Soxtec Avanti 2050 Auto Fat Extraction System Lab

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

This CEM MDS-2100 Microwave Digestion System was removed from a university lab where it was surplus  (more)to requirements. The item powers on and is in reasonably good cosmetic condition.Unable to test as it requires manual calibration, no previous calibration settings saved. We were unable to do this at our facility. Exhaust diameter: 75 mmRotor with 12 positions for 12 digestion vessels, lining PTFE, capacity appr. 300 mL - (Not included) Internal Dimensions:DX37WX39HX24cm

Armfield PCT Process Control Teaching System Lab This system was removed from a university where it  (more)was surplus to requirement. All units are in good cosmetic condition and power on independently, it has not been tested as a full system. The lab confirmed it was in full working order prior to removal. Included are; -Armfield PCT-9 Process System (Powers on)Fair cosmetic condition -Armfield Pressure Control AccessoryFair cosmetic condition -Armfield PCT 13 Temperature control module (not powering on)Poor cosmetic condition -Armfield Process Controller (Powers on)Fair cosmetic condition

Ohaus PR124 analytical balance with draft shield The PR Series Precision and Analytical Balances ens (more)ure competitive performance at an affordable price and offer accuracy and repeatability in essential weighing applications in the laboratory, industrial and educational environments. Equipped with RS232 connectivity for easy communication, a backlit display and a simple interface for easy operation, the PR series scales are perfectly designed for your workstations. Applications Basic Weighing, Piece Counting, Percent Weighing Display Backlit liquid crystal display (LCD) Operation AC adapter (included) Communication RS232 (one port included) Structure ABS upper armor, removable stainless steel plate, removable glass screen with sliding top door, integrated weigh below hook, safety bracket, calibration lock Construction features User selectable environmental filters, brightness adjustments, auto tare, auto dimming, user selectable measuring range adjustment points, software lock and reset menu, user selectable communication settings and print options , user-configurable project and user ID, software overload and underload protection indicator, stability indicator Find out how to navigate the Ohaus PR series menu:

Heraeus B12 incubator. Temperature range from ambient +5ºC to 70ºC. Heating time 40 min at 37 °C. 13 (more)1 L capacity. Natural convection. internal glass. Digital. Timer function to activate/deactivate the incubator. Stainless steel interior. Microprocessor control. 2 trays. Maximum load per shelf: 20 kg. Rear RS 232 port. External dimensions (LAF) 696*850*540mm; internal 552*610*390mm. weight 55 kilos User manual.emperature range from ambient +5ºC to 70ºC. Capacity 131 L. Natural convection. Internal glass. Digital. Microprocessor control. 2 trays. Manual. Features Specifications

Beckman Avanti Model J-25 Refrigerated Centrifuge This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a JA20 rotor (Not included). It worked well up to the tested speed of the rotor's max of 20,000rpm. The refrigeration works well. It is in reasonably good cosmetic condition with some minor marks.

Ohaus FC5515R Frontier Micro Refrigerated Centrifuge w/ Selectable Rotor Speed Range 200 to 15,200 R (more)PM Maximum Capacity 44 x 1.5/2.0ml or 12 x 5ml Warranty 2 Year Manufacturer's Features - Easy-to-turn rotary knob for parameter adjustments - Waterproof keypad provides protection that helps significantly increase the lifespan of the product - One-touch toggling between speed, g-force, and temperature controls - Refrigeration capabilities from 40°C to -20°C - Cools down from 23°C to 4°C in less than 10 minutes - Pre-cool feature quickly lowers temperature of the rotor and chamber before a run - LCD display which projects information in real-time - View and adjust user parameters from the main screen; no need to navigate through sub-screens - Powerful induction motor reaches speeds up to 15,200 RPM in less than 16 seconds - Maximum g-force of 21,953 RCF - 10 acceleration/deceleration settings - 99 memory sets for commonly used speed and time settings - Motorized lid-locking system prevents centrifuge from opening during operation - Rotor imbalance sensing system stops the motor should the rotors become imbalanced, protecting the user from spinning rotors Click Here to View Product Video The Ohaus FC5515R Frontier Micro Refrigerated Centrifuge provides high-speed operation for spin-down applications requiring a wide variety of tube volumes and capacities. With refrigeration capabilities, 10 acceleration/deceleration settings, multiple safety features, and an unmatched capacity, the FC5515R provides stable liquid separation for life science applications requiring high-speed operation. The intuitive control panel with rotary knob puts the centrifuge’s simple operations at your fingertips, including the ability to set and recall speed and g-force, as well as control the temperature. A powerful brushless induction motor, 10 acceleration and deceleration settings, and memory for up to 99 commonly used parameters are a few of the FC5515R’s features that propel high-performance. Among the FC5515R’s safety attributes are a motorized lid locking system and a rotor imbalance sensor that stops the centrifuge if the rotors become imbalanced or sudden shock occurs, protecting the operator from by the high-speed spinning rotors. Compatible with seven different rotors, more than any centrifuge in its class, the highly versatile FC5515R can be used for various applications of different volumes. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5515R Frontier Micro Refrigerated Centrifuge w/ Selectable Rotor includes: - FC5515R Frontier Micro Refrigerated Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus AX224/E Adventurer Analytical Balance The OHAUS Adventurer is a precision instrument, designed (more) to address both routine and specialized weighing needs in modern laboratories. Its interface boasts a 4.3" VGA graphic touchscreen, ensuring intuitive operation. Adhering to GLP/GMP standards, it integrates a three-tier user management system. Communication is streamlined with RS232, USB Host, and USB Device ports, with real-time clock data output capabilities.Constructed for longevity, it comprises a metal base, ABS top housing, and a stainless steel pan. Key design attributes include selectable environmental filters, auto tare functions, and user-definable calibration points. It supports user-specific communication configurations, data print options, and offers a selection of up to nine operating languages.INCLUDED: The Ohaus AX224/E Adventurer Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

4-place microplate clamps on aluminum platform Speed Range: 150 – 1000 rpm Speed Accuracy: ±1 rpm Lo (more)ad Bearing Capacity: 5 kg Timer: 0 min to 99 hrs. 59 min Orbit: 2.5 mm Dimensions (DxWxH): 415 x 293 x 143 mm Platform Dimensions (DxW): 320 x 260 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW