Sartorius Arium 611 UV Ultrapure Water System

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MVE XLC 230 Liquid Nitrogen Dewar This was removed from a university lab where it was surplus to re (more)quirements. The unit is in reasonable cosmetic condition with marks from use but has not been tested. It comes with 6 storage racks each with 8 draws. Internal Dimensions are: D70cm x W40cm.

Biosafe Smart-Max AS-310 Automated Stem Cell Cyroprotectant System Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powers on, but the screen remains blank. Also, it fails to communicate with a PC and emits a burning smell. Therefore, it is listed as Spares/Repair.

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it w (more)as surplus to requirements. The unit is in reasonable cosmetic condition with some marks from use. It has not been tested. There are 6 Racks inside with drawers that hold 5ml tubes.

This Qiagen QIAsymphony Nucleic Acid Purification System was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and we have run a series of maintenance programs on the unit. They all appeared to work exactly as they should.As far as we can tell, the unit is in full working order.  The lab reported it was fully working prior to removal. We are unsure of exact date of manufacture, but the first part maintenance was done in 2016, so it will be 2015-2016 age. We have all the passwords to access it.It is in very good cosmetic condition with only limited marks from use. Unit dimensions - L126 W84 H183cmInside storage - D66 W64 H54cmAdjustable shelf. List of Consumables:-22 x Packs of Sealed Filter-Tips 200ul B (4 x 32 per pack)1 x Part used packs of Filter-Tips 200ul B (2 x 32)Box of 8 Sealed Packs of Filter-Tips 200ul B (4 x 32 per pack) (box unsealed)3 x Sealed boxes of Sample Prep Cartridges, 8-Well (QTY 336 per box)2 x Unsealed but full box of Sample Prep Cartridges, 8-Well (QTY 336 per box)9 x Unboxed Sample Prep Cartridges, 8-Well (QTY Unknown)4 x Sealed Boxes of Filter-Tips, 1500ul (QTY 1024 per box)5 x Sealed packs of unboxed Filter-Tips, 1500ul (4 x 32 per pack)2 x Part used packs of Filter-Tips, 1500ul (QTY 174 altogether)1 x Sealed Boxed DSP Circulating DNA Kit (ref. 937556)2 x Sealed Boxes of 8-rod Covers (144 per box)1 x unsealed Box of 8-Rod Covers (QTY 132)2 x Unboxed packs of 8-Rod Covers (QTY 24)4 x Bags of Accessory Troughs (3 x 5 Packs, 1 x 3 pack - QTY 18)4 x Sealed boxes of RNA Kit (QTY 192 per box)3 x Boxes of Insert D=13 (QTY Unknown)5 x Boxes of Insert 2.0ml (QTY Unknown)1 x Installation Cartridge kit (Boxed with other various pieces)1 x Boxed O-ring Change Tool Set4 x Blue Tube Racks4 x Bags of 3.5ml Tubes (QTY 100 per bag)1 x Part bag 3.5ml (QTY Unknown)1 x Wasp Bar Code Reader4 x SIC -01 Carrier Tubes Sample TrackTub of mixed spares1 x Grey unknown pieceWaste drawer safety lock partsWaste Bags

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Gilson Pipetman L P2L 0.2- 2 uL, Metal Ejector Pipette Designed for performance and comfort, PIPETMA (more)N® L comesin a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettesconfidently in your applications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volumerange from 0.2 μL to 10 mL - Variable volume multichannel models covering a volumerange from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR)at the bottom of the tip holder for a proper fit with most tip brands, coveringa volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volumerange from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines anergonomic design with minimized pipetting forces, giving you the ability topipette longer without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you. Secure PipettingReduce pipetting errors and avoid accidental volumechanges during pipetting cycles with a true volume-locking mechanism forimproved accuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals. Choose Your Tip EjectorFor single channel models, choose between a model with astainless-steel tip ejector or a plastic ejector, depending on your needs andapplications. GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P2L 0.2- 2 uL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P2L 0.2- 2 uL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range0.2-2 µLPipette ModelP2LPipette RangePIPETMAN LNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote