Thermo Fisher Sorvall SS-34 Fixed Angle Rotor RC 5E 5C 6 Plus Evolution 8x50ml

Eppendorf A-4-62Swing Bucket Rotor (buckets not included) for 5810/R The Eppendorf A-4-62 Rotor is a (more)n all-in-one swinging bucketrotor with a maximum speed of 4,000 rpm and RCFof 3,200 x g. The A-4-62 has awide range of adapters available to accommodate varying tube sizes. This rotoris used with Eppendorf centrifuge models 5810 and 5810R. Buckets are not included. INCLUDED: The Eppendorf A-4-62 Swing Bucket Rotor for 5810/R includes: - Full 1 Year Parts and Labor Warranty Eppendorf A-4-62 Rotor SpecificationsMax Rotational Speed4,000 rpmMax RCF3,200 x gCapacity4 x 250 mlCompatibilityEppendorf 5810/ 5810RAutoclavable121°C for 20 min

Eppendorf 50ml Buckets for A-4-44 Rotor Eppendorf 50ml Buckets for A-4-44 Rotor Cat # 022637452, ne (more)ver used, new in box. The Eppendorf 50ml Buckets for A-4-44 Rotor is used in the Eppendorf 5804/R and 5810/R Benchtop Centrifuges. INCLUDED: The Eppendorf 50ml Buckets for A-4-44 Rotor includes: - Full 6 Month Parts and Labor Warranty

BECKMAN COULTER JLA-10.500 Aluminum Angle Rotor Max: 10,000 rpm, 18,600 x g Capacity: 6 x 500 mL Com (more)plete, with 6 buckets K-Factor: 2,850 Nominal Capacity: 3,000 mL For use with Avanti J-Series and J2-Series centrifuges (except J-21 Series)

IKA Ministar 20 Control Overhead Stirrer Speed Range 0/50 to 2,000 RPM Viscosity Max. 10,000 mPas S (more)tirring Quantity Max. 15 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 10,000 mPas and volumes of up to 15 l - Continuously adjustable speed between 0/30 – 2,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself: Click Here to View Product Video INCLUDED: The IKA Ministar 20 Control Overhead Stirrer includes: - MINISTAR 20 control - R 300 shaft protector - Fasten screws for R 300 (2x) - H 67.60 Temperature sensor, stainless steel - Chuck Key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 20 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)15 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLCDSpeed range0/50 - 2000 rpmViscosity max.10000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft20 Ncm Speed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm3 ±%Stirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmTorque displayyesSpeed controlelectronicNominal torque0.2 NmTorque measurementtrendDeviation of torque measurement I3 ±NcmTimeryesTimer displayLCDTime setting range0 - 6000 minTemperature measuring range-10 - 350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)70 x 193 x 154 mmWeight1.56 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

The Envirco MAC 10 fan filter unit, was the first (FFU) to combine low sound, low watts and a low pr (more)ofile. Measuring only 51 dBA, the MAC 10 Original Standard (600 mm x 1210 mm) provides one of the lowest sound levels of any FFU in the industry. Running at only 310 watts at 90 fpm, the unit uses less energy than traditional FFUs, lowering operating costs. The MAC 10 Original maintains a low profile, measuring less than 330 mm. MAC 10 Original comes standard with the filter integral with the unit housing, requiring the unit to be removed from the ceiling grid to replace the filter. The RSR unit has the filter sealed to the unit using the knife edge/gel seal construction, allowing the filter to be replaced from the roomside. The RSRE unit has the added feature of allowing the motor blower and filter to be replaced from the roomside. Low sound, low watts, low profile, and low operating costs. Three speed switch features low, medium, and high settings; standard on all 2 ft x 4 ft units Solid state speed controller standard on 2 ft x 2 ft, 2 ft x 3 ft, and all RSR units. Forward-curved centrifugal fan. High Efficiency Particulate Air (HEPA) UL900 Filter: 99.99% efficient at 0.3 Micron. Snap-in prefilter allows for easy replacement and maintenance. Walkable Plenum (excluding prefilter), rated at 250 lbs. Mill finished aluminum exterior. Tested to IEST recommended standards. Caution this is a 110 Volt instrument.

Balance of the AS X7 series is an advanced analytical weighing device of the SYNERGY LAB line. The A (more)S X7 is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS X7 analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Colour Touch Screen The latest generation touch panel of 7” diagonal stands for comfort of operation, even when you have laboratory gloves on. The AS X7 analytical balances guarantee simple and intuitive communication due to wide selection of widgets. The widgets can be freely configured in accordance with user needs. Screen customization favours access to information and results directly from the home screen. The user can configure a complete set of buttons and assign it to a particular operation mode. He(she) can also define info and text fields. LevelSENSING System The in-built sensors measure tilt, and display graphic message on the weighing device screen. In accordance with GLP and GMP, the LevelSENSING system simplifies the adjustment, ensures an ongoing control of the level and informs about deviations. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. SMARTLab AS X7 balances are equipped with a SMARTLab system of an extensive functionality. It ensures support and supervision over the mass measurement process and reduces hazard of error caused by so called „human factor”. Automatic adjustment Regardless of external ambient conditions, the automatic internal adjustment system guarantees 100% efficiency in eliminating balance sensitivity deviations. Sensors Touch-free operation and programmable sensors facilitate daily work and reduce the range of actions performed during the weighing procedure. Alibi memory Data safety is assured with the ALIBI memory, which is integrated into AS X7 balances. The memory enables record of up to 500 000 weighings and guarantees continuity of data collection over a long period of time. Wi-Fi Remote control of the balance via devices, operation of which is based on Android, IPhone, Windows10 systems. Data control Accessing information in the balance depends on the user's permission level. The administrator can manage three different permission levels. Automatic Weighing Records Reports on processes and partial weighings can be generated and sent for archiving via the USB to external devices. Ambient Conditions Monitoring Communication with RADWAG thermo-hygro-barometer allows monitoring of ambient conditions such as temperature and atmospheric humidity. Databases Information system of the AS X7 balances is based on 7 databases that enable operation of many users with numerous products, all the stored data can be subjected to analysis. Weighing data is recorded in 7 databases: • Operators (max 100 entries), • Products (max 5 000 entries), • Weighings (max 50 000 entries), • Packaging (max 100 entries) • Formulations (max 100 entries), • Customers (max 1000 entries), • ALIBI memory (max 512 000 weighings). Additionally it is possible to create formulation reports (max 500 reports). Communication Interfaces The functionality of AS X7 balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, DB9 tara/print, Ethernet, Wi-Fi. The additional USB port located on the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS X7 balances are equipped with Kensington Lock, which allows to secure the device against theft. Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

USBECK Aluminum Spindle Lift 20 x 20 cm Lifting Stand, Laboratory Lifting Table Tabletop dimensions: (more) 200 x 200 mm With traces of wear