cosmetic condition with minor marks but has not been tested.

Gerhardt Soxtherm S306A SE-3A Extraction System + SE-VA Variostat This system was removed from a uni (more)versity lab where it was surplus to requirements. The unit powers on through the controller, but the controller does not seem to control the main unit. It is in fair condition,with visible signs of age. The springs are rusted, but all glass components and coils are in good condition. Due to the working and cosmetic condition, this system is listed as Spares/Repair. Specifications:- Gerhardt Variostat Controller - Model: SE-VA - S/N: 4012129 - Gerhardt Soxtherm Extractor - Model: S306A SE-3A - S/N: 4012160

Statebourne Crogenics Biostor 5 Liquid Nitrogen Dewar This was removed from a university lab where i (more)t was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Internal Dimensions are: D 70cm x W 40cm. It has 5 storage containers each with 9 draws & 1 storage container with 7 draws.

22 x High Perfection LP1090-36-GG-290 These were removed from a university lab where they were surpl (more)us to requirements. The units are all inside open boxes and are all in good cosmetic condition. We were unable to test them Model LP1090-36-GG-290Part No. 20-3406 REV: A Power supply dims:L32cm x W6cm, x H4cm

Memmert IN750plus Natural Convection Incubator 749L, 115V Setting Temperature Range +20 to +80 °C C (more)onvection Type Natural Convection Chamber Volume 749 L (26.4 cu.ft.) Features - Set temperature range from +20 to +80°C, with a working range of at least 5°C above ambient - Precise temperature control with a resolution of 0.1°C, adjustable in Celsius or Fahrenheit - Advanced Control Technology with the ability to adjust parameters including air flap position, program time, and time zones - Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber, ensuring a contaminant-free environment - AutoSAFETY system with integrated over- and undertemperature protection (ASF) and an audible/visual alarm for reliable safety - Durable interior made of stainless steel with deep-drawn ribbing and protected heating elements on all four sides - High-capacity chamber load of up to 661 kg with adjustable stainless steel shelving for flexibility in storage - Exterior constructed from textured stainless steel, providing superior resistance to corrosion and wear The Memmert IN750plus Natural Convection Incubator 749L, 115V offers an exceptional combination of precise temperature control and safety features for high-capacity applications. With a spacious 749-liter chamber, this incubator provides a temperature range from +20°C to +80°C, ensuring that your samples remain consistently within the desired conditions. The dual high-definition TFT-color displays of the ControlCOCKPIT adaptive digital PID-microprocessor controller allow for easy monitoring and adjustments. For enhanced precision, the system utilizes two Pt100 Class A sensors in a 4-wire circuit to mutually monitor temperature, ensuring optimal conditions even in demanding situations. The incubator also includes a fixed sterilization program for the working chamber, with 4-hour cycles at 160°C to maintain a sterile environment. Safety and durability are key features of the Memmert IN750plus. The AutoSAFETY system provides over- and undertemperature protection by automatically adjusting according to setpoint values, with alarms to alert users in case of deviations. The exterior is constructed from durable, textured stainless steel that resists corrosion and wear, while the interior features deep-drawn ribbing and large-area heating on all four sides for consistent heat distribution. The interior's stainless-steel design enhances the incubator’s longevity and hygiene, making it ideal for temperature-sensitive applications in laboratories and industrial settings. Additionally, adjustable shelving allows for flexible sample arrangements and can support a maximum chamber load of up to 661 kg, ensuring versatility for diverse lab requirements. INCLUDED: TheMemmert IN750plus Natural Convection Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The series of standard electromagnetic modules of high resolution, MAS.1, is intended for integratio (more)n into customer’s weighing systems. The high resolution MAS.1 module operates on the basis of electromagnetic force converter. Thanks to its compact design and integrated electronics the module can be both adapted into technological lines and installed inside customers' devices. By cause of high measurement accuracy, it is recommended to install the module inside customer's instrument (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MAS.1 module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space,, Internal adjustment, Various options of hardware configuration.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.