Thermo OGS 750 Trockenschrank Wärmeschrank Drying Oven 250°C 774L (2021)

Grant Instruments BTA Dry Block Heating System for 24 tubes Easy and precise temperature setting Hea (more)ting range ambient + 5degC to 100degC, with rapid heat-up time Stability and uniformity +/- 0.1degC Capacity : 24 tubes of 15ml Compact, sturdy design

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it w (more)as surplus to requirements. The unit is in reasonable cosmetic condition with some marks from use. It has not been tested. There are 6 Racks inside with drawers that hold 5ml tubes.

WEG CFW -11 Venture Inverter Control Box Lab This item was removed from a university where it was su (more)rplus to requirement. It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The key is not included but can be opened with a standard control cabinet key. Includes manual. The unit has no cable so is sold for spares/repairs

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39808 MSE Centaur 2ITEM-39805 Sorval TC6 ITEM-39837 Sartorius BP 11 ITEM-35985 Micromeritics sedigraph 5100 ITEM-35986 Ibm personal system 2 model 30 [condition: Used]ITEM-35987 Epson FX-850 [condition: Used]ITEM-35990 IBM Personal system 2 monochrome display [condition: Used]ITEM-35991 Techne Genius [condition: Used]ITEM-38936 Howe GyroVap [condition: Used]ITEM-36540 Sartorius Startoclear Depth Filter Maxicaps [condition: Used]ITEM-39844 MJ Research DNA Engine Tetrad 2 PTC Peltier Thermal Cycler Lab [condition: Used]ITEM-38938 Heraeus Rotor & Buckets [condition: Used]ITEM-38939 3Com baseline Switch 2816 [condition: Used]ITEM-37437 Cryofusion Liquid CO2 Back up system [condition: Used]ITEM-37441 UVP UV/White Convertor Plate [condition: Used]ITEM-36544 IKA Vibrax VXR [condition: Used]ITEM-36552 Bruker BSPS 12 80 2 WS1212316ITEM-36554 Philips CD650 CD player [condition: Used]ITEM-36005 Invitrogen E-Gel iBase Safe Imager + iBase [condition: Used]ITEM-18758 BOC Edwards Speedivalve SP25K N 9Bar Fluoroelastomer Diaphragm Valve Lab [condition: New]ITEM-36008 Milli-Q Q pod [condition: Used]ITEM-39860 Capp CR-MI1 ITEM-39861 Ohaus Pioneer pa2102cm ITEM-39865 Bio Rad Benchmark PlusITEM-39866 Grant FH16-D ITEM-39867 Gilson 305 Pump ITEM-39868 Sartorius BP 3100S ITEM-39869 Sartorius 1212 MP ITEM-39870 Restek Electronic Flow Calibrator ITEM-36014 Box of Thermo Fisher HPLC Parts [condition: Used]ITEM-36015 Security guard hplc guard cartridge system [condition: Used]ITEM-36016 Lot of PCR equipment [condition: Used]ITEM-36017 2 x GelBond PAG Film [condition: Used]

Memmert UN260 Natural Convection Oven 256L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 256 L Features - Spacious 256 L (9 cu.ft.) stainless steel chamber for diverse sample sizes - Temperature range from +5°C above ambient to +300°C for various applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature control - SingleDISPLAY digital PID-microprocessor with high-definition TFT color display - Natural convection system provides uniform heating throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air - Supports up to 9 stainless steel grids, with a max load of 263 lbs - Auto diagnostic system and overtemperature monitor for enhanced safety The Memmert UN260 Natural Convection Oven 256L, 115V offers versatile laboratory heating with a spacious 256 L (9 cu.ft.) stainless steel chamber, ideal for a range of sample sizes. Its temperature range from +5°C above ambient to 300°C and precise control, enabled by a Pt100 sensor DIN class A in a 4-wire circuit, ensure optimal accuracy. Equipped with a SingleDISPLAY digital PID-microprocessor and high-definition TFT color display, this oven makes temperature adjustments intuitive and precise. The natural convection system promotes uniform heating, and the electronically adjustable air flap allows controlled pre-heated fresh air intake. Built to support up to 9 stainless steel grids with a maximum load of 263 lbs, the UN260 also includes an auto diagnostic system and overtemperature monitor for safe, reliable operation in demanding environments. INCLUDED: The Memmert UN260 Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph Hei-FLOW Ultimate 600 Peristaltic Pump The ability to switch between precise dosing and fas (more)t conveying make this pump model the perfect complement to a reactor system. With a flow rate of 2.0 - 4,056 ml / min, when operated with single-channel pump heads, flows from feed-batch and chemostat modes of operation can be conveyed precisely. Rapid filling and emptying of the reactor system is also possible. In addition to the selectable process parameters - speed, tubing diameter, flow quantity display, dosing volume, interval dosing and break times - the pump conveying characteristics are stored in the program. Thanks to the analogue and digital (RS 232) interfaces, processes can be automated. All media is conveyed with a control accuracy of ±2% at a speed of 24 — 600 rpm. An optional foot switch can be connected for dosing by foot pressure. Click Here to View Product Video INCLUDED: The Heidolph Hei-FLOW Ultimate 600 Peristaltic Pump includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Gilson DISPENSMAN 10mLDISPENSMAN is a bottle-top dispenser for convenient, safe, and precise deliver (more)y of common laboratory solutions and solvents. Its innovative, three-position nozzle controls the dispensing of liquids, the removal of air in the system to avoid liquid loss, and includes an anti-drip safety feature that returns liquid to the bottle. Make volume changes quickly and easily with no need to open bottles, decreasing chances of contamination. Five DISPENSMAN models are available covering volume ranges from 250 µL to 50 mL.Accurate and Reproducible DispensingQuickly and easily dispense just the liquid needed with a precise volume setting. The built-in recalibration mechanism ensures reproducibility. Avoid any loss of liquid with the recycle position and recirculation valve for purging air.Safe and Easy to UseKeep your bench and other devices safe with the anti-drip system and the return of liquid into the bottle after use. The sliding volume adjuster enables simple one-hand operation and volume adjustment.Flexible • Adaptable to every type of liquid with an easy calibration • Universal chemical compatibility for many applications • Numerous bottle adaptors • Fully autoclavable at 121°CINCLUDED: The Gilson DISPENSMAN 10mL includes: - Two Year Manufacturer's Warranty